Members Ragnar Posted November 20, 2020 Members Report Posted November 20, 2020 We are looking for a source of clicker steel , so we can make clicker dies in house. Most steel rule die material is made for insertion into a die board, not thick enough for welded dies. Any thoughts are appreciated. Thanks Quote
Members chrisash Posted November 20, 2020 Members Report Posted November 20, 2020 It would assist if you mentioned what country you are in as the site is international Quote Mi omputer is ot ood at speeling , it's not me
ljk Posted November 21, 2020 Report Posted November 21, 2020 www.ameriken.com has been my choice for many years. Quote
CFM Frodo Posted November 22, 2020 CFM Report Posted November 22, 2020 I have a suggestion that I do not know if it will work or not. If it does work, you could find this stuff at almost any house for free, metal banding for pallets It can be sharpened and can be bent https://www.cabletiesandmore.com/stainless-steel-banding-straps?pid=16088&utm_source=bing&utm_medium=cse&utm_term=16088&msclkid=c190403dc92f187377b61f879e2c7b70 Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles Stand your ass up during the National Anthem
CFM chuck123wapati Posted November 23, 2020 CFM Report Posted November 23, 2020 MCmaster carr, grainger Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
toxo Posted November 23, 2020 Report Posted November 23, 2020 Got mine from Partwell in UK so I d'on't think that's of much use. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.