Members mariuspirvu Posted January 29, 2020 Members Report Posted January 29, 2020 Quick and dirt cheap stitching pony we made as a diversion from working with leather only. It's made of a plank of pine wood from the local hardware store, three screws with nuts and a couple of wood screws. Took about an hour to build but it does its job well. A video of making it here . Pattern available here Quote Pattern maker at LeatherHub
CFM chuck123wapati Posted January 29, 2020 CFM Report Posted January 29, 2020 (edited) Great job! I built mine out of recycled pine from an old shipping container. two square shank machine screws, two wing nuts two washers and two wood screws and some leather of course. Edited January 29, 2020 by chuck123wapati Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Members mariuspirvu Posted January 30, 2020 Author Members Report Posted January 30, 2020 Looks great! I needed one that grips the table and pivots on two axis because I film what I make and a sit on pony wasn't helpful anymore. Quote Pattern maker at LeatherHub
Members DJole Posted January 30, 2020 Members Report Posted January 30, 2020 Gotta love that dual pivot for best placement! Happy stitching! Quote \D. Jole \ --> <http://djole.altervista.org/djole/Publications/Leather/Lindex.htm>
Members Ferryman Posted February 11, 2020 Members Report Posted February 11, 2020 Here is a stitching pony I made last weekend Quote
Contributing Member fredk Posted February 11, 2020 Contributing Member Report Posted February 11, 2020 nice suggestion: glue some magnets on the jaws, at the lower level of the outside leather. most useful for attaching a needle to whilst sewing. I have several magnets on mine Quote Al speling misteaks aer all mi own werk..
Members Ferryman Posted February 11, 2020 Members Report Posted February 11, 2020 Thank you FredK It was a piece of oak I had. I will certainly inset some magnets in the sides. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.