Biker Wallet Pattern Uploaded

[Hi Im Joe]

Awesome pattern thanks for sharing.

[Camerius]

Thank you very much for this patter, tboyce.

[plowboy73]

Thanks for sharing!

[RavenAus]

Thanks for the pattern Look forward to trying it out.

[VanDutch]

Thanks mate, much appreciated

[NVLeatherWorx]

Very nice pattern and thank you for uploading it for others to consider. However, just a heads up to everyone who tries it, you may find that the card pockets are very small and tight. In fact, they will be too tight to put two cards into them side by side. I printed off at the 100% setting that it should have been and once I cut a set of test templates out (I always print off multiple sets of my patterns and use one to create a paper mock-up of the finished product) and found that the spacing between the center stitch line and the outer edges was exactly the SAME dimension as the width of a standard credit card. I took the cut outs and enlarged them to 110% which made them much more receptive for a card. I ended up making a second set at 115% which made them large enough for a user to insert more than one card per slot (and we all know that everyone we make wallets and clutch purses for always cram them full of cards and junk anyway so I did it just so I don't here "could you make the pockets a little bigger in the future?").

Still, a very solid design and it brings a style that far exceeds what others have.

Thanks again for the upload and may everyone have some success with it.

[tboyce58]

Thanks for the feedback!I will change the pattern and reupload today!

[tboyce]

Thanks to NV Leatherworx for pointing out a flaw in my design. I fixed it and made the card slots 1/4" wider each which had the affect of lengthening the walled by 1/2". I uploaded the revised pattern here

biker wallet-revised.pdf

Edited October 6, 2014 by tboyce

[jstar61]

Very nice. Thank you.

[msdeluca]

Thanks for taking the time to do this...