DaveP Report post Posted August 26, 2022 As above...looking for good both bi-fold and tri-fold acrylic templates for men's wallets. With multiple card holders large enough to actually get several cards into each slot. Hopefully something you have actually used and really like. Thank you in advance Quote Share this post Link to post Share on other sites
battlemunky Report post Posted August 26, 2022 Try Etsy. I grabbed some bi-fold templates from there a while back and they are great. The problem is that there a million to choose from and a thousand vendors selling them. I went generic and then I just add my own flair to them. Quote Share this post Link to post Share on other sites
DaveP Report post Posted August 26, 2022 Thank you Battlemunky Quote Share this post Link to post Share on other sites
Glendon Report post Posted September 3, 2022 I really like the templates from Maker’s Leather Supply. How many cards you can get into a pocket is really going to depend on the thickness and temper of the leather you are using. Thinner softer leather is going to give you more space for cards. Quote Share this post Link to post Share on other sites
Dwight Report post Posted September 3, 2022 On 8/26/2022 at 9:54 AM, DaveP said: As above...looking for good both bi-fold and tri-fold acrylic templates for men's wallets. With multiple card holders large enough to actually get several cards into each slot. Hopefully something you have actually used and really like. Thank you in advance Several years ago . . . standing in Tandy's . . . a fellow came in and asked the manager to make him a billfold. Manager pointed him over to me. His daughter had bought him a tri-fold a number of years ago . . . and it was simply worn out. He wanted a new one. I told him I'd try . . . but needed his billfold for a pattern. He got a bag from the store . . . dumped his bilffold comtents into it . . . gave me the old one . . . I copied it . . . and he was elated. These pictures are of the trial run I did . . . but they show the results . . . and you can copy that. He put several cards in each slot . . . and had a money clip in the middle. May God bless, Dwight Quote Share this post Link to post Share on other sites
fredk Report post Posted September 3, 2022 (edited) On 8/26/2022 at 4:25 PM, battlemunky said: . . . The problem is that there a million to choose from and a thousand vendors selling them. I went generic and then I just add my own flair to them. I've bought several acrylic and hdpe templates off ebay from Chinese sellers. The patterns are grand. Most even have stitching holes punched / drilled in them so you/I can mark the stitching, saves a bit of time for hand sewing Edited September 3, 2022 by fredk Quote Share this post Link to post Share on other sites
Doc Reaper Report post Posted September 3, 2022 I went that route for about three purchases and then decided to go with a Harbir fright pneumatic hydraulic bearing press, and buy clicker dies, there are an awful lot of criminals out there, Sandy at Int die was one of them. They are now closed and trust is completely gone. I purchased an Acrylic wallet set and it cost way too much for what I got! be careful as all hell Quote Share this post Link to post Share on other sites
GatoGordo Report post Posted September 3, 2022 If you have a 3D printer you can just print your own for a lot cheaper than someone else's acrylic set. Quote Share this post Link to post Share on other sites
