Members JerseyFirefighter Posted July 31, 2018 Members Report Posted July 31, 2018 Special purpose built tool or something seemingly commercially available? I think this setup and execution looks fantastic! Quote
Members JD62 Posted July 31, 2018 Members Report Posted July 31, 2018 Yup that's a winner for sure!! Quote
Contributing Member JLSleather Posted July 31, 2018 Contributing Member Report Posted July 31, 2018 Piece of angle iron with a cam lock on teh end? That big table looks downright handy, though. Quote
Members YinTx Posted July 31, 2018 Members Report Posted July 31, 2018 I was just wondering why they were cutting a perfectly good piece of leather in half like that. YinTx Quote
Contributing Member fredk Posted July 31, 2018 Contributing Member Report Posted July 31, 2018 (edited) I would suggest they are cutting it to get the sizes people want to buy A shoulder needs cut in two if you want to buy a half-shoulder, a whole hide needs cut in two if someone wants a side Edited July 31, 2018 by fredk Quote
Contributing Member JLSleather Posted July 31, 2018 Contributing Member Report Posted July 31, 2018 (edited) 8 hours ago, fredk said: a whole hide needs cut in two if someone wants a side And the shoulder comes off if you want a 'bend" Question is, why that narrow kid bouncin' every one of em off the table? Tenderizer? Edited July 31, 2018 by JLSleather Quote
Members TonySFLDLTHR Posted July 31, 2018 Members Report Posted July 31, 2018 (edited) 9 hours ago, fredk said: I would suggest they are cutting it to get the sizes people want to buy A shoulder needs cut in two if you want to buy a half-shoulder, a whole hide needs cut in two if someone wants a side 58 minutes ago, JLSleather said: And the shoulder comes off if you want a 'bend" Question is, why that narrow kid bouncin' every one of em off the table? Tenderizer? As a matter of fact we are cutting them in to more of a piece that people like to buy. As the caption on the video suggests, we are cutting into Bends for $99 each (Wholesale). I was taking pictures of this yesterday for the website and I can tell you this stuff is really smooth! The video is just repeating, but I can see he needs to be a little more careful after making the cut and stacking them back up. I will pass the word on. Edited July 31, 2018 by TonySFLDLTHR Quote
Contributing Member JLSleather Posted July 31, 2018 Contributing Member Report Posted July 31, 2018 Yeah, I was jus' ribbin' the boy Leather looks pretty clean from here, and the back looks pretty well trimmed. Quote
Members TonySFLDLTHR Posted July 31, 2018 Members Report Posted July 31, 2018 I like to give him a little crap every now and then. So it all works out. The backs are super velvety...I have some at my desk so I can rub it to calm down. This the link for them. If you need it split we will do that for free on call in orders this week as well. Quote
Members OLDNSLOW Posted July 31, 2018 Members Report Posted July 31, 2018 That is more than some angle iron that cutter is really slick! Quote
Contributing Member JLSleather Posted August 1, 2018 Contributing Member Report Posted August 1, 2018 Razor blade and a couple roller bearings ... Quote
Members koreric75 Posted August 2, 2018 Members Report Posted August 2, 2018 so glad my vacation through missouri was the first of last month! I wouldn't have made it past springfield and would've had to turn around and go home...lol Quote
Members ScoobyNewbie Posted September 13, 2018 Members Report Posted September 13, 2018 Fun toy! And I thought the strap cutter was magical... Quote
RockyAussie Posted September 14, 2018 Report Posted September 14, 2018 On 01/08/2018 at 1:03 AM, TonySFLDLTHR said: I like to give him a little crap every now and then. So it all works out. The backs are super velvety...I have some at my desk so I can rub it to calm down. This the link for them. If you need it split we will do that for free on call in orders this week as well. @TonySFLDLTHR WOW I love the cutting action on that device. Can I ask are the blades easy to sharpen or replace. Are they small special circular blades or like a Stanley or razor blade set up? Will it be possible to buy just the cutting device with out the other frame work. Being in Oz would be a killer on the frame shipping cost. Quote
Members Wedgetail Posted September 17, 2018 Members Report Posted September 17, 2018 On 14/09/2018 at 1:37 PM, RockyAussie said: @TonySFLDLTHR WOW I love the cutting action on that device. Can I ask are the blades easy to sharpen or replace. Are they small special circular blades or like a Stanley or razor blade set up? Will it be possible to buy just the cutting device with out the other frame work. Being in Oz would be a killer on the frame shipping cost. Imagine that would make life easier to get your straight edge before cutting your belt straps, Brian! Quote
