Members JC2019 Posted May 19, 2019 Members Report Posted May 19, 2019 I am realizing that while I will be okay with hand sewing small items, for larger Items I would like to investigate the potential of getting a used machine, or at least one that is good to start. The main Item I would like to work on would be bags / backpacks, etc. I would be looking at the used market but my main concern would be that it's not an obscure machine. Instead one that is popular and well understood with plenty of information for troubleshooting and use. If such machine exists that would be great, not sure how much it would cost but I'd rather spend less to start. Is a budget of $700-1200 reasonable? Quote
Members nylonRigging Posted May 19, 2019 Members Report Posted May 19, 2019 (edited) Your in CA. . don't know your exact Addy. And if you were to drive over and pickup yourself . but if you were to go ( new machine ) . and good everyday workhorse, walkfoot, with Juki parts reasonable and plentiful . Alberoni over in Anaheim, has ( Juki DU-1181 ) for 1150-$ . And that would keep your in your budget for buying a new machine about shipping cost, if you cant drive to pickup . for example last time I bought from them . shipping a new machine on truck ( farther than you would need ) , up I-5 N. to Portland OR. was right about 140-$ . . Edited May 19, 2019 by nylonRigging Quote
Members JC2019 Posted May 19, 2019 Author Members Report Posted May 19, 2019 1 hour ago, nylonRigging said: Your in CA. . don't know your exact Addy. And if you were to drive over and pickup yourself . but if you were to go ( new machine ) . and good everyday workhorse, walkfoot, with Juki parts reasonable and plentiful . Alberoni over in Anaheim, has ( Juki DU-1181 ) for 1150-$ . And that would keep your in your budget for buying a new machine about shipping cost, if you cant drive to pickup . for example last time I bought from them . shipping a new machine on truck ( farther than you would need ) , up I-5 N. to Portland OR. was right about 140-$ . . Ah, that's interesting. I don't know much, but I do know Juki is a good brand? Is that what you have? What kind of projects is it's "sweet spot"? I'll have to research it more. If I wanted to do smaller items on it I would have to buy some adapter to reduce the speed? I am in northern california so I would need it shipped. I wonder which shipping carrier they use Quote
RockyAussie Posted May 19, 2019 Report Posted May 19, 2019 For bags and backpacs and wallets etc I would try and find a cylinder machine to start with like a Pfaff 335 or Adler 69 or there are a lot of clone copies of these that some of the sponsors on this site could help you out with. The 2 I mention here have a small cylinder diameter around 46mm there abouts and come in handy when you have tight areas to get into. Many use a table top attachment with these to give them in affect a flat surface to work on. Quote Wild Harry - Australian made leather goodsYouTube Channel Instagram
Members nylonRigging Posted May 19, 2019 Members Report Posted May 19, 2019 ( other good brands also ) but Juki is a good brand and they build off of common parent machine designs that are widely used world wide, so part are everywhere and reasonable price . also (rockyaussie) said that the small cylinder bed copies is a good choice also, and he is correct . It all just depends 'what you want to sew' when you start your purchase . ( IMHO ) .. I always recommend that a person buys on there 1st purchase a good everyday workhouse, and then build there other machine stations around it . Your daily workhorse is the machine most jump behind used everyday for doing your work . Your everyday workhorse choice besides have good selection of produced parts and a design machine that is not going away anytime soon . It also needs to have a good common produced selection of Presser Feet, of different size/shape available . Or at least a supply of reasonable price presser feet for you to cut and shape trim to your liking . . Quote
Members JC2019 Posted May 19, 2019 Author Members Report Posted May 19, 2019 13 hours ago, RockyAussie said: For bags and backpacs and wallets etc I would try and find a cylinder machine to start with like a Pfaff 335 or Adler 69 or there are a lot of clone copies of these that some of the sponsors on this site could help you out with. The 2 I mention here have a small cylinder diameter around 46mm there abouts and come in handy when you have tight areas to get into. Many use a table top attachment with these to give them in affect a flat surface to work on. Ah yeah this is what I eventually would want, and then have the flat attachment to sew things like wallets. Sadly I am not seeing a lot of these machines here in the USA? I don't see any listed on ebay at least and that's usually how I try to gauge popularity of an item but maybe it's different for machines Quote
