Jump to content

Recommended Posts

  • Members
Posted

We finally bought a sewing machine! Thanks for all those who have answered my previous questions. Now the fun part, learning how to use it :) 

We bought it from a lady who makes purses and wanted more room (she has a Pfaff 1245 and Adler 269-373). We paid 430 Euro ($500) with Jack servo and flat table attachment. She used it with thick threads and the stitches look good. She also gave me the number of her mechanic so he can come adjust it for us. 

It worked great when I tested it but I am already running into problems...to be expected since this is our first sewing machine. 

Can anyone tell me if this is a 69-373? The model plate is gone.

It seems the the top right tension spring is missing and the tension release is not working. I am trying to get a list of parts to order. If anyone sees some parts missing or set up wrong please let me know, I would appreciate it!

I also have some very basic questions, should I post questions here or start a new topic? 

Thanks!

 

IMG_0018.jpg.a18d6c2b7a443451f3393260c20779fb.jpg

IMG_0026.jpg.0cb81bec60d4538e93e0adc0d3fc3384.jpg

IMG_0027.jpg.abce4ce7f3a88159df3f137dba2671e4.jpg

IMG_0028.jpg.30a56aaebaa28d3d085a3d2e2dcc5a62.jpg

IMG_0031.jpg.2fa2ab0cbdd196377430fff01976f865.jpg

IMG_0032.jpg.9ec1c372854990c15865446b8e08cae6.jpg

 

Machines in use: Ellegi (Atom GL12 ) skiving machine, Durkopp Adler 69-373 sewing machine

Atelier Zander: Website    Instagram

  • Replies 27
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • Members
Posted

Check your threading, looks like you are bypassing the check spring.

  • Members
Posted
2 minutes ago, R8R said:

Check your threading, looks like you are bypassing the check spring.

Thanks! I think I see what you mean. Are you talking about the tension spring on the far left (the one with the wire loop).? I took these photos as the previous owner had it threaded. When I rethreaded it I put the thread under that spring/wire.

Machines in use: Ellegi (Atom GL12 ) skiving machine, Durkopp Adler 69-373 sewing machine

Atelier Zander: Website    Instagram

  • Members
Posted (edited)
12 minutes ago, R8R said:

When you say "top right tension spring" which part do you mean exactly? Close up pics help. 

Threading vid:

https://www.youtube.com/watch?v=_J1b57wIdIQ

 

 

Thanks! I have watched that video. I think I have it threaded right. 

I have attached a photo with the tension part I am talking about. In the parts diagram it shows a few more rings (edit: disks) and a spring. I just have one disk (more like a washer). Do I need to have this spring and disks here?

I aslo removed the screw just below and left of the part in red. This was preventing the tension from releasing when you lift the foot....not sure why they did that?

 

IMG_0021_marked.jpg

Edited by arz

Machines in use: Ellegi (Atom GL12 ) skiving machine, Durkopp Adler 69-373 sewing machine

Atelier Zander: Website    Instagram

  • Members
Posted

 You did not mention what exactly is wrong?? 

  • Members
Posted

It should go under that check spring (wire loop),

Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500.

Chinese shoe patcher; Singer 201K (old hand crank)

  • Members
Posted

Yeah this is not threaded correctly, please watch the vid and go through each step, it's pretty clear. The thread needs to go under the check spring wire.

Also yes that first disc is a pre-tensioner and it needs a spring to operate correctly, although you can compensate for it in the meantime by threading it through all the holes of the thread post on top of the machine. (each loop through adds a little tension)

  • Members
Posted
7 hours ago, dikman said:

It should go under that check spring (wire loop),

Yes I understand. As I said in a post above, this photo was taken when I just got the machine (as the previous owner had it), and I rethreaded it as in the video. Thanks!

7 hours ago, R8R said:

Yeah this is not threaded correctly, please watch the vid and go through each step, it's pretty clear. The thread needs to go under the check spring wire.

Also yes that first disc is a pre-tensioner and it needs a spring to operate correctly, although you can compensate for it in the meantime by threading it through all the holes of the thread post on top of the machine. (each loop through adds a little tension)

Thanks! That is what I wanted to know. I will order the rest of the parts for that first tension discs.

Machines in use: Ellegi (Atom GL12 ) skiving machine, Durkopp Adler 69-373 sewing machine

Atelier Zander: Website    Instagram

  • Members
Posted

I bought what looks like the same machine a week ago.  My first industrial!  Exciting right?

Warm regards,

Mark Skiba

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...