RockyAussie Posted September 17, 2018 Report Posted September 17, 2018 1 hour ago, Wedgetail said: Imagine that would make life easier to get your straight edge before cutting your belt straps, Brian! Yes it would be magic in comparison as long as the blade sharpening does not need special equipment or the blades are cheap enough to replace. I just love good ideas like that but I guess in reality it would only save me 2 or 3 hours a month. Not really worth designing my own for that. Quote
Members TonySFLDLTHR Posted September 17, 2018 Members Report Posted September 17, 2018 On 9/13/2018 at 10:37 PM, RockyAussie said: @TonySFLDLTHR WOW I love the cutting action on that device. Can I ask are the blades easy to sharpen or replace. Are they small special circular blades or like a Stanley or razor blade set up? Will it be possible to buy just the cutting device with out the other frame work. Being in Oz would be a killer on the frame shipping cost. It is a razor blade, so changing it out is very simple. Once we figure out if we can get them produced accurately and affordably, then I will have more information to share. However, I can't help but think we will sell it as full set up, just cutter, and just frame. Quote
RockyAussie Posted September 17, 2018 Report Posted September 17, 2018 8 hours ago, TonySFLDLTHR said: It is a razor blade, so changing it out is very simple. Once we figure out if we can get them produced accurately and affordably, then I will have more information to share. However, I can't help but think we will sell it as full set up, just cutter, and just frame. Thanks for the answer Tony. Its a shame to have to get the whole contraption for some with low table space room and like myself 1/2 a world away in distance. The cutting device alone I am sure would be a big seller without the need to have a lot of storage room your selves I think. Either way I hope to see you get it going sometime soon. Quote
Members TonySFLDLTHR Posted September 18, 2018 Members Report Posted September 18, 2018 14 hours ago, RockyAussie said: Thanks for the answer Tony. Its a shame to have to get the whole contraption for some with low table space room and like myself 1/2 a world away in distance. The cutting device alone I am sure would be a big seller without the need to have a lot of storage room your selves I think. Either way I hope to see you get it going sometime soon. Sorry, I might not have been clear. I can see buying options as: 1. Full Setup (Cutting Device plus Clamp {if we even will offer the clamp}) 2. Cutting Device 3. Clamp (if we even offer this) Quote
RockyAussie Posted September 18, 2018 Report Posted September 18, 2018 9 hours ago, TonySFLDLTHR said: Sorry, I might not have been clear. I can see buying options as: 1. Full Setup (Cutting Device plus Clamp {if we even will offer the clamp}) 2. Cutting Device 3. Clamp (if we even offer this) OK now I am hooked. Please give me a thought when the cutting device is a goer and let me know. Do you work with any agents/suppliers in Australia? Quote
Rockoboy Posted September 22, 2018 Report Posted September 22, 2018 On 18/09/2018 at 9:20 PM, TonySFLDLTHR said: (if we even offer this) On 19/09/2018 at 6:31 AM, RockyAussie said: Do you work with any agents/suppliers in Australia? +1. I can see a need for one of these. Quote
Contributing Member JLSleather Posted September 22, 2018 Contributing Member Report Posted September 22, 2018 On 7/30/2018 at 9:35 PM, JLSleather said: Piece of angle iron with a cam lock on teh end? That big table looks downright handy, though. On 8/1/2018 at 10:21 AM, JLSleather said: Razor blade and a couple roller bearings ... On 9/17/2018 at 8:57 AM, TonySFLDLTHR said: It is a razor blade, so changing it out is very simple. Once we figure out if we can get them produced accurately and affordably, ... Uhhh... that what I dun sayd. Quote
Members billybopp Posted September 22, 2018 Members Report Posted September 22, 2018 I use a Logan 560-1 picture framing mat cutter to cut leather with - similar to what you Springfield is using, but just a bit smaller. We do a some custom picture framing, so had it anyway, and I decided one day to try it on leather and it worked great with a couple of limitations - mostly the throat depth behind the rail limits how deep into the leather I can cut, it's about 7 or 8 inches for pieces larger than about 50" or so (they fit between the hinges), and the straight edge is 60" long, so big enough to do most of what I need to do. Blades are inexpensive and pretty darn good out of the box, but I do strop them a bit. They also have the Adapt-a-rule system that is not board mounted($65 on Amazon), so you can clamp the straight edge to your work surface and run a cutter along it ($21 on Amazon). The longest they offer is 60", so reasonably large and without the throat depth limitation of the board mounted cutter that I use. I also use a Fiskars rotary paper trimmer($48 on Amazon) for thinner leather up to about 12" wide. - Bill Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.