Jump to content

Recommended Posts

Posted
9 hours ago, fredk said:

The main problem I encounter (not too often though) is suppliers not keeping their stock records up-to-date and I put in my order only to be told days, or even weeks, later that what I've ordered is out of stock, and was when I ordered it. And even after that the supplier still lists that leather as 'in stock', available to order

On the other hand; one supplier, which I've used for a long time, will send me small samples, about 2 inches square, of leathers, foc, when I've asked for samples

Oh yes. Inaccurate stock records. Agreed. We deal with exactly the same issue. 



 

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Posted
7 hours ago, Doc Reaper said:

I don’t like it when they send you crap that they wouldn’t purchase if they were a regular customer!!!’

Is was a side of 5/6 ounce leather and I was charged for 27 square feet. The side had a hole in it that 2 larger folks could use as a hula hoop, I returned it by hand, the manager I spoke with said he sent it, even said how unblemished it was, when I unrolled it his mouth dropped open. At that point he found a great side and paid for my gas


I have personally dealt with awful pieces which would never be able to be used as well. 
 

7 hours ago, Klara said:

I hate it when shipping cost goes UP with order value. Intellectually I realise that I have to pay the shipping somehow, but I'm still more likely to order if shipping is free. Or free above a certain amount. 


For most things over a certain amount you make enough that shipping can be free. Totally agree. Flatrate shipping up to xyz, then free after.

 

 

7 hours ago, Handstitched said:

@Gulrock You don't say where you are located ? 

Here in Australia, the biggest problem is....we don't have enough tanneries, and not enough suppliers ...therefore, up goes the cost, because most of it comes from O/S. Freight costs is something no-one can control . 

Here in Oz, our " express post" used to be just that, express, sent out the next day..or so . But now , "express" =   :dunno: sometime next week ?? 

Suppliers need to be more descriptive in their ads . Describing what each item is used for, tools , materials etc.   especially for the newbies entering the world of leather.  

Some things are simply out of anyone's' control. But they need to keep on top of what they have, and double check the orders. I've already have a few stuff ups this week because someone didn't read the order properly , and I end up with the wrong size, or wrong product . 

But,on the plus side, they do their best to correct their mistakes, with no additional cost.. They haven't asked for me to send the incorrect item back , they let me keep it/them. They are courteous and polite , well, those that I deal with are  :) 

Good luck in your venture .

HS

 


Located in New Jersey, USA. I agree there's a lot of misinformation on tools, or just images with no description why you need it. 

 

7 hours ago, fredk said:

Double wrap and pack orders.

#1 company wraps hides inside each other and with heavy duty wrapping paper integral to the roll. This is wrapped in a corrugated card wrap.  Then this is put into a plastic tube bag of heavy industrial plastic, then this is put into another bag of the same. Small items such as buckles have been bagged and put into the centre of the roll. Never any damage to anything upon arrival.

#2 company rolled 3 hides individually, with a piece of lightweight brown wrapping paper around each. These were put into a not very substantial card box and one piece of parcel tape to keep each end of the box closed. A bag of buckles, conchos etc was just placed in one end of the box. One end of the box burst partially open during transit. Fortunately not the end with the bag of fittings. But on a previous occasion it had been and the supplier had to send me the fittings again.

Good point. Obviously thicker leathers have the issue of not being able to be tightly wound, but the thinner stuff should absolutely be able to be wound around a tube and secured. 

 

2 hours ago, Tequila said:

I purchased some veg tanned leather from a supplier that offered splitting.  The splitter must’ve had a problem because it was obvious that some of it had an extra layer of hide on it. To me that’s a sign of quality control, and I’ll be hesitant to buy from them again.  And no I didn’t call and tell them, I couldn’t wait another 10 days to get another piece, on the plus side the leather face was very good (holes, scars, etc.).  So for me quality control is important, if I get charged a premium price I expect a premium product. 

Customer Service:  I’m tired of hearing excuses.  If you have a “Contact Us” section I would hope that you have someone to answer the phone/respond to email. 

Website: Keep it uncomplicated.  I really like vendor’s sites that allow you choices to view leather by weight, tannage, cut, etc.  If I’m looking for 2oz veg I don’t go through pages of chrome, and heavy weight stuff.  I looked at a vendor’s site recently that didn’t list the tannage, so you didn’t know if you were looking at veg or chrome tanned  

Tools:  People are different; not everyone wants expensive high end tools/equipment, but others are willing to pay for a quality product, clearly labeled choices are nice.  If you’re going to sell stamps seeing a picture of what the stamp looks like on leather with a ruler to show the size is nice. 

Hope some or all of this helps.

It does help. 

I think website organization and allowing customers to filter their search by tannage/weight/etc. The truth is, that's a really simple thing. Same website tool as when you're buying a car and filtering for the right product.

Customer communication is huge. They're bread and butter and I hate when I can't get on the phone when there's an order. 

A splitter is not in our plan right away. Maybe something in the future. 

