Singer Leather Sewing Machines

[CowboyBob]

NO,it won't work,the gears for the 29K51 are real fine teeth & haven't been available for over 40 yrs.

[Constabulary]

2nd what Bob said - they will never ever fit! The K50´s sub class gearbox has a total different design.

 

 

Edited May 13, 2017 by Constabulary

[JessH]

On 01/09/2016 at 9:43 PM, Singermania said:

The Singer list is good and most people know about it, but most of the machine manuals people are looking for are not on that list, that is why they are writing and enquiring.  If you need manuals then I sent out what I have free of charge via email.... I have the 132K6 series, 133K8 series, 45k flatbed and cylinder arm, Adler 20 series, Champion, Pearons no 6 and A1 and so on.

Don't be afraid to ask, I send out on average about 5 manuals per week.

I would very much like the 132K6 series service/instruction manual, I did find the parts list? I'm also hoping to locate 331k5 instruction and parts manuals, as I've bought that machine already, and currently waiting for it to arrive, but it has no manuals with it, and haven't found them on any of the sites/links listed above, so if anyone has one or access to one for photocopies or pdf attachment I'd be eternally grateful?

[Singermania]

if you let me have your email address I'll send you the K6 operators manual, the service manual is a lot bigger and not on my disk... the 331k manual is not in my library, however I'm sure someone else will have it...

 

[Constabulary]

maybe these files will help you:

Singer 132K Manual.pdf

Singer 132K 132B26.pdf

[Cbm]

111w155 presser bar

 

[ron50]

Hi I'm new to the forum. I'm in a small town on the east coast of Australia. I repair sewing machines for a living. I have just had a 31k48 come in for a service. We used to see a lot of them in the sixties They were a popular machine for light shoe making. Because they had a circular feed dog it never dropped below the plate and the circular feed was moved by dogs. The advantage of the no drop feed was control , the dis advantage was no reverse. I need a feed dog for the one i am working on. The operator did not notice the roller foot was seized and it has ground half the teeth off the circular feed. The feeders came in different configurations , wide and narrow and coarse and fine teeth. All the ones I have seen were made from cast iron. So far I have not been able to source replacement parts for the machine. I will have to strip it and try to find part numbers for the feed ,plate and bobbin case. Cheers Ron. 

[Hifeabs]

Hi, please I need any good leather sewing machine, if there is someone who want to sell, I want to buy. Thanks,  HIFEABS 

[Wizcrafts]

On 2/11/2018 at 6:05 PM, Hifeabs said:

Hi, please I need any good leather sewing machine, if there is someone who want to sell, I want to buy. Thanks,  HIFEABS 

This section of the LW.N forum is for discussing leather sewing machine capabilities and their suitability for particular types of projects. Please visit our Market Place section of the forum where  there is a sub-section for buying and selling new/rebuilt and old sewing machines. Most posted on Leatherworker.net are leather sewing machines with various capabilities.

[Angebe]

On 02/09/2016 at 6:43 AM, Singermania said:

The Singer list is good and most people know about it, but most of the machine manuals people are looking for are not on that list, that is why they are writing and enquiring.  If you need manuals then I sent out what I have free of charge via email.... I have the 132K6 series, 133K8 series, 45k flatbed and cylinder arm, Adler 20 series, Champion, Pearons no 6 and A1 and so on.

Don't be afraid to ask, I send out on average about 5 manuals per week.

Hi Singermania

ive noticed you have a library of manuals, do you happen to have one for a Toyota AD320

Ls2-ad320-202 compound foot 

thks