Search the Community
Showing results for tags 'tippman'.
Found 13 results
-
I recently came into possession of a Tippman Boss leather sewing machine that I don't really have a need for. Need to sell to fund a new barrack machine which I desperately need. The Tippman looks to be in great shape and came with a lot of accessories. Tippman Boss Machine Cobblers bench Flat bed attachment material guide extra needles extra presser foot 2 large spools of white thread 2 large spools of black thread 1 large brown hide 1 large blue hide 1 soft blue hide handful of metal zippers Looking to sell as a package deal for $1600 located in Orange County. I don't have boxes so local pickup is preferred.
-
Tippman Boss hand stitcher Leather sewing machine sews through 3/4" leather or canvas etc. Sold with 8 bobbins and a fleece foot and table with oak top and singer treadle base bottom Machine works great. Has been well maintained with many new parts Used recently Also includes a hand bobbin winder $1400 can located in southern Ontario Canada
-
Used tippman boss. Well maintained. Works well. It has been used recently. Sold with a table. A manual. The starter kit with Allen wrenches. $1500 Canadian
-
I am selling a Tippmann 1500 Die Cutting Press. It comes with the air accumulator which cuts your cycle time in half. I have built a custom table with castors for easy mobility. I will upload photos Monday when I get into the shop. It is in perfect running condition. I am asking for $2,500 plus shipping. Shipping can be organized through www.freightquote.com pretty easily. Attached is an image of the shipping setup (dimensions, weight, class, etc.) I would be shipping from Tacoma, Washington (98409) - local pickup also available.
- 2 replies
-
- clicker
- clicker press
-
(and 2 more)
Tagged with:
-
We are selling out our complete shoe repair and custom bootmaking shop in Poplar Bluff, Mo. We have two post machines that are like new, bought from Nick o Sew a couple years ago, one single needle, one double needle. There is also a Boss Tippman that is still just like new bought only a year ago. The rest of the shop equipment is older but in good working condition. There are 250 pairs of cowboy boot lasts and shoe lasts on which 7 toe styles can be made...some barely used. Full size runs with widths from AA to EEE or wider are represented in most styles. There are lots of supplies including thread, soling leather, rubber soling, heel bases and lifts, upper leathers and even some exotics. Would like to sell as a complete package. Buyer must come to the shop and arrange moving. Call 573-686-4545. No calls after 9pm central time please. I will not respond to texts. I can email detailed photos upon request. Asking price for complete shop package is $15,000. Let`s talk.
-
Selling my Tippman Boss sewing machine. Great shape and works great, just not doing much leather work anymore. It's had not quite a spool of thread run through it. Comes with cobblers bench. Flatbed attachment. Offset presser foot. Many extra needles. 1/2 a roll of white and brown thread. Extra bobbin. Original tool kit. Ready to go. EMAIL- mesquiteranch@hotmail.com Phone 361 701 1846 Orange Grove, TX Thanks $1300 obo plus shipping.
- 1 reply
-
- leather stitcher
- tippman boss
-
(and 3 more)
Tagged with:
-
Anyone looking for a clicker press should checkout the Alpha Sample Cutter presses made by Thwing-Albert Instrument Company of West Berlin, NJ, USA. They have two models whose specifications seem to exactly match those of the Tippman presses. The link below will take you to the 15-ton press. You will find a link to the 7-ton press at the bottom of the page. http://www.thwingalbert.com/15ton-alfa-sample-cutter.html While shipping and import taxes make them cost FAR too much here in Bangkok, back there in the States they may cost less than the Tippman versions if you purchase them directly from the manufacturer. If anyone checks it out, please, let the rest of us know what you find out. Cheers! Maverick PS: In the first version of this post the link I included only took you to Thwing-Albert's landing page. The link above takes you directly to the 15-ton press.
