All Activity

https://springfieldleather.com/products/money-clip-redneck-np?_pos=1&_psq=mone&_ss=e&_v=1.0

They have a video on the listing of it starting up (some noise that goes away happens) and running without fabric or thread. So it does at least function in those ways. And I do love fixing things, which is why I'm kinda drawn to these older all metal machines. If I could find one with good documentation and parts availability, I'd be happy as a clam.

The cutline looks interesting. Anybody know if a manual is available for those? I put in Asheville, NC and started searching. How about some of these: Tacsew gc6-6: https://www.facebook.com/marketplace/item/1217068313162876 Adler: https://www.facebook.com/marketplace/item/1256624485648626/ Unknown walking foot: https://www.facebook.com/marketplace/item/1411826190265789/ Nakajima: https://www.facebook.com/marketplace/item/1685486795446778

I wanted to precisely punch centered oblong holes in 1 1/2" belt blanks for attaching the buckle. This jig allows me to it easily. The punches are sandwiched between blocks and screwed together. The blocks were sized to snuggly fit into the 1 1/2" wide box that the belt blank slides into. They were also cut to allow the punch to be centered in the jig. The blocks are easily removed whenever I need to use the punch without the jig. They are held together with flathead screws and Tee nuts.

Post some photos of the machine.

Cheap! Has it sewn recently, or has it been stored in a barn? (affects how much cleaning it needs). You could ask sellers of any of these to demo sewing five layers of vinyl. Another option is to post your own ad. By the way, do you enjoy fixing things?

Do you have any parallel sided screwdrivers? (Hollow ground) My first set of hollow ground was just whatever I could collect from all the stray screwdriver bit sets. Eventually had a variety of sizes.

I moved your post to leather sewing machines. I think you'll get more response here.

I do like that style of clip, but didn't see it on offer anywhere. Have you got a source for this kind of hardware? As to the evenness, I could use some more attention there. The visibly irregular one (with the Cdn flag) suffered a bit from my being very new with the drum sander. I should probably make a table for it. Tool-rest kind of thing.

That's some good work there. Agreed...practice, practice, practice.

Thanks for sharing your work. I agree, that style of clip can be kind of boring. I really like the type that attaches to the outside of the wallet. A suggestion i would make is for those pieces you sew together, cut one of the pieces a little larger, then after stitching, trim them down so they are even.

Thanks for gently keeping me from the edge. This certainly is making me crazy. I'm really only steering towards flatbed because of budget reasons. That one Singer came up because it's in the range I'm able to spend right now. And for my most pressing concern being the boat seats, the cylinder arm isn't really necessary. I think I'm trying to just maximize my spend since both space and money are restrictive for getting endless machines. It also seems that to get any machine at all, I'm going to need to drive an hour and a hall or more in almost any direction. I'm getting worn down by the idea of so much travel to see machines that maybe need work or won't actually do my boat seats. Additionally, there is no one nearby that works on industrial machines. I did find a guy that's willing to travel to me, but I don't know anything of his reputation. All that is to say that if something on the list looks more reliable than the next, I'd like to just go that direction. I looked for the other models recommended, but came up short (presumably I live in a machine void, which is odd since there are so many creative people here) and time is running out to finish my project. I think I'm just afraid to make the wrong choice. If anything happens with whichever machine I choose, I'm likely going to have to learn to repair it myself, so good documentation and parts availability would be helpful. And you can bet I'll come back here for advice on that. Thanks to everyone for your help!

Finished another one. Used a sub-standard piece of leather because it's what I had. There are a couple of fat wrinkles running horizontal through the center of the portrait. I don't think I nailed the likeness, but this is why we practice.

I've been happy with the chrome tanned billet bends from Naudin and Booth. https://boothandco.com/products/booth-saddle-strap-leather-rawhide-cow-billet The leather is stiff with little stretch. I believe it is tanned by Thomas Ware and Sons in Bristol. Perhaps it is available from UK suppliers? It seems that dressage saddles have a wide range of billet lengths and hole patterns that I like to match. My personal record is 33" billets on a Hermes saddle.

I just got a hide in from Wicked & Craig Natural Skirting 8 to 10oz. I made these similar to my gun belts a little thinner. One piece is 8 to 10 oz and I skived down one about 5oz. They are a little under a 1/4". The old Landis 16 is sewing really nice. Thanks'

Welcome from SW Missouri USA. That's pretty cool.

Let me know what you find out on the Judge blue guns. May be interested.

Lever actions are probably my favorite rifle AND I love a lever action pistol as well. All great examples of holsters for them. Thanks for posting your work!!

Those are really nice! I have never tried one of those slings. You may have inspired me to take a crack at one. Thanks.

For me the type of strap cutter I use depends on the thickness and width of the strap. I use an inexpensive wooden strap cutter for thin leather (<7 oz) and narrow straps (3/8"-1"). The wooden strap cutter is also handy for cutting straps from small pieces of leather. Abbey England sells one that is as good as any I've purchased in the USA. I do sharpen and strop the blade, holding it with a surgical needle holder (heavy duty hemostat). For 6-12 oz straps that are 1/2"- 1" wide I use a draw gauge. @bruce johnson has some nice draw gauges that are ready to use, and a tutorial on his website about how to hold the draw gauge. For heavy and wide straps (> 3/4") I use a plough gauge that I bought from Vergez Blanchard. I did spend some time reworking the angle of the knife blade (~15 deg) and I put a small bevel on the back side of the knife to keep it from pinching the strap excessively against the gauge. It is my go-to tool for cutting lots of straps from a side of 9-10 oz leather.

There's a heap of great advice here. A few more bits to add to that list: good music:, my most recent market at the weekend, the muso was good, but he needed to expand his ' repertoire ' , it was a bit repetitive. The type of music being played can make a difference at a market, the overall atmosphere, the way people browse and buy, and so on. Crap or too loud music can drive them away. The music at one market I went to made it sound like a funeral. At another, the 'singer' couldn't sing, the only thing missing was a howling dog and the vendors had their hands over their ears 👂 🙉 Food stalls near by : Depending on the food, ( aromas) can either invite people to a market or drive them away. Location Location location 🎶 I have some ' goth boots ' with spikes all over them ( they are on here somewhere), and wow , they sure attract people IN to my stall. They ask questions, take photos etc. I then, talk leather, show them pics of everything I have made in my folders, my machines, a few ' how to ' pics and so on, keep them interested, i at least sell one or two items😀 HS

As a note the higher the number at the end means the more recent the machine was made with the Consew 206rb-5 being the most recent. Base on my own experience of owning a couple of Consews with the last one being a Consew 206RB-5 I can not recommend them. From your list it appears you have decided on a flatbed so the next thing is decide on a budget otherwise you are going to drive yourself nuts. Is this machine going to be your main machine and your first machine? kgg

You didn't mention if it was a motorized strap cutter or a mechanical one that you are looking for. ????? kgg

Hi all,I have owned a strap cutter for about 20 years with good service but has now sadly given up on life.i recently bought a cheap one which unfortunately proved to be false economy.i wonder if anyone can recommend a reasonable model in the UK please?thanking you in anticipation, mark

I found a couple machines on marketplace that weren't mentioned in this thread, but seem like they'll work. Thoughts on these? Singer 211g-155 for $200, looks to be on good shape in the pictures Singer 211g165 for $700 Cutline C225 for $350 Singer 153K103 cylinder bed for $1000 And then these various Consew 206RB's: Consew 206RB-1 for $1250 Consew 206RB-2 for $750 Consew 206RB-5 for $1195 Sorry for the continuous questions!