TomE Report post Posted January 31, 2024 Pit of despair. Sewing a zipper into the heel of a riding boot. First time installing a zipper. I welcome your tips and advice. My double stick tape didn't stick to the leather so I used a dab of Barge cement on the bottom and binder clips to hold the zipper for sewing. I hand sewed the zipper into the heel then used a machine for the rest. Quote Share this post Link to post Share on other sites
DieselTech Report post Posted January 31, 2024 Nice work. Looks great. That looks real difficult to do thou. Outstanding work. Quote Share this post Link to post Share on other sites
Dwight Report post Posted February 1, 2024 When I do zippers . . . I use Weldwood and contact cement them into place . . . Works great. You just have to be sure to use two coats most of the time . . . May God bless, Dwight Quote Share this post Link to post Share on other sites
Goldshot Ron Report post Posted February 1, 2024 Amazing the work you do. Zippers scare me, but I have sewn them into cantle bags. Easy stuff compared to your boots. I use rubber cement when sewing them, and the clips like you used. The cement is just to hold the zipper in place while sewing. Quote Share this post Link to post Share on other sites
TomE Report post Posted February 1, 2024 (edited) 17 hours ago, DieselTech said: Nice work. Looks great. That looks real difficult to do thou. Outstanding work. Thanks. Just tedious work. All's well that ends well. I am told there's a robust market for replacing these zippers on boots costing $300-$500+. This one was learning/practice done for a friend. I think I'd charge $80 for the repair. About 1 hr per boot with the hand sewing. Not sure if a patcher could sew around the heel end of the zipper. I used a small cylinder arm machine to finish sewing the sides. 13 hours ago, Dwight said: When I do zippers . . . I use Weldwood and contact cement them into place . . . Works great. You just have to be sure to use two coats most of the time . . . May God bless, Dwight Thanks, @Dwight. Another fellow pointed me to a strong adhesive basting tape sold by Wawak sewing supplies. It appears to be heavier tape than the double sided tape sold by office supplies. If it works it would be faster than glueing. 13 hours ago, Goldshot Ron said: Amazing the work you do. Zippers scare me, but I have sewn them into cantle bags. Easy stuff compared to your boots. I use rubber cement when sewing them, and the clips like you used. The cement is just to hold the zipper in place while sewing. Thanks, Ron. Yes, they scare me too. I think with the basting tape I mentioned above I might be able to place the closed zipper in the boot, avoiding wrinkles especially near the heel, then open the zipper to sew it in place. Edited February 1, 2024 by TomE Quote Share this post Link to post Share on other sites
NatesLeatherGds Report post Posted February 2, 2024 On 1/31/2024 at 4:39 PM, TomE said: First time installing a zipper. I welcome your tips and advice. You're very brave. Good work. Quote Share this post Link to post Share on other sites