Members JC2019 Posted May 19, 2019 Author Members Report Posted May 19, 2019 1 hour ago, nylonRigging said: ( other good brands also ) but Juki is a good brand and they build off of common parent machine designs that are widely used world wide, so part are everywhere and reasonable price . also (rockyaussie) said that the small cylinder bed copies is a good choice also, and he is correct . It all just depends 'what you want to sew' when you start your purchase . ( IMHO ) .. I always recommend that a person buys on there 1st purchase a good everyday workhouse, and then build there other machine stations around it . Your daily workhorse is the machine most jump behind used everyday for doing your work . Your everyday workhorse choice besides have good selection of produced parts and a design machine that is not going away anytime soon . It also needs to have a good common produced selection of Presser Feet, of different size/shape available . Or at least a supply of reasonable price presser feet for you to cut and shape trim to your liking . . Is this the machine you have ? What do you use it for? It's within my budget and I am going to consider purchasing it depending on other suggestions. Thank you Quote
Members dikman Posted May 19, 2019 Members Report Posted May 19, 2019 Basically, you're looking at an upholstery-class walking foot machine, most typically have 3/8" clearance under the feet and will use #69 thread and may be able to run #138. A cylinder arm will certainly be more versatile but if you can't find one then a flatbed should still work. The usual suspects (used) are Singer 111/211 class, Consew, Seiko STH-8 series, Juki 563 - there are others, of course, but these tend to be the fairly common ones. If you buy used you'll need to factor in a servo motor if it doesn't come with one. Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
RockyAussie Posted May 19, 2019 Report Posted May 19, 2019 2 hours ago, JC2019 said: Ah yeah this is what I eventually would want, and then have the flat attachment to sew things like wallets. Sadly I am not seeing a lot of these machines here in the USA? I don't see any listed on ebay at least and that's usually how I try to gauge popularity of an item but maybe it's different for machines I have a wide range of machines but the one I use most is a small cylinder arm machine. They can do a wider range of operations than other machines and give professional results. This one here from Techsew called the 2600 is along the type I would start with. http://www.techsew.com/machinery/industrial-sewing-machines/cylinder-machines/techsew-2600-narrow-cylinder-leather-industrial-sewing-machine.html For just over $2000 I would consider their finance options. Quote Wild Harry - Australian made leather goodsYouTube Channel Instagram
Members nylonRigging Posted May 20, 2019 Members Report Posted May 20, 2019 (edited) 3 hours ago, JC2019 said: Is this the machine you have ? What do you use it for? It's within my budget and I am going to consider purchasing it depending on other suggestions. Thank you I dont run a Juki 1181, but I do run Juki double needles . but I would not hesitate for second to run a du1181 for full-time setup, it is a sound machine . My daily workhorse is a consew walker and bernina 217 setup in 2 station that I jump on the most everyday, but I run 6 other stations with singers, artisan, mitsubishi . also a serger head put up on the shelf that comes in handy once in a while . I been through a LOT of machines but my personal sew workspace is tightly limited to right at 7 to 8 sew stations at one-time, with keeping 2 cutting tables and shelved material and fabrics ..etc . New & Used .. Keep in mind also that the Consew rb206 is a BIG seller for a everyday workhorse and have huge following for a good reason . I see them used all over the place, with a good buys popping up regularly . And new heads under 1-K and full table setups starting in around the 1200-$ range . Also what ( dikman ) say's . ( For good used ) buy, If you run into one, I would not hesitate to setup a used 111 or 211 Singer . They are still to this day a Great machine . I see them popup for sale around here in the NW area and I really not looking for one, and I sure you can catch them around your area down south in CA. if you keep your eyeout for them because they are out there in huge numbers still being used . . edit add: you also asked on the one Post about shipping a machine . ..." I am in northern california so I would need it shipped. I wonder which shipping carrier they use ". When you have anyone ship a machine to you from anywhere in the US, normally truck shipping will not deliver to a residence and only business, and the driver and truck don't normally have a forklift to remove a large package anyway. So what happens is that whoever the person shipping is using for there carrier . a machine will be trucked to a local carrier terminal that the carrier is associated with in your town or a town close by . Then you just drive over and sign for it and pick your machine up there . . Edited May 20, 2019 by nylonRigging Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.