Members Gezzer Posted May 29, 2023 Members Report Posted May 29, 2023 I saw a guy on you-tube do this and it turns out pretty good if you are looking for a ribbon border or such . Quote
AlZilla Posted May 29, 2023 Report Posted May 29, 2023 I've tried to do that and just can't get it to turn out. I think one of the members here did this or something similar about the time I joined up. Quote “Those who can make you believe absurdities can make you commit atrocities.” - Voltaire “Republics decline into democracies and democracies degenerate into despotisms.” - Aristotle
PastorBob Posted May 30, 2023 Report Posted May 30, 2023 Yeah, I saw that video. I took a stab at it, and for the life of me, couldn't get it. I will need to try again. Quote In God's Grace, Pastor Bob "While we were yet sinners, Christ died for us." - Romans 5:8 www.PastorBobLeather.com YouTube Channel
Members Gezzer Posted May 31, 2023 Author Members Report Posted May 31, 2023 @AlZilla and @PastorBob Seems to me the " trick " is the width of the lay - out lines . This one was .190 and worked , I did another with a full 1/4 inch ( .250 ) lay -out and it didn't turn out as well . Of course the size of beveler is going to make a difference too . 203 was what I used . Quote
AlZilla Posted May 31, 2023 Report Posted May 31, 2023 @chuck123wapati was it you that did this border a while back? Quote “Those who can make you believe absurdities can make you commit atrocities.” - Voltaire “Republics decline into democracies and democracies degenerate into despotisms.” - Aristotle
CFM chuck123wapati Posted May 31, 2023 CFM Report Posted May 31, 2023 10 minutes ago, AlZilla said: @chuck123wapati was it you that did this border a while back? yea I think i posted this. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM chuck123wapati Posted May 31, 2023 CFM Report Posted May 31, 2023 9 hours ago, Gezzer said: @AlZilla and @PastorBob Seems to me the " trick " is the width of the lay - out lines . This one was .190 and worked , I did another with a full 1/4 inch ( .250 ) lay -out and it didn't turn out as well . Of course the size of beveler is going to make a difference too . 203 was what I used . yup the width, in looking at mine i just realize the width of the lay out lines is about equal to the width of the camo tool, i will try a few later and see if there is a correlation that would make sense. I just went with what seemed right I too would like to know a secret tip to make it easier to plan. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM Frodo Posted May 31, 2023 CFM Report Posted May 31, 2023 Wowser that’s cool, Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles
Members Gezzer Posted May 31, 2023 Author Members Report Posted May 31, 2023 1 hour ago, chuck123wapati said: yea I think i posted this. I had forgot you doing those , looks good !! 33 minutes ago, chuck123wapati said: yup the width, in looking at mine i just realize the width of the lay out lines is about equal to the width of the camo tool, i will try a few later and see if there is a correlation that would make sense. I just went with what seemed right I too would like to know a secret tip to make it easier to plan. There might be some formula , may just depend on playing with what tools one has . @JWheeler331 Thanks . Quote
AlZilla Posted May 31, 2023 Report Posted May 31, 2023 (edited) 1 hour ago, chuck123wapati said: yea I think i posted this. Yep, that's what I saw. If you figure out a formula, I'm all ears. I really like the ropes top and bottom of the right hand side on the bottom piece, too. Can't do that one, either. Edited May 31, 2023 by AlZilla Quote “Those who can make you believe absurdities can make you commit atrocities.” - Voltaire “Republics decline into democracies and democracies degenerate into despotisms.” - Aristotle
CFM Frodo Posted June 1, 2023 CFM Report Posted June 1, 2023 This is what interests me, How did you achieve that 3-D look? Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles
