Members Red Cent Posted July 2, 2014 Members Report Posted July 2, 2014 120? Holy....... Quote https://www.facebook.com/redcentcustomleather?ref=bookmarks http://www.redcentcustomleather.com/
Members Ken G Posted July 3, 2014 Members Report Posted July 3, 2014 Mine are haphazardly thrown into a couple of plastic storage boxes or scattered around the house. I have been looking for a used blueprint file cabinet to try to organize them a little better. The cabinets are 3 or 4 feet wide and usually contain 5 flat drawers about 2" tall. The sections are stackable. Problem is that so far all of the used ones I have found have been out of my price range. The affordable ones are either sold first or too far away. Quote
Members chiefjason Posted July 3, 2014 Members Report Posted July 3, 2014 Small metal rack and either dollar store plastic bins or old boxes cut down. I keep like guns together, i.e. G17, G19, and G26. Also keep any laser molds or accessories in there. Used to keep the sight channel posts in there too. Since I do kydex I keep my extra kydex molds with them. If I pre make any holsters they go there too. I've ended up with so many that I've run out of space and moved my less popular models into a large drawer. Quote
Members Dwight Posted July 3, 2014 Members Report Posted July 3, 2014 In a clear tub, . . . under my desk, . . . the only "organizational" part of my process, . . . it ALWAYS goes back in the tub as soon as the molding is done. Not a perfect system , . . . but it works for me. May God bless, Dwight Quote If you can breathe, . . . thank God. If you can read, . . . thank a teacher. If you are reading this in English, . . . thank a veteran. www.dwightsgunleather.com
Frankqv Posted October 14, 2014 Report Posted October 14, 2014 (edited) I Made two of these for Moldgun storage.Each one has two layers,Each layer holds 14-18 molds Edited October 14, 2014 by Frankqv Quote
Members camano ridge Posted October 14, 2014 Author Members Report Posted October 14, 2014 Frankqv, I like it. Quote https://www.facebook.com/CamanoRidgeCustomLeather?fref=ts
Members Blackey Cole Posted October 15, 2014 Members Report Posted October 15, 2014 I only have a few a must pull double duty. They are used to protect the one or two holsters that I don't use tennis balls in like the 1911 goes in my wild bunch holster, I just throw the SAA in a calvary rig. My XD is thrown in my tool bag. Mt Taurus 24/7 is also thrown in a bag with the tools. But if I had many like some of you I hear complaining about having so many that you have to dig for the correct one I got a solution. Make several frames of peg board hinge them so they can lay flat against the wall. Then you open it and can flip thru it like a book. The organize you blue guns on it. Then outline the gun and Lables what goes there. That way you have room for more blue guns every blue gun has a spot on the board. You can have one side glock the next could be /S&W revolvers then facing that the s&w autos, etc Quote
Frankqv Posted October 16, 2014 Report Posted October 16, 2014 Frankqv, I like it. Simple to do Just cut slots in 1x6 Pt with 12" cutoff saw,1.5 " apart. Dividers are scrap PVC siding. 6" tall( inside) as wide as you want. On the ends I cut slots 3/4 in apart to accommodate big guns,45's,Blackhawks ect Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.