Case Trapper Belt Sheath Laser Engraved

[Hags]

Nice work, agree with hole size, but are they cut with the laser? 

[JWheeler331]

Hey.......that's not a trapper in that sheath. 

 

Nice job on the sheath. 

[Dwight]

On 9/14/2023 at 5:55 PM, GrampaJoel said:

Bert03241,

I like your laser engraved item. Which is what you posted about originally.  
I have occasionally thought about buying a laser to enhance my  projects.
But not being real tech savvy I have been holding off.

So, which laser do you have?
Is it hard to use?

Would you recommend the model you have to a novice?

thanks 
Joel

Grampa Joel . . . you figured out how to turn on your computer . . . get to a search engine . . . call up Leatherworker.net . . . 

Believe me . . . you are well on your way to being tech savvy enough to run a laser thingy.

I got one for 50 bucks . . . long story . . . it is basically only for decorating wood and leather . . . will not cut out patterns . . . make wood projects . . . etc.

All you have to do download LaserGRBL . . . free software . . . and basically anything you can turn into a *.jpg . . . you can put on the leather.  I use Adobe Photoshop Elements 2.0 . . . another free program . . . make it all there . . . copy / paste to another "Laser" file . . . and I've got it.

The two things you have to understand is the power you are telling the laser to use . . . and the speed you want it to go.

When I have something I think "might" be what I want . . . I toss a piece of flat cardboard (the kind they make bigger boxes out of) . . . and engrave it first.  It'll show me if I'm too powerful . .  .  too slow . . . whatever.  There is a bit of a learning curve there . . . but after a couple days (laser burning takes forever) . . . you'll get a feel for it . . . and it's fun.

Amazon and Ebay have em out there starting at 150 bucks or so . . . which is what mine was originally I think.

You have to watch one thing for sure when purchasing one . . . sellers lie to you . . . tell you the machine is 40 watt or 50 watt or something like that . . . when they are in effect telling you that it consumes that power.  What you need to see is the OUTPUT power . . . and while mine is small . . . my next one will be in the 5 to 7.5 watt output.  That will be a bunch faster I'm told.

Anyway . . . think about it . . . but don't ponder forever.  While you were pondering . . . you coulda been playing.

May God bless,

Dwight

Edited September 18, 2023 by Dwight

[1961Mike]

On 5/7/2021 at 10:00 AM, sbrownn said:

Perhaps the flap would "look better" if it were rounded to match the outline of the sheath pocket instead of being squared off.

Thanks for being open to suggestions.

Hi

Personally I'd have squared them both off.  Easier to do and then it would match.  Matching the rounded ends in size is a bit harder to measure, but matching the way you did the top part is just measuring.  Of course, I'm an engineer, so I measure things...

Later