Jump to content

Anyone have a half size table for their industrial sewing machine?


Recommended Posts

  • Members
Posted (edited)

Just Made two extra short tables (i stil have more heads than tables but this does help)

E70679B0-997E-48D6-905E-92794238A565.jpeg

Edited by Michiel
  • Members
Posted

Had to mount de drawer under the head to fit

  • Members
Posted

Looks good, Michiel. For the type of sewing a lot of us probably do a big table isn't necessary, all they do is provide extra space to put junk on!

Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500.

Chinese shoe patcher; Singer 201K (old hand crank)

  • Members
Posted

Mr dikman must have been peeking in my sewing cave .. I have an old industrial treadle with drop leaves under my 31-15,  with the leaves down it is about 10" narrower, A nice feature for me.  Looking at my industrial treadle with a modern top  it looks like I could chop off 8" and still leave the drawer in place (it has full ball bearing support and actually works well)  ! That would be a huge help with crowding on that wall.  I  use the magic furniture slides under my machines .. things slide pretty well when needed and the tile floor doesnt seem to mind. Nice bit of inspiration.

  • 3 months later...
  • Members
Posted (edited)

Just FYI (should anyone else fall victim to the item originally referenced and sold by Atlas levy), "Short Table for industrial Sewing machines" by Atlas Levy's definition means table top only. 

If you buy this, you will find out the hard way once it arrives (like I did, when it showed up with out legs), and then be forced to pay more and wait longer for the rest of the table. 

And this was after I had placed my order over the phone (not on the website), verbally verified the machine that it would be for, and specifically requested k-legs over t-legs. 

Edited by deadtravis
  • 1 year later...
  • Members
Posted
On 4/27/2020 at 11:38 AM, deadtravis said:

Just FYI (should anyone else fall victim to the item originally referenced and sold by Atlas levy), "Short Table for industrial Sewing machines" by Atlas Levy's definition means table top only. 

If you buy this, you will find out the hard way once it arrives (like I did, when it showed up with out legs), and then be forced to pay more and wait longer for the rest of the table. 

And this was after I had placed my order over the phone (not on the website), verbally verified the machine that it would be for, and specifically requested k-legs over t-legs. 

I had been looking at buying that table myself. Their ad on their website reads:

Complete unit table and legs
Short table for industrial sewing machines
Table Top measurements:  32" x 20"  ( refer to pictures)
 
I would have pressed for the legs too, no additional charge. Says it's "complete unit table and legs" (??)
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...