Rossr Report post Posted January 2 Well I keep working on carving at times and still feel I have tons to learn. I'm working on this eagle. It's in process. It's going on the inside of a custom box lid which will be a gift. Leather is approx 8 inches by 14 inches. Open to thoughts on improving and how to gwt better at figure carving too. Backgrounding next. Ross Quote Share this post Link to post Share on other sites
Sinbad395 Report post Posted January 2 the detail in this is pretty amazing...how did you go about making the feathers on the body of the bird if I may ask. out standing work Quote Share this post Link to post Share on other sites
DieselTech Report post Posted January 2 Looks great! Nice work. Outstanding! Quote Share this post Link to post Share on other sites
Rossr Report post Posted January 3 Ok has to dry and then I need to decide how to finish it or what to finish it with I should say. It's chestnut wicket and kraig skirting leather so it has color. Anyway was asked to add a feather and initials so done. Quote Share this post Link to post Share on other sites
Rossr Report post Posted January 3 5 hours ago, Sinbad395 said: the detail in this is pretty amazing...how did you go about making the feathers on the body of the bird if I may ask. out standing work So the main body as well as well as some of the wings I used a needle. Basically same as using a modeling spoon but smaller. So for some I used the side other work the tip and just kept working through adding feathers. Thanks for the kind words 4 hours ago, DieselTech said: Looks great! Nice work. Outstanding! Thank you! Quote Share this post Link to post Share on other sites
Bert03241 Report post Posted January 3 Yep that's pretty awesome Quote Share this post Link to post Share on other sites
Rossr Report post Posted January 4 On 1/2/2024 at 10:45 PM, RockRash said: Thanks On 1/2/2024 at 11:59 PM, Bert03241 said: Yep that's pretty awesome Thank you Here is the final inset in the box. Ross Quote Share this post Link to post Share on other sites
chuck123wapati Report post Posted January 4 excellent job of it! Quote Share this post Link to post Share on other sites
Rossr Report post Posted January 4 2 minutes ago, chuck123wapati said: excellent job of it! Thanks. I also made the sheath and knife. The box is custom.made but not my work. Quote Share this post Link to post Share on other sites
chuck123wapati Report post Posted January 4 4 minutes ago, Rossr said: Thanks. I also made the sheath and knife. The box is custom.made but not my work. they are fantastic as well. beautiful rendition of a civil war era bowie. Quote Share this post Link to post Share on other sites
Doc Reaper Report post Posted January 4 That's good work, what did you use around the eagle Quote Share this post Link to post Share on other sites
dikman Report post Posted January 4 The detail work on the eagle is awesome. Nice touch on the knife guard, looks like eagle talons on the ends. Quote Share this post Link to post Share on other sites
DwightT Report post Posted January 4 Beautiful work. The feather detail is awesome. My hands start to cramp just thinking about how long that must have taken. /dwight Quote Share this post Link to post Share on other sites
rleather Report post Posted January 5 Wow, what an amazing project. Really nice work. Quote Share this post Link to post Share on other sites
Herbie Report post Posted January 5 very nice Quote Share this post Link to post Share on other sites
Rossr Report post Posted January 7 On 1/4/2024 at 1:47 PM, Doc Reaper said: That's good work, what did you use around the eagle Thanks Doc. I used a pebble background set of tools and kind feathered and faded it our into the plain area of the leather. On 1/4/2024 at 4:03 PM, dikman said: The detail work on the eagle is awesome. Nice touch on the knife guard, looks like eagle talons on the ends. Appreciate the kind words. Glad the knife guard translated to talons. That was my goal. I forged the guard and added in brass foe the talon part and shaped them to be talon like. I also carved the eagle head out of brass. By far the most complex knife I personally have made. It was quite an experience imo. Fun On 1/4/2024 at 4:04 PM, VStew said: Awesome! Appreciate that thank you Quote Share this post Link to post Share on other sites
Rossr Report post Posted January 7 On 1/4/2024 at 4:46 PM, DwightT said: Beautiful work. The feather detail is awesome. My hands start to cramp just thinking about how long that must have taken. /dwight Kind words thanks. I didn't time it but took several hours for sure. Surprisingly.it went faster than I thought. I look at some of the best carvers out there Jim Linnel being one and I know I have a lot to learn yet. On 1/4/2024 at 7:53 PM, rleather said: Wow, what an amazing project. Really nice work. Thanks! Quote Share this post Link to post Share on other sites
Rossr Report post Posted January 7 Not trying to turn this into a knife discussion but here are a few more shots of the knife. I had the damascus bilet made by a friend and I forged it to shape. Forged the talons and added the brass, added spaces in red white and blue the wood ha dle and carves the eagle head from solid brass. The sheath I also made and carved an eagle head on it and did 3 feathers overlayed in red white and blue. Just thought some folks might appreciate the look. We all make things and the help we all share here and tips etc I know have helped my limited work and skills. Best Ross Quote Share this post Link to post Share on other sites
YinTx Report post Posted January 19 What an awesome presentation set! So many skills in all of this. Nicely done! Quote Share this post Link to post Share on other sites
NatesLeatherGds Report post Posted January 19 Gorgeous carving. Quote Share this post Link to post Share on other sites
DoogMeister Report post Posted January 19 Awesome. Quote Share this post Link to post Share on other sites
WalterF Report post Posted January 20 Nice job and sweet presentation of a quality nice. Quote Share this post Link to post Share on other sites
Brokenolmarine Report post Posted March 27 Everything about the knife is impressive, I especially like the optical illusion of a depression the grain around the knot creates. When I make both knives and boxes the grain often choses the wood for me, and boxes are often built around their tops, chosen for the grain patterns. I'm just starting to get the hang of carving, vs. Tooling patterns. The Eagle looked great to me, though I would have added the extended talons for dramatic effect. Quote Share this post Link to post Share on other sites
