Jump to content

Steve Brewer

Contributing Member
 View Profile  See their activity

  • Content Count

    359

  • Joined

  • Last visited

Everything posted by Steve Brewer

  1. Steve Brewer
    Darc,I have had trouble with the Sleeves also.If they don't order Belvins,I use Superior buckles on almost every thing ordered with Quick change buckles
  2. Steve Brewer
    Lee,I like the verticle Blevins made of brass the best.The posts don't corrode and last lomger.Like Bob said they don't weaken the leather as much as the horizonal ones do. Steve
  3. Steve Brewer
    Mark,I hope this helps It's my Shop check book cover Steve
  4. Steve Brewer
    It's a piec e of latigo 1 3/4 wide x 4 foot long.A loop in one end and the eadges skived.Pull it aroun your horn a couple of wraps and put a stick or hammer handle and pull the slack out of your wrap
  5. Steve Brewer
    Tim ,Skife the edges.Soak the wrap a little and soap it.Tack the left side down and wrap.I use my hammer handle to pull it tight.Then put the tail under the tacked down part and pull tight.Now use the Chinaman to slick it down
  6. Steve Brewer
    Who made the geo stamp?
  7. Steve Brewer
    Nice clean saddle JW.I think I would have stamped the flat plate,only thing I would have changed. Thank's for sharing Steve
  8. Steve Brewer
    Mark,Nice job on the slobber straps Steve
  9. Steve Brewer
    When i made this skirt pattern I laid a flat plate patterrn over my skirt and came up with it.
  10. Steve Brewer
    Jon,Thank you.We try to build 2 to 3 a month.Some times we don't get it ,when we have a lot of carving to do. Steve
  11. Steve Brewer
    Thank's everyone,This tree came from Quality MNG.
  12. Steve Brewer
    I cut the plug out in one piece. Steve
  13. Steve Brewer
    Tim,When they are ordered you have to put your likes and dislikes aside and build what pays the bills. Thanks for your post. Steve
  14. Steve Brewer
    Just finished this saddle,it is a 15 1/2' seat ,8 1/2" swell ,4 1/2 x 11 " cantle,3 1/2 x 3 1/2" post horn.A 3/4 skirt rigged,with a floral corner carve.
  15. Steve Brewer
    nice job mark,I like it .That is a nice pattern that is done well Steve
  16. Steve Brewer
    Thank you Mike Steve
  17. Steve Brewer
    This is a saddle I just finished.It is on a Butch Casidy tree,15 1/2" seat,no.6 Dally horn,4.5' cantle,8 strung and a loop seat.She wanted a flower on the horn and flowers on both sides of the cantle.
  18. Steve Brewer
    JW,What are the specs on the tree?
  19. Steve Brewer
    The swell is 13 1/2' it is under cut a 1 1/2 ' on both sides
  20. Steve Brewer
    Looks good JW,sometimes we just have to try them out. Steve
  21. Steve Brewer
    A person should be able to ride a pretty tough bronco with the leg cut,it is an 1 14 " on eachside
  22. Steve Brewer
    This saddle is a 15 3/4 seat will james ,13 1/2 " swell,4" x 11 1/2 wide cantle,3 x 3" dally horn.It is Ruff out and basket stamped,Quality Mfg. tree. And its for sale
  23. Steve Brewer
    Tim,Iam asking $3080 for it Steve
  24. Steve Brewer
    I have a Will James Saddle that is for sale.It is 15.75" seat,4" cantle,13.5" swells,and a 3x3" dally horn.6.25 x 8" gullet
  25. Steve Brewer
    Been using Thourobred out of Kentuky.Seams to be pretty good
×
×
  • Create New...