Hildebrand

Looks like a good start, 2 things I would look at when you make your next one is grip clearance, looks like it might be difficult to grab the grip of the gun, second is make sure you don't cover the magazine release. Todd

I can’t help on the thread issue but, yes you have to back stitch to lock the stitches.

I like the discussion @bruce johnson I will throw out there, slicking or burnishing really only matters to us leather workers. Most customers don't even notice the bright shiny, glass smooth edge on a piece unless you point it out and then they usually just glance at it and say, that's nice. Todd

I use water and saddle soap, Don Gonzales has a great YouTube video showing how to do it. I tried all kinds of things before I started doing it this way and this is the best I have found. Still takes good square cutting and some sanding but makes edges you can be proud of. Todd

Saw the beautiful work by @Stetson912and decided to give the pattern a try, I am not a floral carver so I went with a basket stamp. I really like the pattern it is a great fit for the weatherman tools. Todd

One issue I have had with the Aquillim 315 is it is difficult to get good smooth edges. It's like it leaves a rubber cement type of substance on the edge when you are trying to sand it. I have not been able to get rid of it. Which is too bad because and odorless contact cement would be awesome especially in the winter since I have to go out to the shop to use the regular stuff due to the fumes. Todd

Customer just picked up this holster. His son had me make him one a few years ago for a .41 magnum and he wanted one similar to it for his 22 lr. I have a love hate with white thread, if you don't die and finish before stitching it takes on the color of the die. In this case with it being lined I needed to sew the top edge before assembly so I did without it being died and paid the price when the top stitches disappeared in the die. White edge stitches still popped pretty good. He is tickled with it, I was able to use my 3-D printer to print his initials rather than hand cut them. The 3-D stamp is much cleaner and easier.

@cowagonwheel I would ad a caution that leather harness that old with unknown care should most likely be retired for display only. Really bad things can happen really fast if harness gives way while pulling a load. You didn't say if you were cleaning for use or display so I thought I would throw this out there. Todd

This is the stamp I printed for this sling.

I got the logo as a .png file then used the adobe free program to convert it into a .svg file. I imported it into tinkercad and added a little text, I increased the height of everything then I made a base for it not as thick as the logo and text. Then I put the base on the logo, evened the top of the base with the top of the logo, this leaves what you want to make the impression with sticking out of the base, I combine all pieces then rotate it 180 degrees so it is lying on the base with the impression parts sticking up. This lets you print it without supports. Then export as an .stl file and you are ready to print.

I just use regular PLA, for the depth I just experimented a couple times. I am not sure how many mm I am pressing it in. I will try to remember to take a picture of the stamp itself tonight and measure the depth on it. Todd

I use 3d Printing to make 1 off stamps. I have been doing some prizes for events and I was able to get the logo from the event and 3d print a stamp to customize the prize. I did not print the makers stamp just the Mark Allen Hampton Stamp on the left. Todd

I use a set of calipers to find that 4th hole, leave machine in forward but stitch back to the start point, stop the needle just after it starts back up and the turn the work around and stitch forward through the stitches I just made. I don't have to worry about forward and reverse stitches being exactly equal in length. I keep scrap around so I make sure how long 3 stitches is currently on the machine. Todd

I have never done any saddle work but could you countersink a tee nut from the other side and use a machine screw? Todd

I have no experience in this area but I wonder if that is a straight press mold and no additional hand tool usage. Todd