Members Cferna27 Posted July 1, 2019 Members Report Posted July 1, 2019 (edited) Hi everyone, new member long time viewer. I just recently acquired an Adler 205 MO 25 SF. and have some questions about the machine. Photo A. is the machine itself B. Is the pic. of the side lever. ( it does not go in reverse and the stitch length adjustor is located in the left / rear ) by the needle. C. Is the close up of the presser foot with (wires) attached to it leading to a (counter) box? D. Is the control front facia, Is the dial on the right a (Rheostat) for the motor speed adjustment? E. Is the close up of the presser foot wire connections. D. Is the stitch counter box? Got this one from a guy who won it in an auction. Then sold it to me. It works fine even with some of the wiring disconnected? Works best in (slow) cycles. Stitch counter is disconnected. Would like to find out about controlling the motor speed and if this Model have no reverse feature on it? Thanks again. C. Edited July 1, 2019 by Northmount Fixed Title Quote
Northmount Posted July 1, 2019 Report Posted July 1, 2019 @Cferna27 Moved your post to "Leather Sewing Machine". You'll get better response here. Your photos are too small to see any detail. Try posting individual photos. Tom Quote
Members Cferna27 Posted July 1, 2019 Author Members Report Posted July 1, 2019 Hi again, here is a bigger version Best, C. This one is the electronic panel. Trying to find out if this version cannot reverse? Quote
Members Cferna27 Posted July 1, 2019 Author Members Report Posted July 1, 2019 The presser foot, works well but it leaves a deep mark on the leather. I think this is what its use for? Quote
Moderator Wizcrafts Posted July 1, 2019 Moderator Report Posted July 1, 2019 That Adler is made to sew moccasins and moc style shoes. That is what the -MO indicates. You will have trouble sewing regular leather with that setup. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members Cferna27 Posted July 1, 2019 Author Members Report Posted July 1, 2019 Thanks again for the quick reply. C. Quote
Members Cferna27 Posted July 1, 2019 Author Members Report Posted July 1, 2019 That Adler is made to sew moccasins and moc style shoes. That is what the -MO indicates. You will have trouble sewing regular leather with that setup. Hi again, do you happen to know the use for that Dial on the right side of the electronic panel (page D.) . is that a Rheostat for controlling the motor speed? Thanks again, C. Quote
Moderator Wizcrafts Posted July 2, 2019 Moderator Report Posted July 2, 2019 10 hours ago, Cferna27 said: That Adler is made to sew moccasins and moc style shoes. That is what the -MO indicates. You will have trouble sewing regular leather with that setup. Hi again, do you happen to know the use for that Dial on the right side of the electronic panel (page D.) . is that a Rheostat for controlling the motor speed? Thanks again, C. No, I don't. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members dikman Posted July 2, 2019 Members Report Posted July 2, 2019 Do you have better photos of the switch box and motor? Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Members Cferna27 Posted July 3, 2019 Author Members Report Posted July 3, 2019 Hi, Here is the motor again. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.