  • CFM
Posted

i don't have issue with selling low grade leather if you are honest about it. My biggest issue and i wont give folks a second chance is selling low grade leather for higher grade leather. If you say its b grade for example it better be. This is something that is done frequently i feel by some companies either because they don't want to hassle with sending crap back to their supplier or some times intentionally.

Last thing i want to hear is if you don't like it just send it back. I wont waste any more of my time to send it back so the seller can pawn it off again to some unknowing schmuck. But i will leave the review and not buy again and i have mentioned it on this forum as well as anyone willing to listen.

My true to life example , i ordered leather that was advertised mid grade which should be something along low b or c i under stood there would be bad spots, bug bites and a brand no big deal i knew there would be waste but what i received was d grade or even worse, leather that was mostly waste, the grain side almost totally shredded by some machine during the tanning  process. the damn thing shouldn't have even left the tannery. Herman oak to boot! For your own good don't ruin your reputation or the tanneries rep by passing that crap on.

Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms.

“I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!

Posted
2 hours ago, chuck123wapati said:

i don't have issue with selling low grade leather if you are honest about it. My biggest issue and i wont give folks a second chance is selling low grade leather for higher grade leather. If you say its b grade for example it better be. This is something that is done frequently i feel by some companies either because they don't want to hassle with sending crap back to their supplier or some times intentionally.

Last thing i want to hear is if you don't like it just send it back. I wont waste any more of my time to send it back so the seller can pawn it off again to some unknowing schmuck. But i will leave the review and not buy again and i have mentioned it on this forum as well as anyone willing to listen.

My true to life example , i ordered leather that was advertised mid grade which should be something along low b or c i under stood there would be bad spots, bug bites and a brand no big deal i knew there would be waste but what i received was d grade or even worse, leather that was mostly waste, the grain side almost totally shredded by some machine during the tanning  process. the damn thing shouldn't have even left the tannery. Herman oak to boot! For your own good don't ruin your reputation or the tanneries rep by passing that crap on.

I too believed that some companies are "regrading" leather to make a quick buck. This is a hill I will die on. 

We've gotten leather that is so messed up that was advertised at A grade that I didn't believe it was possible. For instance we once bought a W&C side that had a gouge down the middle, advertised A grade. I have photos of it somewhere and will upload if I find it. 

 

  • Members
Posted

I'd suggest offering different shipping options at the customer's choice.  Where I live, USPS all too often loses things.  When they don't loose them, the simply leave them on my front steps on a fairly busy street, with no knock and no notification.  Things get stolen that way.  UPS and FedEx tend to do a far better job of actually knocking at the door and sending a notification as the package is delivered if nobody can answer the knock right away.  Your customers know who does a good job at deliveries and who does not, let them choose.  It should also help you to avoid having to replace things that go missing before they are received, saving you over-all.

When shipping liquids, put them in a zip-lock bag or something to avoid them messing up everything else in the box if it the bottle should get broken in transit.  You may have to replace that item, but won't have to replace everything else when that happens.

And... Agree what all I've seen above as well!

- Bill

  • Members
Posted

I agree with billybopp, only where I live the normal postal service is the most reliable. I am not happy if I am forced to use UPS or similar...

Posted
11 hours ago, billybopp said:

I'd suggest offering different shipping options at the customer's choice.  Where I live, USPS all too often loses things.  When they don't loose them, the simply leave them on my front steps on a fairly busy street, with no knock and no notification.  Things get stolen that way.  UPS and FedEx tend to do a far better job of actually knocking at the door and sending a notification as the package is delivered if nobody can answer the knock right away.  Your customers know who does a good job at deliveries and who does not, let them choose.  It should also help you to avoid having to replace things that go missing before they are received, saving you over-all.

When shipping liquids, put them in a zip-lock bag or something to avoid them messing up everything else in the box if it the bottle should get broken in transit.  You may have to replace that item, but won't have to replace everything else when that happens.

And... Agree what all I've seen above as well!

- Bill

 

2 hours ago, Klara said:

I agree with billybopp, only where I live the normal postal service is the most reliable. I am not happy if I am forced to use UPS or similar...



Definitely multiple shipping options. We find that USPS has lost a handful of packages as well. 

  • Members
Posted

There's a online company that has a video on each product page of a guy handling the leather. Nice way to see temper, color under room lights, and thickness that pictures often can't show.

One thing that I like from fabric/apparel suppliers is information on whether an item is reorder-able or not. There's times I've planned work around a particular leather that's suddenly not available anymore and it's product page has disappeared.

Posted
1 hour ago, LoveLock said:

There's a online company that has a video on each product page of a guy handling the leather. Nice way to see temper, color under room lights, and thickness that pictures often can't show.

One thing that I like from fabric/apparel suppliers is information on whether an item is reorder-able or not. There's times I've planned work around a particular leather that's suddenly not available anymore and it's product page has disappeared.


So that's a good point - is it a short-stock item? Or is it a planned restock able.

Good advice. 

  • Members
Posted

@Gulrok so when should we plan on seeing your new site up and running?  Are you planning on having an announcement?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...