Members fks1 Posted February 4, 2020 Members Report Posted February 4, 2020 My first attempt at making this holster to accommodate a taclight. Quote
Members fks1 Posted February 6, 2020 Author Members Report Posted February 6, 2020 5 minutes ago, mwcondit said: very nice! The new owner was happy with it but wanted to post it here for any critique, good or bad. Thank you. Quote
Members akguy59 Posted February 8, 2020 Members Report Posted February 8, 2020 That looks very nice to me. I wonder if molding a little bit of detail wouldn't make a big difference in appearance. Quote
Members Simplejack1985 Posted February 9, 2020 Members Report Posted February 9, 2020 That looks super nice can you pm me some details I wanna try my first holster soon Quote
Contributing Member JLSleather Posted February 9, 2020 Contributing Member Report Posted February 9, 2020 Tough to see that area under the grip on the left one with that mag in the pic. What ya got keepin that one (on the left) from falling through the holster? Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members sinpac Posted February 9, 2020 Members Report Posted February 9, 2020 Clean Quote "It ain't about how hard you hit. It's about how hard you can get hit and keep moving forward." - Rocky Balboa
CFM chuck123wapati Posted February 9, 2020 CFM Report Posted February 9, 2020 Very nice ! Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Members fks1 Posted February 10, 2020 Author Members Report Posted February 10, 2020 11 hours ago, JLSleather said: Tough to see that area under the grip on the left one with that mag in the pic. What ya got keepin that one (on the left) from falling through the holster? Its one piece instead of two unlike the traditional pancake. The front and back piece are connected in front of the barrel. Quote
Members fks1 Posted February 10, 2020 Author Members Report Posted February 10, 2020 On 2/8/2020 at 8:02 AM, akguy59 said: That looks very nice to me. I wonder if molding a little bit of detail wouldn't make a big difference in appearance. Thank you, I would've liked more detail but It would've made it difficult to properly seat(or remove) the firearm. I agree the one on the right could've used a bit more detail up near the sight line however. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.