- 1 reply
-
- clicker press
- tippman
-
(and 1 more)
Tagged with:
-
2 years old - only used 2 months before going into storage. Dies are for knife sheaths and welts for four different sizes. Located in Missouri. $1,500.00 May call 417-252-7463. Thanks. The Tippmann Clicker 700 Die Cutting Press delivers 7 tons of cutting pressure at the touch of a button. With this kind of cutting power, you can count on the Clicker 700 die cutting press to deliver a perfect die cut every time. The Clicker die cutting press can cut a wide range of materials such as plastics, rubber, fabrics, gaskets, leather, paper stocks, etc. This is a very versatile machine. The Clicker's cast-iron "C" frames allow for easy loading of dies and materials. Just place the die and material on the Cutting Deck, press the Dual Palm Buttons, and in less than three seconds you will have a perfect die cut. Designed with very few moving parts, clicker die cut machines are easy to operate and maintain. The Tippmann Clicker 700 patented Air System raises the Cutting Deck to give you 7 tons of cutting pressure. Requiring no electricity or hydraulics, this die press operates off of 80-110 PSI of air pressure. The Clicker 700 mediumcapacity cutting area (12" X 12") allows for countless die cutting patterns. Tippmann also manufactures the Clicker 1500 die cut machine which delivers up to 15 tons of cutting pressure and has a (12" x 24" ) cutting area. Air operated die cutting presses deliver tons of pressure at the touch of a button. NO electricity or hydraulics required. These die cutting presses operate off of 80-110 psi Die cut plastics, rubber, fabric, gasket material, leather, paper card stocks, etc. SPECIFICATIONS: Make.................................................................Tippmann Model...................................Clicker 700 Die Cutting Press Cutting Pressure..................................................... 7 ton. Cutting Beam......................................................12" x 12" Cutting Area........................................................12" x 12" Deck clearance...........................................................2.0" Travel of deck is adjustable up to .................................1.0" Recommended die height...........................................1.25" Approximate Shipping weight..................................260 lbs Operating Pressure..........................................80-110 PSI Overall Dimensions.............................12" W, 19" D, 13" H
- 1 reply
-
- knife sheaths
- clicker
-
(and 3 more)
Tagged with:
-
Tipman Boss in like new, perfect working condition. Bought this new about ten years ago. Light usage. Upgrading to a Cowboy 4500. Aluminum casting model (about 30 pounds) Easy to move around and just clamp to a bench or mount with bolts. It comes with the Standard presser foot and includes Flatbed Attachment - $135 value Extra Bobbins Extra Needles Original box The Tippman Company of Fort Waynne has excellent support if needed. hey have posted some excellent videos for adjusting and replacing parts if ever neeeded. It is a very clean, simple machine. You will need a few allen wrenches to adjust and change needles. I can supply pictures if needed but they all look about the same. Asking $1100 plus shipping. Local pickup would be in Kalamazoo Michigan. You can call me at 269 207 9688 peace, ed
-
I have the opportunity to buy this cast iron Tippman Boss in excellent condition. I think most of you will advise me to buy it. But without me telling you what the guy wants for it, what do you think is a fait price range for this machine? Does anybody have more info about the red version of this machine?
-
Hello; I have seven (7) Tippman Boss bobbins for sale. Three of these bobbins come already loaded with white thread #277 Two of them are loaded with White thread #277 and Two of them are loaded with Black thread #277 You can either use the thread or toss it, whatever you like. All seven (7) bobbins for $20.00 plus whatever the shipping is in a small padded Manila envelope. Please PM me if interested. Thanks for looking Bud
-
I am selling my Tippman Boss Sewing Machine. It is 4 years old and used less than a dozen times. Comes with needles, bobbins, extra gear and all the usual accessories. Priced at $1,000.00 I also am selling a Helmold Bender/Cutter that has a few dies but is missing an anvil - Priced at $200.00 Located in Bellevue Iowa which is between Dubuque and Davenport. Please contact Ron Koppes @ 563-249-2340
-
I'm selling my Boss on eBay. It's the aluminum one and was made in 2001. http://www.ebay.com/itm/Tippmann-Boss-Leather-Hand-Stitcher-/150973039983?pt=LH_DefaultDomain_0&hash=item2326b1c56f Thanks
- 1 reply
-
- tippmann boss
- tippman
-
(and 5 more)
Tagged with: