Bevan

Very nice work mate ,,, you have just taken it to a new level !!!! Cheers Bevan www.bwrwhips.com

Gday Nick I make a resizer/beveller tool If you want a look at it go my website. click on leather care & tools there is a link to you tube Cheers Bevan www.bwrwhips.com

I am an aussie and will be going spot lighting tomorrow night ,, so tell me what colours you want and i will see if i can get them for you !!! cheers Bevan

Ego !!! No mate , not at all !!!! Our customers buy our gear for what evey reason they want it for ,,, most want to use it for what we make it for ,,, some want to hang it on the wall and use it as art ,,, who is wrong and who is right ???? I think they can do what ever they want with it..as long as the dont wreck it !! cheers www.bwrwhips.com

Very nice work Mate ,,, yes i can see the shabbie work you have done ,,, but but but still very nice ,,, lol Cheers mate

What size is it and how many strings did you use to cover the core ?? Very nice work Toni thanks for sharing Cheers www.bwrwhips.com

You have two rows of stiching on the bottom and 1 on the top , which i like ,,, but your feture piece is the snake print which is off set to the top up against a line that makes it look too off set !!!! thats only my opinion mate ,,, but nice work all the same , I know pictures seem to show a little , some times alot more than the eye does see !!! How did you do your edgers ??? Spinner from this forum has a great little tool that I am sure you will want one if you dont have one already !! Thanks for posting Cheers Bevan www.bwrwhips.com

Gday all , good subject !!! I use a brass needle that the leather screws into the end and I tie my buttons /knots straight onto the job , I try to keep an even amout of tention as I form my knot towards the end the knot gets very tight , but out of habit I will see if I can get it any tighter with my fib , then roll it and cut With my nosebuttons on my bosals 32 strand , 4 strings 8 bite then interweave , I have not had to retighten one yet because as I said I try to keep even tention and as you form the knot it becomes very tight So I dont know what the answer is but sometimes I do have to sometimes I dont and sometimes I just do out of HABIT !!!!! It might just have to be up to you !!! Cheers Bevan www.bwrwhips.com

YEAHAAA You go to the top of the class Now that is much better Annette Cheers Bevan Ps ,,, keep posting tho ,,, that might have been a fluke!!!!!!!

Now that is some bloody lovely work you have done there mate !!!!! Cheers Bevan www.bwrwhips.com

Yes indeed ,,,, very classy , When you ; go to forum then scrolll down to Braiding , a lot of braides might miss it if not in this section and a tutorial would be very nice to see !! As i said ,, very classy work Cheer www.bwrwhips.com

Gday mate I agree with Chris , if you just take a beez dick off your lace and leave the foundation the same I am sure you will get it spot on Also were your black string is covered have a good look , from what I think I can see you have gone over 2 ,under 2, over 1 under 3 ??? over 2 that is in your first picture of your long button from the left hand side !! then i think it looks like you have gone over three with your black string on the right hand side Not sure because I do need glasses Please let me know , I will get some tomorrow Bevan

When I do twisted cores I store them on a piece of PVC pipe which i cap to keep the moisture out , yes they will stand in the corner because they are on the very stiff side ,,, Plaited ones I lay flat because they are very flexable Depending at what stage your horse is , depends on what stiffness bosal you need ,, my boy is just as good in a rope holter or using his mane for brakes and my inner thigh for direction At the end of the day its not about the looks or $ to me its about the horse !!! Cheers mate I hope this helps, if you want any more info that i hav'nt given you just email my at bevenis@hotmail.com and i will try and send you more info and pics on the stretcher and rat shits !!!! rachets, there ya go 4t4 www.bwrwhips.com

Gday Aggie for my twisted cores i just cut a 1 inch strip with a straight edge and stanley knife then twist &stretch ,THIS COMES FROM THE BACK ,I split it to the thinnest that the hide is , just to make it all the same ,, with my plaited cores ,,, depending on what i want, i will cut 4 strings stretch ,bevell resize then split with my beveler/ resizer tool, they seem to come out very even and round with the 4 plait , with the 1inch strip i still split it but i will have to do a bit of sanding to get it even ,(you can buy this tool at any hardware store for stuff all ) Sorry i hav'nt had a chat for awhile but hopefully i will get back in to the swing of things soon Cheers mate www.bwrwhips.com , The rat shits r only to stop it from unwinding I only apply hand press

ring ring ring ring

Very nice clean sharp look-n work there Mike Cheers Bevan

Gday Annette Look-n good mate , keep posting the pics and it looks like you have that beveller sorted now Good job mate

Excerllent bit of craftmanship spinner !! This guy is a Ledge !!! that is a small utilety shelve where I come from !!!! but i believe is not as good looking as one !!! I think he is !!! Mate

Bloody hell mate , you are harder than the missus !!!! and i love her dearly Cheers mate I will see what i can do

BUT BUT BUT I was in a hurry to go back up river ,, just needed a hat band quick ,,,, Cheers Bevan

LOL Never give up the pocket knife mate ,,,

Thanks Jason How have your chaps been going ?? I hear you have a patten for me !!! I would love to do some but I want a machine first !! I have see some that where laced and they looked very nice, with all the yoke and stuff been laced on they but must have been heavy !!!! How long before you head overseas ?