CFM chuck123wapati Posted March 26, 2022 CFM Report Posted March 26, 2022 A customer wanted a western style holster for his 22 six shooter that had a cant to it and rode higher than a regular drop type holster so here is my try at it not much room on this little thing for a belt loop especially with a cant . He also wanted his old holster modified to fit it because he has two. It was for a saa and was just to large everywhere so i took an inch off the end and about 3/8 along the original stitch edge, shortened the belt loop an inch so it rides higher and re finished the edges and gave it some saddle soap lol. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Members MarlinDave Posted March 26, 2022 Members Report Posted March 26, 2022 What’s the finish on the new holster Chuck? Quote
CFM chuck123wapati Posted March 26, 2022 Author CFM Report Posted March 26, 2022 1 minute ago, 327fed said: What’s the finish on the new holster Chuck? i haven't applied the finish yet, it will be a couple coats of fiebings golden mink oil and a good buffing. It is a water proofing for outdoor gear. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Members jrdunn Posted March 27, 2022 Members Report Posted March 27, 2022 Chuck, I always like your holsters, no nonsense! Jim Quote
Members Charley1 Posted March 27, 2022 Members Report Posted March 27, 2022 Nice looking holster, nice, simple design. I make and sell a fair number of similar design. Folks seem to like keeping things simple. Quote
Members AzShooter Posted March 27, 2022 Members Report Posted March 27, 2022 I think you did a great job on both of them. Like the colors. Quote
Members MarlinDave Posted March 27, 2022 Members Report Posted March 27, 2022 Is the leather pre dyed or is that just NFO to darken it? Quote
CFM chuck123wapati Posted March 27, 2022 Author CFM Report Posted March 27, 2022 8 hours ago, jrdunn said: Chuck, I always like your holsters, no nonsense! Jim 7 hours ago, Charley1 said: Nice looking holster, nice, simple design. I make and sell a fair number of similar design. Folks seem to like keeping things simple. 7 hours ago, 327fed said: Is the leather pre dyed or is that just NFO to darken it? thank you guys yea i sell quite a few plain holsters and knife sheathes a lot of guys want the function and fit of hand made but no bling lol. 327fed I air brushed the dye after it was sewn up and formed , its canyon tan i wont use any nfo on this The mink oil product i use will darken it up some, i Apply a couple of hearty coats with the aid of a blow dryer. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM chuck123wapati Posted March 27, 2022 Author CFM Report Posted March 27, 2022 Here is a picture after the finish coat It will even out gradually aver a couple days and lighten back up a bit. Also tried to get a photo of the tapered welt. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Members Hags Posted March 28, 2022 Members Report Posted March 28, 2022 Very nice Chuck. Quote Not so retired RN. Living on the Washington Peninsula.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.