Members AzShooter Posted September 8, 2023 Members Report Posted September 8, 2023 I decided to combine my love of Archery and Leatherworking today. I ordered a pattern from Tandy but they no longer make it. Springfield Leather Co. had the same pattern batch so I was lucky enough to get one from them. I like the hip quiver with the forward rake. Stopped using the backwards rake years ago after forgetting to shoot an arrow on one flight. When I can see them I don't make such a stupid mistake twice. I used some old leather that I had. Seven ounce worked for the entire job except the base. That took some 10 ounce for the circle and then the 7 ounce to finish it up. The base was the hardest part of the job. All is Hand stitched. I'd enjoy any and all comments. Thanks for looking. Steven Quote
Members dikman Posted September 8, 2023 Members Report Posted September 8, 2023 Looks good to me. How does it attach to a belt? You have that "flap" on the left but I'm puzzled how it's used. I suppose more photos may have helped. Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Members Hags Posted September 9, 2023 Members Report Posted September 9, 2023 Pretty nice. I gave some old leather to a grandfather last Xmas to make quivers for his grandkids. Got a great thank you out of it. Looks good! Quote Not so retired RN. Living on the Washington Peninsula.
Members AzShooter Posted September 9, 2023 Author Members Report Posted September 9, 2023 2 hours ago, dikman said: Looks good to me. How does it attach to a belt? You have that "flap" on the left but I'm puzzled how it's used. I suppose more photos may have helped. The top of the quiver is stitched together forming a belt loop. It's above where the pen is. Quote
Members AzShooter Posted September 9, 2023 Author Members Report Posted September 9, 2023 Belt goes through loops marked in green. Quote
Members dikman Posted September 9, 2023 Members Report Posted September 9, 2023 Ahhh, ok, I see now, thanks. I didn't think it was hanging at such an angle. Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Members kiwican Posted September 27, 2023 Members Report Posted September 27, 2023 Great quiver! I've started making a few myself. Fun projects for sure Quote
Members MarshalWill Posted September 27, 2023 Members Report Posted September 27, 2023 That's a good design. Much better than over your shoulder or hanging straight down from your belt. Nice work. Quote
Members stitchgearhead Posted October 6, 2023 Members Report Posted October 6, 2023 Nice quiver! I see you're a field/trad archer...that style is usually preferred by target archers, but I think it's the most functional. The back-leaning style never seemed functional to me. I see what you mean about the base. Perhaps it would have been easier if the base was smaller ( making the quiver more conical overall)? Maybe even teardrop shaped? I never made a quiver, but I thought a lot about how to make one, and was part of the reason for starting my interest in leatherwork. I am nowhere skilled enough to be able to remark anything, but I would offer a couple of ideas for your next quiver, if it happens... 1 - Make the arrow pouch easily detachable from the flap. You could then change one of the parts while keeping the other. 2 - (pet peeve with quivers): make an internal bag/purse for the arrows, that could be easily removed for cleaning. It's amazing how much dirt can accumulate at the bottom... Overall, to the eyes of a newbie, this seems very nicely done. Congrats! Daniel Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.