Members YinTx Posted February 1, 2020 Members Report Posted February 1, 2020 Used some more Wickett and Craig bridle leather I had, along with some soft lining leather. Still room for improvement, but I'm not embarrassed this time around! Fil au Chinois thread, RiRi zipper. YinTx Quote YinTx https://www.instagram.com/lanasia_2017/ https://www.youtube.com/playlist?list=PLK6HvLWuZTzjt3MbR0Yhcj_WIQIvchezo
Members YinTx Posted February 1, 2020 Author Members Report Posted February 1, 2020 Some interior looks: Quote YinTx https://www.instagram.com/lanasia_2017/ https://www.youtube.com/playlist?list=PLK6HvLWuZTzjt3MbR0Yhcj_WIQIvchezo
Members sinpac Posted February 1, 2020 Members Report Posted February 1, 2020 Thats a nice wallet right there. Quote "It ain't about how hard you hit. It's about how hard you can get hit and keep moving forward." - Rocky Balboa
Members akguy59 Posted February 1, 2020 Members Report Posted February 1, 2020 I will give you my highest compliment. That is very "clean" looking. Absolutely beautiful. Quote
Members DJole Posted February 1, 2020 Members Report Posted February 1, 2020 Good work there! Nice attention to little details, nice stitching-- it will hard not to keep that piece for your very own! Unless, of course, it is your own now. ;-) Quote \D. Jole \ --> <http://djole.altervista.org/djole/Publications/Leather/Lindex.htm>
Members YinTx Posted February 2, 2020 Author Members Report Posted February 2, 2020 12 hours ago, sinpac said: Thats a nice wallet right there. Appreciate it! 12 hours ago, akguy59 said: I will give you my highest compliment. That is very "clean" looking. Absolutely beautiful. Thank you much! 8 hours ago, DJole said: Good work there! Nice attention to little details, nice stitching-- it will hard not to keep that piece for your very own! Unless, of course, it is your own now. ;-) Thanks! and I am hoping to sell it, we'll see how it goes. and I think I'd get a lot of frowns from those around me that are drooling on it hoping they get to use it if it won't sell... Plenty of room for improvement, things show up when you photograph them and look too closely, so I'll have to work on improving them in the future. But, I'm generally pleased with the outcome. YinTx Quote YinTx https://www.instagram.com/lanasia_2017/ https://www.youtube.com/playlist?list=PLK6HvLWuZTzjt3MbR0Yhcj_WIQIvchezo
Members Bawarrior Posted February 4, 2020 Members Report Posted February 4, 2020 Very nice work my friend Quote
Members YinTx Posted February 6, 2020 Author Members Report Posted February 6, 2020 On 2/4/2020 at 5:55 PM, Bawarrior said: Very nice work my friend Thank you so much! YinTx Quote YinTx https://www.instagram.com/lanasia_2017/ https://www.youtube.com/playlist?list=PLK6HvLWuZTzjt3MbR0Yhcj_WIQIvchezo
Members kamil111 Posted March 17, 2020 Members Report Posted March 17, 2020 I like the shape of the card slots. How did you cut that out? Great job Quote
Members battlemunky Posted March 17, 2020 Members Report Posted March 17, 2020 Man, @YinTx, that is a thing of beauty Sir! Quote
Members Oxbo Posted March 17, 2020 Members Report Posted March 17, 2020 Really, really awesome job ! ! ! ! Quote
Members Tugadude Posted March 17, 2020 Members Report Posted March 17, 2020 YinTx, your work impresses as always. Simple, clean, just classy. Anyone would be proud to carry that. And I mean simple in the best way, not that it was simple to make, but a clean, uncluttered design. And you used a creaser on the pockets which is one of my "likes". Quote
Members DrmCa Posted March 17, 2020 Members Report Posted March 17, 2020 I love it! Quote Machines: Mitsubishi DB-130 single needle, Kansai Special RX-9803/UTC coverstitch, Union Special 56300F chainstitch, Pfaff 335-17 cylinder arm walking foot, Bonis Type A fur machine, Huji 43-6 patcher, Singer 99 hand cranked, Juki DDL-553 single needle (for sale)
Members JayEhl Posted March 18, 2020 Members Report Posted March 18, 2020 wow, I'd be proud to have that in my pocket. well done! ~JL Quote
Members YinTx Posted March 30, 2020 Author Members Report Posted March 30, 2020 First of all, apologies for the delayed response. Life has been busy! I hope all have been safe and healthy. On 3/16/2020 at 8:01 PM, kamil111 said: I like the shape of the card slots. How did you cut that out? Great job The shape can be cut with a round knife or a die. and Thanks! On 3/16/2020 at 8:09 PM, battlemunky said: Man, @YinTx, that is a thing of beauty Sir! On 3/17/2020 at 6:52 AM, Oxbo said: Really, really awesome job ! ! ! ! Thank you both! On 3/17/2020 at 8:23 AM, Tugadude said: YinTx, your work impresses as always. Simple, clean, just classy. Anyone would be proud to carry that. And I mean simple in the best way, not that it was simple to make, but a clean, uncluttered design. And you used a creaser on the pockets which is one of my "likes". Thank you for that, clean is the look I was going for. Many don't like the detailed tooling look and want uncomplicated elegant simplicity. And I'm still trying to get good with my "new to me" creaser, practice helps! On 3/17/2020 at 11:24 AM, DrmCa said: I love it! On 3/18/2020 at 11:24 AM, JayEhl said: wow, I'd be proud to have that in my pocket. well done! ~JL Thanks to you both! Still for sale, haven't found a buyer yet... not that I've had a chance to advertise much! YinTx Quote YinTx https://www.instagram.com/lanasia_2017/ https://www.youtube.com/playlist?list=PLK6HvLWuZTzjt3MbR0Yhcj_WIQIvchezo
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.