TechSew 2700 forward/reverse

[JayEhl]

Thanks, @Wizcrafts   I called them just a bit ago and spoke to a very sweet lady on the phone who said she would send me something.   I am looking forward to it!

[Techsew Ron]

We no longer sell that motor (it's from 2014) but here are the motor direction instructions:

Motor Rotation Direction
Caution: Motor rotation direction should only be changed when using a machine that requires it
(coverstitch, blindstitch, overlock). By default, the direction will be set to counter-clockwise.
Operating your motor in the wrong direction can harm the inner components of your machine
and should be avoided. Only use the reverse lever on your machine (if applicable) to back-tack.
To modify the motor rotation direction:
1) Press and hold the ▼ (down) button for several seconds, until the screen reads “S.0”.
2) Press the ▲ (up) button 2 times, until you see “S.2”, then immediately press the ▼
button.
3) The screen will read “r.E” (regular rotation) or “r.P” (reverse rotation). Press the ▼ or ▲
button to change the setting. After 5 seconds, your chosen speed will be saved.

Edited October 7, 2021 by Techsew Ron

[JayEhl]

Thanks @Techsew Ron   I'll try that when I get home and will let ya'all know if that solves my problem.  

 

 

[JayEhl]

Boy I was so excited I had to post that it was a success!!   @Techsew Ron  and @Uwe  thank you very much!!    I took the instructions that was sent and from there it was as exactly as was described!!

Worked like it did at the shop before I brought it home!  So... part of my next steps after I got everything working without pressing the lever was to figure out why the thread wasn't picking up from the bobbin but I did think that once the forward vs reverse lever was figured out I thought it should just work....and it did!!   Wished someone else was there to take that picture of me!!     

I know some folks here get freaky about shared links and its totally understandable so ... spoiler alert, this is a link to my personal MS OneDrive share drive.  I uploaded the video from my phone.   Will a virus drop in your computer because you select the link?  These days nothing is 100% so .....  how does that go?  caveat emptor ?   

https://1drv.ms/v/s!AnZ0zsCyoIMZiBQA0uD66cLelBlu

I was just so proud of my self that my toy is FINALLY working that I had to made the video!!

Here are some pictures for those that don't care for the video link:

I would be hard pressed to tell you the ounce I had but I'm guessing 3/4?  The gray pieces is what the shop had laying around to show me that it was working.  I'm thinking it's at least 4/5 oz and its' doubled over.  So all together, that's pretty thick!    And don't mind the thread going everywhere.  I was too excited to go find my pair of scissors.  

Thanks again you guys!!  

 

 

[kgg]

8 hours ago, JayEhl said:

I was just so proud of my self that my toy is FINALLY working

That is great news.

kgg