Jump to content

Recommended Posts

  • Members
Posted

Here you go Don. It's actually from a set of patterns I downloaded from Leathercraft Library several years ago. I do plan on increasing the stitch length on my machine from now on. attachicon.gifHolster Back.JPGThanks! JW

The stitching is a bit off....check your stitches per foot....make it lesser, your top tension is off...your bottom shows knots like the top is to loose....stitch all in one contineous line...leave no gaps open when you connect, a light holster like that can handle a thread size lighter...207 ??!!

Other than that, looks good and clean style....keep learning on ur Machine, it is a heart break after designing and cutting and gluing....to ruin your work on a sewing machine...guess how I know this....haha...

http://www.elfwood.com/~alien883

First it is just leather....then it is what-ever I can dream off...

  • Replies 21
  • Created
  • Last Reply

Top Posters In This Topic

  • Members
Posted

The stitching is a bit off....check your stitches per foot....make it lesser, your top tension is off...your bottom shows knots like the top is to loose....stitch all in one continuous I have line...leave no gaps open when you connect, a light holster like that can handle a thread size lighter...207 ??!!

Other than that, looks good and clean style....keep learning on ur Machine, it is a heart break after designing and cutting and gluing....to ruin your work on a sewing machine...guess how I know this....haha...

Thanks Jimbob! I have reset to 5-6 SPI and I also feel it looks better IMHO. I'm playing with the tension settings (slowly) to see if I can get the knots balanced better. I expected to have a small learning curve so I've been using some cheap leather I bought from Tandy on sale. I consider it the "sacrificial side" to learn with and it was relatively cheap ($69.99) so I have plenty to play with w/o feeling guilty. Thanks for the feedback! (BTW nice website and cool shop!)

JW

JW

My sewing machines (until I buy another one):

Cowboy CB3200

Cowboy CB0797

  • Members
Posted

Tension thingy is all about experience, you will learn that pretty fast and it is so easy to adjust....stay away from the bottom tension screw for now....make sure your thread is threaded right with no loops or snags....have it floating freely to your tension wheel and beyond....you will find out very soon that eventually the thickness of the leather will make your knots move in or out.....always keep the right needle in your machine and also the one that makes a stitch you like...( many different styles of needle heads ) speer, dagger, point and many more....

Keep your needle sharp or change when dull...dont use pre-waxed thread ...use bonded Nylon or Prop.

Always use a number smaller on the bottom....helps to tighten the loops ( knots ) When I start a importand project, I use the exact same leather as scrap and run a few inches to see if the stitches look good.....

Thanks for the praise on my website and shop....my mancave....haha...NO GIRLS allowed !!

Have fun

James

http://www.elfwood.com/~alien883

First it is just leather....then it is what-ever I can dream off...

  • Members
Posted

LOL Jimbob, guess I'm not allowed. I have a cobra 4 and there is a learning curve and one of them is spi. I just did a CC holder and spi was way too long, set at where it came from the factory. So I shortened it. I think your stitching looks nice. Yes tensions, the bobbin screw, etc is hard at first. Like Jimbob I run some stitches first to make sure my machine is cranky, LOL. Good luck with your Cowboy. Cheryl

  • 3 years later...
  • Members
Posted
On 7/7/2014 at 4:26 PM, Colt W Knight said:

Everything looks straight and even.

The CB3200 is on my list. I have started squirreling my leather money to buy one. I hate hand sewing guitar straps and portfolios.

Colt did you end up getting the 3200?  If so, where did you get yours and hows the performance been?

  • Members
Posted

I ended up getting a 4500 from Bob Kovar at Toledo sewing. Performance is amazing. These machines have a lot of capabilities. 

Posted
17 hours ago, Colt W Knight said:

I ended up getting a 4500 from Bob Kovar at Toledo sewing. Performance is amazing. These machines have a lot of capabilities. 

Bob called today, 4500 has shipped!! WooHoo! It's like being 6 years old waiting for Christmas. Except instead of hot chocolate, I get Jack Daniels to blunt the anticipation. :rolleyes:

So much leather...so little time.

 

Posted
49 minutes ago, alpha2 said:

Bob called today, 4500 has shipped!! WooHoo! It's like being 6 years old waiting for Christmas. Except instead of hot chocolate, I get Jack Daniels to blunt the anticipation. :rolleyes:

I am excited for you - setting up and playing with a new tool, machine, reloaded, etc., is one of my favorite things to do!  Hope you have plenty of scrap leather on hand to practice with.  It took me awhile to become comfortable sewing on my 4500, and I am still amazed when I see it effortlessly punching through any type of leather I feed through it!  I rarely have to adjust tensions - but that may be because I am usually sewing leather that is the same thickness, even when I change needle and thread size.

Have fun and let us know what you think after you have a chance to play with your new machine!

Gary

Cowboy 4500, Consew 206RB-4

Posted

Oh, I'm all about scrap leather! I'll be in touch!

 

So much leather...so little time.

 

Posted
2 minutes ago, alpha2 said:

Oh, I'm all about scrap leather! I'll be in touch!

 

Also, I hope you bought extra bobbins.  It’s nice to have a separate bobbin for each thread size and color so you can quickly change thread sizes.  I think I received 4 with my machine and I quickly ordered enough extra to always have a bobbin full of every size/color of thread that I use!

Gary

Cowboy 4500, Consew 206RB-4

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...