Jump to content

Recommended Posts

  • Replies 20
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • Members
Posted

One minor point, Renia Aquilim 315 is neoprene based rather than latex. I can get latex glues pretty cheaply but use Renia 315 in preference in case any of my products come into contact with people you who are allergic to latex.

Posted
10 hours ago, Matt S said:

One minor point, Renia Aquilim 315 is neoprene based rather than latex. I can get latex glues pretty cheaply but use Renia 315 in preference in case any of my products come into contact with people you who are allergic to latex.

In several sources I met the following:
"Unlike natural latex rubber, synthetic rubber is made from petroleum products and does not contain allergenic latex proteins."

But I'm in this issue a complete ignoramus.

  • Members
Posted
48 minutes ago, ABHandmade said:

In several sources I met the following:
"Unlike natural latex rubber, synthetic rubber is made from petroleum products and does not contain allergenic latex proteins."

But I'm in this issue a complete ignoramus.

I don't know for certain if latex glues like we might use in leatherwork use natural latex or a similar synthetic substance. I'd be curious to find out. However I do know that it doesn't take a lot of latex for an allergic person to have a reaction so I'd rather not take that risk.

  • Members
Posted

LeatherWeld from Tandy has worked great for me.

Posted
On 11/11/2018 at 10:37 PM, ABHandmade said:

 

Thanks! I looked at the possibility of acquiring Aquilim (Renia), EcoWeld and HALLER Hirschkleber in Ukraine. It turned out that only HALLER Hirschkleber is proposed from local suppliers. Considering that there is a warning “Do not freeze” for all these adhesives, I’m afraid to take risks and order international delivery - we already have temperatures below 0 at night.

This is really no joke.  The Renia representative would not send me samples by post during winter...If you want Renia buy now or wait until spring

Additionally, 315 should be spread thinly and in my experience allowed to dry for atleast half an hour, otherwise it clogged up my needle...

 

Alex

Posted
17 minutes ago, alexitbe said:

This is really no joke.  The Renia representative would not send me samples by post during winter...If you want Renia buy now or wait until spring

Additionally, 315 should be spread thinly and in my experience allowed to dry for atleast half an hour, otherwise it clogged up my needle...

 

Alex

We have winter has come: (

IMG_20181114_104526.jpg
An hour ago, I got EcoSAR 116 at the post office. I really hope that it not subjected to freezing in delivery time. In the evening I will try it and share my impressions.

Posted (edited)

Adhesive was obtained and tested. He did not freeze on delivery - Hurray!
So, the exact name EcoSAR MW 116 NG. This modification contains additives that prevent the glue layer from yellowing when exposed to sunlight. Special thanks to my supplier for this - I at first ordered the glue without this option.
Impressions of first use:
1. It does not stink !!! :)
2. Liquid and perfectly applied as very thin and even layer.
3. Corollary to p. 2 - an edge is perfectly burnished and almost imperceptible.
4. The time after application and until the parts are joined is 10 minutes.
5. The strength of glue seam is comparable to the seam, which gives the solvent-based glue.
6. The glue seam is elastic.
I'm happy! :)
Thanks again to everyone for the suggestions and advice that helped me find a solution to the problem!

Edited by ABHandmade
  • 1 year later...
  • Members
Posted

Hi, nice to read your adhesive test report. Thank you.
Do you have any feed back on EcoSAR MW 116 NG  rubber to leather?
Regards Con

Posted (edited)
57 minutes ago, Con said:

Hi, nice to read your adhesive test report. Thank you.
Do you have any feed back on EcoSAR MW 116 NG  rubber to leather?
Regards Con

In general, everything matches my first test from November 14, 2018. The only thing that was noticed was that after the jar was opened after some time, EcoSAR MW 116 NG became not white, but grayish. However, the remaining properties have not changed (it not stink, high strength of glue seam, elastic). There were no complaints about finished products either. So I can recommend :)

Edited by ABHandmade

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...