Work Bench Lighting

[Brokenolmarine]

I bought two goose neck led floor lamps from Hobby Lobby, that are two stage: bright enough and super bright for detail work.  I started with just one coming in from my left. I quickly found that invariably at the most critical juncture, the work was in shadow.  On her next trip for quilting material, Miss Tina picked up a second light to come in from my right.  HOLD the power on button, the light ramps up to OMG bright, hold it again, drops back to bright. 

Good lighting is a blessing for old eyes.  Floor lamps don't bounce around when you are pounding on the bench at 120 beats per minute beveling a border. 

[Frodo]

I use a cheap clamp on light for close up work

I straightened out the factory bend on one leg of the clamp. Then statigically drilled holes where needed

I move the light  where needed by inserting the. Straightened wire in a hole