Members Hildebrand Posted November 2, 2020 Members Report Posted November 2, 2020 Title says it. I have a couple belts for my granddaughters and I would like to sew them but I only have about 3/16” between the tooling boarder and the belt edge. Thank you. Todd Quote
Members Constabulary Posted November 2, 2020 Members Report Posted November 2, 2020 depends on the needle and thread size you want to use. I would test this on some scrap leather. Quote
garypl Posted November 2, 2020 Report Posted November 2, 2020 Bob, do you sell inline feet for the 4500? Quote
Moderator Wizcrafts Posted November 22, 2020 Moderator Report Posted November 22, 2020 Watch a Cowboy CB4500 sewing along a belt edge with the inline feet. I got them from Bob at Toledo Industrial Sewing Machines. Quote
garypl Posted November 22, 2020 Report Posted November 22, 2020 Thanks Wiz - those look to do a great job! I was thinking about getting a set but they are a bit more expensive than I thought. I will wait until I have a definite requirement for this type of set and then order them! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.