Northmount Posted January 9, 2016 Report Posted January 9, 2016 The adjustment for the middle foot is the one you were pointing to in your photo. It is vertically above middle presser foot shaft. Maybe it has the wrong spring. Could cut part of it off. Seems to me there was another thread here somewhere about different lengths of springs. You could check with Gregg from Keystone. Tom Quote
Members MG513 Posted January 18, 2016 Members Report Posted January 18, 2016 The adjustment for the middle foot is the one you were pointing to in your photo. It is vertically above middle presser foot shaft. Maybe it has the wrong spring. Could cut part of it off. Seems to me there was another thread here somewhere about different lengths of springs. You could check with Gregg from Keystone. Tom Thx for trying to help me! I made a separate post about it as I still haven't gotten an answer. Quote
Members Gregg From Keystone Sewing Posted January 18, 2016 Members Report Posted January 18, 2016 I forgot about this one, if you can find it. I don't have and called a few suppliers, so stock may be limited. This is direct bolt on, no mods needed to make this presser foot work. Quote Industrial sewing and cutting, parts sales and service, family owned since 1977, Philadelphia, Pennsylvania USA, 215/922.6900 info@keysew.com www.keysew.com
Members MG513 Posted January 19, 2016 Members Report Posted January 19, 2016 I forgot about this one, if you can find it. I don't have and called a few suppliers, so stock may be limited. This is direct bolt on, no mods needed to make this presser foot work. Ok thanks!! IS that a universal part number? Meaning if they recognize the number than I've found the right thing? Also Tom suggested something with the spring? If I can't find this foot should doing something to the spring be the next step? Thank you!! Quote
Uwe Posted March 26, 2016 Report Posted March 26, 2016 (edited) Old posts seems have lost some images after the recent upgrade, so I'm not sure if this was covered already. In any case, I came across a needle feed conversion foot on ebay today and thought I'd share it. Apologies if it's a duplicate of a previous post. Edited March 26, 2016 by Uwe Quote Uwe (pronounced "OOH-vuh" ) Links: Videos
Members MG513 Posted March 26, 2016 Members Report Posted March 26, 2016 14 hours ago, Uwe said: Old posts seems have lost some images after the recent upgrade, so I'm not sure if this was covered already. In any case, I came across a needle feed conversion foot on ebay today and thought I'd share it. Apologies if it's a duplicate of a previous post. Thanks so much!!! Unfortunately somebody bought the last one!! Just my luck! Its unbelievable how difficult this foot is to find. You find it and it's gone that quick. Smh. Well. I have taken the advice on how to relieve the pressure and I think it did get much better. I just think I need to stay away from veg tan leathers until this part pops up again, or until I get more comfortable with my machine to try other things. I just finished my first project a few weeks ago but I've been so busy I haven't posted it yet! Thanks for all your help as you've answered so many of my questions!!! Quote
Members shoepatcher Posted March 29, 2016 Members Report Posted March 29, 2016 See if you can get us a part # and then we can check with other suppliers! glenn Quote
CowboyBob Posted March 29, 2016 Report Posted March 29, 2016 The # is 240030 Quote Bob Kovar Toledo Industrial Sewing Machine Sales Ltd. 3631 Marine Rd Toledo,Ohio 43609 1-866-362-7397
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.