Jump to content

Recommended Posts

Posted

NO,it won't work,the gears for the 29K51 are real fine teeth & haven't been available for over 40 yrs.

Bob Kovar
Toledo Industrial Sewing Machine Sales Ltd.
3631 Marine Rd
Toledo,Ohio 43609
1-866-362-7397

toledo-banner-2.jpg

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

  • Members
Posted (edited)

2nd what Bob said - they will never ever fit! The K50´s sub class gearbox has a total different design.

 

 

29K5x Gear Box.jpg

Edited by Constabulary

~ Keep "OLD CAST IRON" alive - it´s worth it ~

Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2

  • 4 months later...
  • Members
Posted
On 01/09/2016 at 9:43 PM, Singermania said:

The Singer list is good and most people know about it, but most of the machine manuals people are looking for are not on that list, that is why they are writing and enquiring.  If you need manuals then I sent out what I have free of charge via email.... I have the 132K6 series, 133K8 series, 45k flatbed and cylinder arm, Adler 20 series, Champion, Pearons no 6 and A1 and so on.

Don't be afraid to ask, I send out on average about 5 manuals per week.

I would very much like the 132K6 series service/instruction manual, I did find the parts list? I'm also hoping to locate 331k5 instruction and parts manuals, as I've bought that machine already, and currently waiting for it to arrive, but it has no manuals with it, and haven't found them on any of the sites/links listed above, so if anyone has one or access to one for photocopies or pdf attachment I'd be eternally grateful?

  • Members
Posted

if you let me have your email address I'll send you the K6 operators manual, the service manual is a lot bigger and not on my disk... the 331k manual is not in my library, however I'm sure someone else will have it...

 

  • 1 month later...
  • Members
Posted

111w155 presser bar

 

  • 3 weeks later...
  • Members
Posted

Hi I'm new to the forum. I'm in a small town on the east coast of Australia. I repair sewing machines for a living. I have just had a 31k48 come in for a service. We used to see a lot of them in the sixties They were a popular machine for light shoe making. Because they had a circular feed dog it never dropped below the plate and the circular feed was moved by dogs. The advantage of the no drop feed was control , the dis advantage was no reverse. I need a feed dog for the one i am working on. The operator did not notice the roller foot was seized and it has ground half the teeth off the circular feed. The feeders came in different configurations , wide and narrow and coarse and fine teeth. All the ones I have seen were made from cast iron. So far I have not been able to source replacement parts for the machine. I will have to strip it and try to find part numbers for the feed ,plate and bobbin case. Cheers Ron. 

  • 2 months later...
  • Members
Posted

Hi, please I need any good leather sewing machine, if there is someone who want to sell, I want to buy. Thanks,  HIFEABS 

  • Moderator
Posted
On 2/11/2018 at 6:05 PM, Hifeabs said:

Hi, please I need any good leather sewing machine, if there is someone who want to sell, I want to buy. Thanks,  HIFEABS 

This section of the LW.N forum is for discussing leather sewing machine capabilities and their suitability for particular types of projects. Please visit our Market Place section of the forum where  there is a sub-section for buying and selling new/rebuilt and old sewing machines. Most posted on Leatherworker.net are leather sewing machines with various capabilities.

Posted IMHO, by Wiz

My current crop of sewing machines:

Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.

  • 2 weeks later...
  • Members
Posted
On 02/09/2016 at 6:43 AM, Singermania said:

The Singer list is good and most people know about it, but most of the machine manuals people are looking for are not on that list, that is why they are writing and enquiring.  If you need manuals then I sent out what I have free of charge via email.... I have the 132K6 series, 133K8 series, 45k flatbed and cylinder arm, Adler 20 series, Champion, Pearons no 6 and A1 and so on.

Don't be afraid to ask, I send out on average about 5 manuals per week.

Hi Singermania

ive noticed you have a library of manuals, do you happen to have one for a Toyota AD320

Ls2-ad320-202 compound foot 

thks

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...