Cumberland Highpower

Did you ever find parts for your machines? I have a machine like one of yours (light gray one). I took the table off and made some special parts to convert it to a different duty... Managed to crack a piece inside by tightening it too much and a machine shop made a replacement for me. The paint under the gray is black (mine was). Probably painted in a rebuild along the line...

I picked up a couple punches at a local distributor, thanks for the reply to my post "CS OSBORNE." The new 155 punches look identical to my old one, except they have threaded in tubes. Glad I had the manufacturer step in and back up my "claims" about the non threaded tubes in the 155 punches....:)

Hello, do you have these machines for sale still? there is one or 2 i am interested in.

Thanks for your reply Bruce. You know, the 155 I had for many years appeared to have non replaceable tubes in the wheel..They were pressed in. A sort of "taper" base instead of threads. I suspect it was an older 155 as I purchased it used. Had a nickel plate finish that tended to tarnish a bit. Was clearly marked CS Osborne on the side of the lower jaw, so no doubt of the maker.

I am going to purchase a Revolving Hand Punch for the occasional small job... I'm contemplating to purchase a Vergez Blanchard Rotary hand punch... I did have an Osborne 155 for about 20 years but it has gone AWOL. How does the Blanchard Revolving punch compare to to the Osborne 155 as far as fit/feel quality and use? Anyone think I'd regret a change?

Looking for a leather folding machine Preferably Italian.... Let me know what you have and what your asking as well as location. Thanks!

Hi Ray, It's a Galli FCE. The Galli FCE+2 has these and an electrical heat glazer as well I believe, But I do not have a +2 unfortunately....

Hello, I am trying to figure out what type of wheels to mount on a leather belt burnishing machine... The straps are edged on a NSB first... Do I use the felt/leather, or wooden wheels on my edge burnishing machine to slick it for edge painting? This machine comes with stone, felt/leather and wooden wheels, I am a bit confused as to what set to mount on the machine. My goal is to burnish so as to have a smooth finish for edge paint. Any advice is welcome!

Hello All, Looking for a Galli 2 or 4 head Burnisher. Please let me know what you have and price. Best! CS

Hello All, Acquired one Wednesday.

Hello, I am looking to buy a motorized edge painting machine for strap goods. (The style that has foam rollers and applies edge paint on both edges of a strap). Please contact me here or at slingworks@yahoo.com with what you might have.

Hello, I am looking for a set (actually 2 sets) of spacers for a Randall R 132, center to center of the knives 1-1/4 and 1-1/2" This is the older model Randall 14" with bottom knives. Please contact me with what you might have and price.

Hello Rus, Thanks for the reply to my posting. Actually I have aquired quite a few lately, so I thought to let everyone know. (I have 3 randalls and an additional 3 randalls for parts now). Best C S

Hello, I am looking to acquire a Randall strap beveler...But cant seem to find any around for sale? Does anyone have one for sale? Best CS

Hello, I used to have a 205-25, really not of much value... the have a drop feed dog, but not needle feed. They're sort of good for sewing heavier items, but without needle feed or unison feed, it's not really good for general leatherworking. I used mine to stitch small leather goods that didnt put a stress or load on the feed system. Basically a 205-25 is worth about $400....but nobody seems to really want them.

I guess nobody on this forum has a single phase atom?

Thanks for the input men, I do have a phase converter on my other atom, but to be honest I am kinda tired of them....I sure would like to just hook up single phase...

Thanks for the reply, Atom uses a single phase 1 hp with a cap. on the SE25...I have an atom part number in one of my parts books for it, the problem is that I do not have the original motor...It has been removed. All the motors are of the same frame, about all i know is that it's a "D" Class flange TEFC.....The atom part number in the parts list is just thier number, not a baldor catalog # I was hoping someone with a single phase atom could look on the motor and give me the catalog number and I could call baldor, or shop for a replacement

Hello, Anyone have a single phase atom SE25 Clicker? I am trying to find a model or catalog number of the Baldor Motor used on these clickers.... THanks in Advance!