Stetson912 Report post Posted January 28, 2018 It's cool seeing what people classify as wallets. All the different designs n such. Quote Share this post Link to post Share on other sites
YinTx Report post Posted January 28, 2018 (edited) 7 hours ago, Mattsbagger said: Hey Yin, can we see the inside? Do you put heavier leather under the 3 oz when stamping? I put a layer of 1 oz on the back of the tooled section after I was done dyeing, antiquing, etc. It still has come out a lot thicker than I wanted, so a bit much to carry around in the front pocket for my tastes. "T" pocket design might help here for the future, but wanted to try one with a full pocket design. Here is the inside: YinTx Edited January 28, 2018 by YinTx duplicated entry Quote Share this post Link to post Share on other sites
bikermutt07 Report post Posted January 29, 2018 12 hours ago, Mattsbagger said: Here are a couple long wallets I've done recently. That blue looks suspiciously familiar. Quote Share this post Link to post Share on other sites
Mattsbagger Report post Posted January 29, 2018 9 minutes ago, bikermutt07 said: That blue looks suspiciously familiar. It's W/C 3oz airbrushed with Fiebings Blue Pro Dye. Quote Share this post Link to post Share on other sites
bikermutt07 Report post Posted January 29, 2018 1 hour ago, Mattsbagger said: It's W/C 3oz airbrushed with Fiebings Blue Pro Dye. Oh, it looks just like the ocean blue I got from NStarleather. My mistake. Quote Share this post Link to post Share on other sites
Mattsbagger Report post Posted January 29, 2018 I would love the buy the leather he sells. I can't afford to so I buy W/C and dye the colors I need.lol Quote Share this post Link to post Share on other sites
Ecru Report post Posted January 29, 2018 I am more into minimalist wallets. This is the new one i made for myself a few days back. Quote Share this post Link to post Share on other sites
Wedgetail Report post Posted January 30, 2018 Kangaroo inner, cowhide outer. Quote Share this post Link to post Share on other sites
thefanninator Report post Posted January 30, 2018 I'm carrying this right now. Marine French goat with navy alligator pockets. It's fully lined with goat split to .5mm. Fenice painted edges and I restitched it with Yellow Lin Cable. Quote Share this post Link to post Share on other sites
Bolanca Report post Posted January 30, 2018 This is my bestseller,MMW medium minimalist wallet. Quote Share this post Link to post Share on other sites
Dun Report post Posted January 30, 2018 Well...we'll see how this turns out It's inspired by rare&sundry's bifold style Quote Share this post Link to post Share on other sites
Deryk Report post Posted January 30, 2018 I have only made maybe 6 wallets in my life...made 2 this weekend. The green one needs the new right sized snaps i ordered yesterday re set and burnished. Quote Share this post Link to post Share on other sites
Halitech Report post Posted January 30, 2018 17 minutes ago, Deryk said: I have only made maybe 6 wallets in my life...made 2 this weekend. The green one needs the new right sized snaps i ordered yesterday re set and burnished. The long wallet looks good but one thing I noticed is the middle section of pockets needs to be trimmed a little to make the edges even. The second pocket from the top is really sticking out. I would then burnish the edges as well. Quote Share this post Link to post Share on other sites
Mattsbagger Report post Posted January 30, 2018 24 minutes ago, Halitech said: The long wallet looks good but one thing I noticed is the middle section of pockets needs to be trimmed a little to make the edges even. The second pocket from the top is really sticking out. I would then burnish the edges as well. I have that pattern also. I leave the tabs long when I cut them out. Then after I attach to the center section I can get them cut nice and flush so you can get a good edge and burnish. 44 minutes ago, Deryk said: I have only made maybe 6 wallets in my life...made 2 this weekend. The green one needs the new right sized snaps i ordered yesterday re set and burnished. Quote Share this post Link to post Share on other sites
datdraku Report post Posted January 30, 2018 Here's mine Quote Share this post Link to post Share on other sites
Petewon Report post Posted January 31, 2018 (edited) Here's a couple of mine from a while back. I've not had the chance to do anything for a good while now and hoping to get back into it soon. Edited January 31, 2018 by Petewon Quote Share this post Link to post Share on other sites
Joseph1836 Report post Posted January 31, 2018 4 hours ago, Petewon said: Here's a couple of mine from a while back. I've not had the chance to do anything for a good while now and hoping to get back into it soon. What kind of edge creaser on the purple one? And we're did you get it ? How do you make that snap ? I am so new to this Quote Share this post Link to post Share on other sites
Petewon Report post Posted January 31, 2018 35 minutes ago, Joseph1836 said: What kind of edge creaser on the purple one? And we're did you get it ? How do you make that snap ? I am so new to this Hi, the edge creaser I used is the Wuta one shown in the first image. Its 1.5mm which i find works for most of my stuff. The snap is just a really thin skived piece of leather glued around a brass snap. Quite tricky that one. Quote Share this post Link to post Share on other sites
Stetson912 Report post Posted January 31, 2018 @Petewon very nice work. I'd like to see your construction methods on those. Watch straps are beyond me at the moment haha. Also, when setting that snap with the leather covering, does the setter damage the leather? Or do you put something over it to protect it? Quote Share this post Link to post Share on other sites
Brown64 Report post Posted February 2, 2018 One of the last wallets I did. Quote Share this post Link to post Share on other sites
Petewon Report post Posted February 2, 2018 On 31/01/2018 at 7:28 PM, Stetson912 said: @Petewon very nice work. I'd like to see your construction methods on those. Watch straps are beyond me at the moment haha. Also, when setting that snap with the leather covering, does the setter damage the leather? Or do you put something over it to protect it? Thanks I've been through a few different processes with watch straps and finally settled on one I'm happy with..... for now :). I used to construct the back, padding and front of the strap before cutting the shape. I find it much easier to cut the shape for the bottom, then add the padding and top and use the shape of the pre cut bottom as a guide to cut around. Very tricky to explain. And yes, for the snaps I use a thick bit of leather over the setter so it doesn't damage the leather covered snap. Quote Share this post Link to post Share on other sites
Mattsbagger Report post Posted February 2, 2018 18 minutes ago, Petewon said: Thanks I've been through a few different processes with watch straps and finally settled on one I'm happy with..... for now :). I used to construct the back, padding and front of the strap before cutting the shape. I find it much easier to cut the shape for the bottom, then add the padding and top and use the shape of the pre cut bottom as a guide to cut around. Very tricky to explain. And yes, for the snaps I use a thick bit of leather over the setter so it doesn't damage the leather covered snap. You can do the same with the "fancy" or shotgun shell snaps too. Quote Share this post Link to post Share on other sites
alienman32 Report post Posted February 2, 2018 here's my version of the sketch wallet. i saw the sketch wallet on Instagram and decided to make myself one. It's a hassle to carry a full sized sketchbook everywhere so i made this one to for quick doodles or notes when I'm out and about. Quote Share this post Link to post Share on other sites
OLDNSLOW Report post Posted February 2, 2018 Petewon, I am interested in knowing what type of cutting tool that is, thanks Quote Share this post Link to post Share on other sites
YinTx Report post Posted February 2, 2018 12 hours ago, Brown64 said: One of the last wallets I did. Interesting detail work on the banjo and case. Is it tooled and antiqued only, or did you use dye or paint to bring out the details? YinTx Quote Share this post Link to post Share on other sites