CFM chuck123wapati Posted June 1, 2023 CFM Report Posted June 1, 2023 4 hours ago, Frodo said: This is what interests me, How did you achieve that 3-D look? its how you use the beveler, just at the point where the two camo stamp impressions come together at the vee, on this you can see i used a cross hatch beveler to make the impression Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM Frodo Posted June 2, 2023 CFM Report Posted June 2, 2023 14 hours ago, chuck123wapati said: its how you use the beveler, just at the point where the two camo stamp impressions come together at the vee, on this you can see i used a cross hatch beveler to make the impression Dang Chuck, I M looking at what you did and am thinking it is straight forward. Then I make mine look like piggy poo lol I have a huge amount of practice ahead of me here are a couple of designs using 2968 and 0830 and a z/s349 in the flower center Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles
CFM chuck123wapati Posted June 2, 2023 CFM Report Posted June 2, 2023 1 hour ago, Frodo said: Dang Chuck, I M looking at what you did and am thinking it is straight forward. Then I make mine look like piggy poo lol I have a huge amount of practice ahead of me here are a couple of designs using 2968 and 0830 and a z/s349 in the flower center i like those that one on the bottom would make a nice border. i need more stamps or more time or something lol. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM Frodo Posted July 22, 2023 CFM Report Posted July 22, 2023 I found an interesting stamp today while I was f—- up lol. Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles
AlZilla Posted July 22, 2023 Report Posted July 22, 2023 19 minutes ago, Frodo said: I found an interesting stamp today while I was f—- up lol. You must have been something because that impression doesn't look at all like the stamp. The stamp looks more open than the cross bars in the impression. Quote “Those who can make you believe absurdities can make you commit atrocities.” - Voltaire “Republics decline into democracies and democracies degenerate into despotisms.” - Aristotle
Members YinTx Posted July 22, 2023 Members Report Posted July 22, 2023 56 minutes ago, AlZilla said: You must have been something because that impression doesn't look at all like the stamp. The stamp looks more open than the cross bars in the impression. two impressions, rotated stamp. Quote YinTx https://www.instagram.com/lanasia_2017/ https://www.youtube.com/playlist?list=PLK6HvLWuZTzjt3MbR0Yhcj_WIQIvchezo
CFM Frodo Posted July 22, 2023 CFM Report Posted July 22, 2023 1 hour ago, AlZilla said: You must have been something because that impression doesn't look at all like the stamp. The stamp looks more open than the cross bars in the impression. you see it now? Same stamp rotated Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles
CFM Frodo Posted July 22, 2023 CFM Report Posted July 22, 2023 Same stamp rotated 3 times see the point in the center? Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles
AlZilla Posted July 22, 2023 Report Posted July 22, 2023 I see it. Creative genius at work ... Quote “Those who can make you believe absurdities can make you commit atrocities.” - Voltaire “Republics decline into democracies and democracies degenerate into despotisms.” - Aristotle
CFM Frodo Posted August 16, 2023 CFM Report Posted August 16, 2023 I was doodleing and this popped up Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles
CFM Frodo Posted August 16, 2023 CFM Report Posted August 16, 2023 Spacing your letters The traditional method is to set the letter stamp adjacent to the other stamp like this This in my opinion leaves a gap in between the letters I place the edge of the stamp next to letter look at the two examples upper is the traditional method lower is the way I do it the space is about a 1/16” (1.58mm). Which is not a lot but it looks better to me Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles
Members Wepster Posted August 16, 2023 Members Report Posted August 16, 2023 2 hours ago, Frodo said: Spacing your letters The traditional method is to set the letter stamp adjacent to the other stamp like this This in my opinion leaves a gap in between the letters I place the edge of the stamp next to letter look at the two examples upper is the traditional method lower is the way I do it the space is about a 1/16” (1.58mm). Which is not a lot but it looks better to me To my eye, I too prefer the proportional spaceing we get generally with computer (or typesetting) letters, rather than the monospacing a typewritter delivers. Quote
CFM Frodo Posted August 16, 2023 CFM Report Posted August 16, 2023 Man, You are not going to guess what this stamp is here is a hint, stamp is rotated 90 degrees Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.