Jump to content

biker55

Members
 View Profile  See their activity

  • Posts

    127

  • Joined

  • Last visited

Everything posted by biker55

  1. biker55
    If this is your first project, you need to open up your own business! great piece of work. I'm also new at this, but I think I'm going to have to practice for a few more years.
  2. biker55
  3. biker55
    thanks for the responses. got my answer
  4. biker55
    hello, I've noticed that on some people's projects that the stitching isn't in the crease of the molded area. isn't there a chance that the leather might lift up? thanks
  5. biker55
    hello folks, the couple of projects that I've done so far I've been using the satin sheen to coat it. does this protect the leather from the weather? or do I need to put a water proofer on it? and if I do need a waterproofer, do I use both? thanks
  6. biker55
    is the welt the piece of leather that prevents the blade from cutting the thread? thanks
  7. biker55
    the reason I'm asking this question is that recently with the scrap pieces of leather I've been getting at the local hobby shop some of the leather that I'm using isn't too stiff. is there a rule of thumb as far as how stiff a sheath should be or is it a personal preference? thanks
  8. biker55
    I like it too. beautiful work!
  9. biker55
    I'm speechless, that's why I'm typing. you are talented my friend.
  10. biker55
    very talented. every time I browse this site I'm always amazed at the talent shown. this just inspires me to try to reach the level that these people have achieved. keep em coming!
  11. biker55
    nice work. if you don't mind me asking, how'd you get your stitching groove so wide and deep? I use a stitching groover, but even after several passes, it is still shallow and very narrow. thanks.
  12. biker55
    thanks for the response. will have to figure this out.
  13. biker55
    Hello folks. I would like to put a stamp design on things like cell phone cases, knife sheaths, and maybe holsters when I get better at this leathercraft thing. my question is, do you stamp the leather first before molding, or visa versa? thanks
  14. biker55
    thanks, what's DOT? purchased the tandyfactory snaps from my local craft store which included the anvil.
  15. biker55
    I'll give it a try. thanks
  16. biker55
    hello all, can someone give me any tips on attaching snaps? usually I'll mess up a couple until I get one to work. the the button won't stay still on the anvil which causes a lopsided strike. is there a better tool for this? thanks
  17. biker55
    thanks all for your advice. will see which works best.
  18. biker55
    thanks, will give it a shot.
  19. biker55
    thank you. thought it'd be more complicated.
  20. biker55
    Hi all, any advice on how to mark stitching holes in black or dark leather so that you can see it better? my eyesight isn't as good as it use to be. thanks
  21. biker55
    Hi all, are there special paints for leather? also can I use color markers for coloring? sealants to seal or protect colors from fading? any advice will be greatly appreciated!
  22. biker55
    hope this posts. sorry for the bad image. took it with my cellphone.
  23. biker55
    hello all, want to try my hand with an awl. what size awl do I need for hand stitching? thanks
  24. biker55
    wow winterbear, you sound like the csi of leatherwork. anyway the finish side is matt finish, not colored rigidity is somewhere in between. very easy to mold but softens up . on the rough side it's darker. Iill try and download a picture/s. tomorrow. thanks for responding
  25. biker55
    had purchase a bunch of scrapleather from a local craft store. I'm trying to identify it. maybe someone might know thw answer. it isn't too rigid, creases easily, and when I drill holes in it with my drill press the edge of the material kinda separates. thanks
×
×
  • Create New...