Members Gezzer Posted May 29, 2023 Members Report Posted May 29, 2023 I saw a guy on you-tube do this and it turns out pretty good if you are looking for a ribbon border or such . Quote
AlZilla Posted May 29, 2023 Report Posted May 29, 2023 I've tried to do that and just can't get it to turn out. I think one of the members here did this or something similar about the time I joined up. Quote “Those who can make you believe absurdities can make you commit atrocities.” - Voltaire “Republics decline into democracies and democracies degenerate into despotisms.” - Aristotle
PastorBob Posted May 30, 2023 Report Posted May 30, 2023 Yeah, I saw that video. I took a stab at it, and for the life of me, couldn't get it. I will need to try again. Quote In God's Grace, Pastor Bob "While we were yet sinners, Christ died for us." - Romans 5:8 www.PastorBobLeather.com YouTube Channel
Members Gezzer Posted May 31, 2023 Author Members Report Posted May 31, 2023 @AlZilla and @PastorBob Seems to me the " trick " is the width of the lay - out lines . This one was .190 and worked , I did another with a full 1/4 inch ( .250 ) lay -out and it didn't turn out as well . Of course the size of beveler is going to make a difference too . 203 was what I used . Quote
AlZilla Posted May 31, 2023 Report Posted May 31, 2023 @chuck123wapati was it you that did this border a while back? Quote “Those who can make you believe absurdities can make you commit atrocities.” - Voltaire “Republics decline into democracies and democracies degenerate into despotisms.” - Aristotle
CFM chuck123wapati Posted May 31, 2023 CFM Report Posted May 31, 2023 10 minutes ago, AlZilla said: @chuck123wapati was it you that did this border a while back? yea I think i posted this. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM chuck123wapati Posted May 31, 2023 CFM Report Posted May 31, 2023 9 hours ago, Gezzer said: @AlZilla and @PastorBob Seems to me the " trick " is the width of the lay - out lines . This one was .190 and worked , I did another with a full 1/4 inch ( .250 ) lay -out and it didn't turn out as well . Of course the size of beveler is going to make a difference too . 203 was what I used . yup the width, in looking at mine i just realize the width of the lay out lines is about equal to the width of the camo tool, i will try a few later and see if there is a correlation that would make sense. I just went with what seemed right I too would like to know a secret tip to make it easier to plan. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM Frodo Posted May 31, 2023 CFM Report Posted May 31, 2023 Wowser that’s cool, Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles D.C.F.M
Members Gezzer Posted May 31, 2023 Author Members Report Posted May 31, 2023 1 hour ago, chuck123wapati said: yea I think i posted this. I had forgot you doing those , looks good !! 33 minutes ago, chuck123wapati said: yup the width, in looking at mine i just realize the width of the lay out lines is about equal to the width of the camo tool, i will try a few later and see if there is a correlation that would make sense. I just went with what seemed right I too would like to know a secret tip to make it easier to plan. There might be some formula , may just depend on playing with what tools one has . @JWheeler331 Thanks . Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.