PaulP Report post Posted January 20, 2008 I would like to make some Biker Wallets. Where can we get the chain that looks like skulls n crosses n stuff that are specific for the biker wallets? Could we get the snaps for biker wallets at the same place? The snaps would have skulls, crosses and such on them. Thanks, Paul Quote Share this post Link to post Share on other sites
ta2 Report post Posted February 19, 2008 Try jpcycles.com, I've seen them in the catalog they send me. I also make wallet chains out of chain maille rings, any length, and I have about 5 different weaves of chains. The chain maille chains are a little expensive because of the labor. I hand cut all of my rings from coils, open and close the rings, then make them into chains. There are a couple of sites on the net that sell them also. Quote Share this post Link to post Share on other sites
esantoro Report post Posted February 19, 2008 Ohio Travel Bags has a good selection of this stuff Quote Share this post Link to post Share on other sites
stanly Report post Posted March 10, 2011 Ohio Travel Bags has a good selection of this stuff in a 300pg cat. search found Skull conchos and belt buckles ta2: Try jpcycles.com, I've seen them in the catalog they send me I see belts and buckles - some wouldn't be caught dead in. (I know, should have bought some 3yrs ago when this was current) Quote Share this post Link to post Share on other sites
Spinner Report post Posted March 11, 2011 I also make wallet chains out of chain maille rings, any length, and I have about 5 different weaves of chains. The chain maille chains are a little expensive because of the labor. I hand cut all of my rings from coils, open and close the rings, then make them into chains. There are a couple of sites on the net that sell them also. Yeah they can be but they look so much nicer. A buddy of mine is currently working on a 2ft +/- full Persian for me out of Stainless Steel for my new wallet I'm eventually going to make. Hopefully should be picking it up this weekend. Quote Share this post Link to post Share on other sites
CNHLeather Report post Posted May 20, 2014 can someone tell me the name of and where I can find the im guessing conchos with Chicago screws or chain secures that have o rings attached ive seen lion heads, skulls and regular posts the type used to secure chain to wallet Quote Share this post Link to post Share on other sites
TIMCO now SX Report post Posted May 21, 2014 Check out www.sxindustries.com We produce over 100 Special Snap caps that are used for Vest Extenders and belts. We are always adding to this line so if you what to see display boards , just email me. tim@sxindustries.com Have a Happy & Safe Memorial Day weekend everyone! Quote Share this post Link to post Share on other sites
CNHLeather Report post Posted June 20, 2014 im looking for something like this Check out www.sxindustries.com We produce over 100 Special Snap caps that are used for Vest Extenders and belts. We are always adding to this line so if you what to see display boards , just email me. tim@sxindustries.com Have a Happy & Safe Memorial Day weekend everyone! This one has lion head i have seen some with skulls Quote Share this post Link to post Share on other sites
camano ridge Report post Posted June 21, 2014 (edited) Believe it or not those are drawer pulls. You can get them at home depot, lowes etc. The hardware hut has amany different ones. The lion ones are different sizes and styles spread through ou the pages. http://www.thehardwarehut.com/type-ring_pull.php?psCat=424&search_type=310&ps=1&start_no=2 Edited June 21, 2014 by camano ridge Quote Share this post Link to post Share on other sites
CNHLeather Report post Posted June 21, 2014 These are smaller and sturdier than drawer pulls Quote Share this post Link to post Share on other sites
camano ridge Report post Posted June 21, 2014 Trust me I have made these and seen the ones you picture in person they are drawer pulls. they come in many sizes. Quote Share this post Link to post Share on other sites
CNHLeather Report post Posted June 21, 2014 for small dog collars but im interested in using for wallets to secure a maille chain to them im sorry ill have to check them out was told drawer pulls were made out of softer metals and wouldnt hold up Quote Share this post Link to post Share on other sites
camano ridge Report post Posted June 21, 2014 Here are some lion head conchos at with out the rings. At the bottom of the page is one you might be iterested in it is a skull concho with ring. http://www.aliexpress.com/cheap/cheap-screwback-conchos.html As to strong enough remember that ddrawer pulls are designed to be used to pull open drawers loaded with who knows what day after day. Quote Share this post Link to post Share on other sites
LTC Report post Posted June 21, 2014 If y'all are looking for really nice chainmaille wallet chains, check out these...i bought a couple from him and they're really nice. especially the titanium ones. http://www.cpfmarketplace.com/mp/showthread.php?236011-NEW-BRACELET-ADDED!!!-Titanium-and-Stainless-Chainmaille-bracelets-Grade-5-(6Al-4V) Quote Share this post Link to post Share on other sites
CNHLeather Report post Posted June 21, 2014 yeah all im getting on net are way to big i need something about the size of a dime or penny at most Quote Share this post Link to post Share on other sites
CNHLeather Report post Posted June 21, 2014 yeah the skull is nice and about what im looking for the price is steep though but ill keep looking thanks Quote Share this post Link to post Share on other sites
camano ridge Report post Posted June 21, 2014 Here is a lion head and tiger head wallet chain connector http://www.primalbrass.com/category/malbrass-comcategoryhttpwww-primalbrass-comcategorymens-wallet-snaps-wallet-chain-connectors/ Quote Share this post Link to post Share on other sites
CNHLeather Report post Posted June 21, 2014 OMG DUDE thanks so much thats exactly what im looking for Quote Share this post Link to post Share on other sites
camano ridge Report post Posted June 21, 2014 here is another one you might like https://svpply.com/item/3611419/Evil_Skull_Biker_Wallet_Chain_Connector Quote Share this post Link to post Share on other sites
LeatherLegion Report post Posted July 13, 2014 (edited) Both dog collars are a bit over 2.5in wide...that will give you an idea how big the O rings in the center are...they are not suitable for wallets as they are way too big and too heavy for that particular application . Edited July 13, 2014 by LeatherLegion Quote Share this post Link to post Share on other sites
CNHLeather Report post Posted July 15, 2014 Thanks Leather Legion what would you suggest and by the way love your work Quote Share this post Link to post Share on other sites
LeatherLegion Report post Posted July 15, 2014 OTB has a very small version ...probably too small and flimsy though ...you should heck them out anyway. I might be able to get my hands on some nice ones...brass and SS...simple but sturdy enough. If so, I will make sure to let you know. Quote Share this post Link to post Share on other sites
