Jump to content

Recommended Posts

  • CFM
Posted

So after searching the globe for a new ball cap and not finding anything i liked i decided to just make one. Pulled a wallymart hat on close out for 4 bucks. Made it into oil cloth first then added the brim and band. It is dyed and finished only with antiquing and super shene, Skived the edges  so it doesn't look bulky and sewed it on with my Chinese shoe patcher. I screwed up a few stitches but the patcher didn't,  it ran flawlessly. This was the test run for my patcher and my it did great I'll be selling these bad boys they are soooo redneck lol.

hat1.JPG

hat2.JPG

hat3.JPG

Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms.

“I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!

  • Members
Posted

You have outdone yourself again Chuck. That’s off the hook. 

  • Members
Posted

That's awesome... Might have to follow suit on my favorite hat

 

 

  • Contributing Member
Posted

Nice job Chuck per usual, yup red neck is right but very cool.

  • CFM
Posted
1 hour ago, 327fed said:

You have outdone yourself again Chuck. That’s off the hook. 

 

22 minutes ago, Ddat said:

That's awesome... Might have to follow suit on my favorite hat

 

 

 

17 minutes ago, Samalan said:

Nice job Chuck per usual, yup red neck is right but very cool.

Thanks guys !! 

Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms.

“I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!

  • Contributing Member
Posted

I really hate wearing ball caps but that one is sooooo good. It just looks the right one for a-goin huntin in

Al speling misteaks aer all mi own werk..

  • CFM
Posted
22 minutes ago, fredk said:

I really hate wearing ball caps but that one is sooooo good. It just looks the right one for a-goin huntin in

Thanks Fred you know i was thinking about your your hat bands and contemplated making the band a bit wider and adding about three 22 cal bullet loops on each side.

Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms.

“I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!

  • Members
Posted

Great job, I like you oak leaves and meandering design. Kinda looks like I might have done it. I like what you did. Keep up to good work. 

  • Members
Posted

That looks awesome Chuck.

Posted

Chuck,

Make Fred's like a Sherlock Holmes deerstalker with two brims.....  :))    Derned fine piece of red necking.  

Fred, do you have a pipe??

  • Contributing Member
Posted

I have several pipes, but not a meerschaum, and I keep my baccy in an air-tight glass jar

Al speling misteaks aer all mi own werk..

  • Members
Posted

That's awesome!

  • Members
Posted

:thumbsup: Redneck  Chic !!!!

  • Members
Posted

Well done  on that friend :specool:  ' If you can't buy it, make it ' 

HS

' I have a very gweat friend in Wome called Biggus Dickus,

He has a wife you know, do you know whats she's called? Incontinentia.......Incontinentia Buttocks '  :rofl:

Posted

Nicely done.

kgg

Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver

Posted

Great tooling work on that!  Does it make the bill much heavier where it wants to ride down while wearing?

In God's Grace,

Pastor Bob

"While we were yet sinners, Christ died for us." - Romans 5:8

www.PastorBobLeather.com

YouTube Channel

  • CFM
Posted
16 hours ago, Bawarrior said:

Great job, I like you oak leaves and meandering design. Kinda looks like I might have done it. I like what you did. Keep up to good work. 

thanks!! your work does inspire folks lol.

Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms.

“I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!

  • CFM
Posted
1 hour ago, PastorBob said:

Great tooling work on that!  Does it make the bill much heavier where it wants to ride down while wearing?

Thanks no it doesn't i thought it would but its not noticeable at all. 

11 hours ago, Handstitched said:

Well done  on that friend :specool:  ' If you can't buy it, make it ' 

HS

lol that comes from living in Wyoming to long. 

Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms.

“I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!

  • CFM
Posted
15 hours ago, DwightT said:

That looks awesome Chuck.

thanks!!

Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms.

“I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!

  • CFM
Posted
14 hours ago, MikeRock said:

Chuck,

Make Fred's like a Sherlock Holmes deerstalker with two brims.....  :))    Derned fine piece of red necking.  

Fred, do you have a pipe??

lol that would be awesome but what motif? i know redneck,

13 hours ago, bladegrinder said:

That's awesome!

 

1 hour ago, kgg said:

Nicely done.

kgg

 

12 hours ago, Gezzer said:

:thumbsup: Redneck  Chic !!!!

thanks guys!! 

Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms.

“I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!

  • Members
Posted

That's very cool! Great job on the tooling! 

  • CFM
Posted
9 minutes ago, MikeRock said:

Redneck, of course!  Walker & Hawkes British Tweed Deerstalker Hat Sherlock Holmes with Ear ...

?u=https%3A%2F%2Ftse2.mm.bing.net%2Fth%3

lol i could do redneck on one and English gent on the other that way you could just turn it around depending on which pub or bar you were in .

17 minutes ago, DaveP said:

That's very cool! Great job on the tooling! 

thank you!!

Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms.

“I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!

  • Contributing Member
Posted

What defines 'redneck' and what defines 'English Gent' ?

I'm pretty bad at dropping people or cultures in to definitions that are sort-of not very definitive

I'm not being silly, just stoopid

I mean 'viking', 'eskimo', 'native American' I can get but some others ??

Its the same with music - what goes into what style? I dunno with most

Al speling misteaks aer all mi own werk..

Posted (edited)
4 hours ago, MikeRock said:

Redneck, of course! 

Nice hat I guess for those that don't know if they are coming or going.

kgg

Edited by kgg

Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...