Members benlilly1 Posted October 22, 2013 Members Report Posted October 22, 2013 I need to glue veg tan leather to fiberglass. What are the best glues for this? It will be in the elements. I can't have this coming loose. The plan is to form the leather around the fiberglass and gluing what comes around on the bottom. This is going to set into the seat cover as it is shown in the photo which is another fiberglass form. Quote
Tree Reaper Posted October 22, 2013 Report Posted October 22, 2013 Two part epoxy like JB Weld. Quote
AndyL1 Posted October 22, 2013 Report Posted October 22, 2013 I've been using 3M #98 spray adhesive on my wallet liners. Seems to hold on very tough. At like 15 bucks per can it better be good! Andy Quote
Members Dwight Posted October 22, 2013 Members Report Posted October 22, 2013 The 2 part epoxy is probably stronger than Weldwood contact cement, . . . but my experience is that if you try to take apart two pieces of leather that have been properly joined with Weldwood, . . . you literally rip one or both of the pieces of leather. So, . . . long and short,.........the Weldwood held, . . . the leather separated. I'd try Weldwood first on a test piece. Just remember that if you are using it on the hair side, . . . you have to seriously rough that up with a wire brush or something. May God bless, Dwight Quote
Northmount Posted October 23, 2013 Report Posted October 23, 2013 You should also rough up the fibreglass so the cement can stick and bond to it. Smooth, especially shiny surfaces don't bond well and can be pulled apart. Tom Quote
Tree Reaper Posted October 23, 2013 Report Posted October 23, 2013 Two part epoxy is exclusive for bonding to fiberglass. It's like acrylic, not everything will bond to it so you have to use specific products. Quote
Members benlilly1 Posted October 23, 2013 Author Members Report Posted October 23, 2013 Thanks everyone! I have JB Weld so I'll experiment with that first. The flesh side will be adhering to the fiberglass so I should have a good bond. Quote
Tree Reaper Posted October 23, 2013 Report Posted October 23, 2013 JB is like steel when it hardens so try to keep it away from any needle work you may be doing after it sets up. Quote
Members Palermo Posted February 5, 2014 Members Report Posted February 5, 2014 Vinyl cement BArge infinity cement Quote
Members BDAZ Posted February 5, 2014 Members Report Posted February 5, 2014 Barge Cement is used for adhering leather and rubber soles,which have to be weather proof. That would be my choice. Easier to use than a two part, flexible and penetrating. Second roughing up the glass. Cya! Bob Quote
Members ikewineb Posted February 5, 2014 Members Report Posted February 5, 2014 I don't know, but...What about the fiberglass resin? Sorry for the off the wall thought. Quote
Members grumpyold Posted March 3, 2014 Members Report Posted March 3, 2014 We use PL500 on construction jobs. Once it sets up good luck ever getting it apart. I've used it to adhere leather on several items and it worked great. Quote
Contributing Member Samalan Posted March 3, 2014 Contributing Member Report Posted March 3, 2014 Barge is best IMHO Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.