Carved Hat Band Connection

[MikeRock]

Snaps or stitches would limit the expensive hat band to one hat size, or close.  The tongues are long enough to accommodate most hat sizes from the sixes to eights....  I'm thinking a tight loop and simple friction might be the solution.  KISS.....  but who knows.  Pedro knows!

[fredk]

That is true, but for why would you want it adjustable over a large range?

I wear the one size of hat. My different hats' thickness of material only varies but a couple of mm overall. One time I measured around 4 of my hats with the idea of making bands for them. The length of the band around only varied 5mm between the shortest and longest

[TomG]

On 7/25/2021 at 4:42 PM, Northmount said:

And this contributes what to the conversation.  You were asked to stay on topic.  Please do.

I believe that this user is saying that a small dab of glue under the tongue keeps it from moving. I agree. That would be the easiest and cleanest way to secure the hand size.
You could also use a small strip of Velcro the make it adjustable without showing.

 

[MikeRock]

I mentioned the tight loop because folks who buy his hat bands at a show do not all have the same hat size.  Hat bands must even change a bit in size as the hat ages on the head.

[chuck123wapati]

2 hours ago, MikeRock said:

I mentioned the tight loop because folks who buy his hat bands at a show do not all have the same hat size.  Hat bands must even change a bit in size as the hat ages on the head.

yea i dont think he would be stitching them they have to fit varying sizes. My guess is just a real tight loop. I round braided a hat band for myself and used a turks head tightly woven around both ends it doesn't slip a bit but can still be adjusted. Hat bands have very little movement or stress put on them so dont need much IMO.

[garypl]

11 hours ago, TomG said:

I believe that this user is saying that a small dab of glue under the tongue keeps it from moving. I agree. That would be the easiest and cleanest way to secure the hand size.
You could also use a small strip of Velcro the make it adjustable without showing.

 

I agree and I think a small dab of rubber cement would hold things in place yet allow easy future removal or adjustment.  Rubber cement in an application like this would not be a very strong bond.