Colt W Knight Report post Posted March 4, 2014 Just placed an order for a general purpose cocobolo burnisher from leatherburnishers.com http://www.leatherburnishers.com/Burnishers_for_Drills.html Anyone using these? or purchased one recently? Quote Share this post Link to post Share on other sites
veedub3 Report post Posted March 4, 2014 They are nice, I have a set and several members here also have them, and his mauls. He is also a member on this forum. Karina Quote Share this post Link to post Share on other sites
Troy I Report post Posted March 4, 2014 I purchased a complete set with holder...they work well. Got these about 8 months ago. Quote Share this post Link to post Share on other sites
Mudruck Report post Posted March 4, 2014 I have a set of the dremel burnishers and one of his mauls. They work ab-so-lutely freakin' great. You will not be sorry. The maul is the best Ive ever used and I'm debating getting a lighter one for light tooling. Quote Share this post Link to post Share on other sites
AndyL1 Report post Posted March 4, 2014 I have one chucked up in my drill press. You will be more than pleased! I LOVE mine. I just use some saddle soap on my edges and get a perfect edge all the time. Quote Share this post Link to post Share on other sites
camano ridge Report post Posted March 5, 2014 I have two for chucking in my drill press, I also have two of there mauls. Ed and Berry do great work and provide good service. I could not be happier with their products. Quote Share this post Link to post Share on other sites
Colt W Knight Report post Posted March 5, 2014 I like hearing these good things! I never knew what good burnished edges looked like til I joined this forum. I think it may become an obsession. Quote Share this post Link to post Share on other sites
mtroyalguy Report post Posted March 5, 2014 (edited) I ordered the the dremel set recently, and a maul. They should be here in the next week and half or so, expecting to see them hit Canada Customs anytime, then I will no longer be able to track them. I can't wait. I might take back my boyfriends artist's collection I made and redo the edges. Edited March 5, 2014 by mtroyalguy Quote Share this post Link to post Share on other sites
Colt W Knight Report post Posted March 5, 2014 Got my confirmation email, and Ed says it should ship in 2 weeks. Also confirmation email that my makers stamp should arrive next week. My makers mark is a throw off my guitar logo that I use for the custom guitars I build. Some of yall may recognize this name, especially if you are from KY. Quote Share this post Link to post Share on other sites
darrensomers Report post Posted April 15, 2014 Any update on your order? How do you like it? Quote Share this post Link to post Share on other sites
mtroyalguy Report post Posted April 15, 2014 They took longer than expected to arrive, but they are very pretty, I have tried them briefly, and they seem to work well, although I need to work on shaping my edges first. Quote Share this post Link to post Share on other sites
Colt W Knight Report post Posted April 15, 2014 Mine arrived just shy of a month after ordering. It is high quality, and works phenominally well. I can't believe how nice I can make edges in just a few minutes. If you have a sharp edge tool, you don't even need to sand if everything is even. Quote Share this post Link to post Share on other sites
retiredff Report post Posted April 16, 2014 So the lead time is over 2 weeks as stated on their web site? I ordered mine 3/27 and have not heard a word when the expected ship date will be. Quote Share this post Link to post Share on other sites
mtroyalguy Report post Posted April 16, 2014 When I ordered mine I heard nothing for a month until I emailed to inquire. Then I got a tracking # and it turns out it didn't ship until a month after I paid. I was not too happy about waiting that long with no information, particularly since the initial email implied it would be shipping within a few days of payment. Over all I am happy with the product and the dealer was polite and honest, I would have just prefered a bit more communication. I would order again and I would recommend them. Quote Share this post Link to post Share on other sites
LTC Report post Posted April 16, 2014 that is excessive. looks like i will be ordering mine elsewhere or make my own. Quote Share this post Link to post Share on other sites
silverwingit Report post Posted April 16, 2014 FWIW, after having owned one of their drill press models (yes, mine is chucked too and I love it), I recently ordered one of their hand-held burnishers online (think of the Tandy one on steroids in beautiful cocobolo). Relatively inexpensive and beautiful to hold and work with. It arrived within days of my online order. Very pleased with the product and the turn-around time. Thanks, Michelle Quote Share this post Link to post Share on other sites
retiredff Report post Posted April 16, 2014 I sent them an email asking about my order yesterday (4/15/14), when I get a reply I'll pass along any info for future purchases. Quote Share this post Link to post Share on other sites
retiredff Report post Posted April 17, 2014 Mine were shipped 4/16. Quote Share this post Link to post Share on other sites
LTC Report post Posted April 19, 2014 i ordered one from elsewhere due to the 2 week delay shown on leatherburnishers.com now. Quote Share this post Link to post Share on other sites
retiredff Report post Posted April 19, 2014 (edited) I ordered the full set for a dremel tool and it will be delivered 4/21/14, I placed the order 3/27/14. Edited April 19, 2014 by retiredff Quote Share this post Link to post Share on other sites
darrensomers Report post Posted April 29, 2014 OK so I ordered my Holster Burnisher on the 25th of March with a Ship date of 04/08/14 which is completely fine. But now I'm on my 4th e-mail looking for my order, I did get one response that it was shipped. Attached was a tracking number, unfortunately the tracking number shows that the order was shipped to Singapore!? I live in Canada. I sent another e-mail yesterday but no response yet. Quote Share this post Link to post Share on other sites
darrensomers Report post Posted April 29, 2014 Update! Just received an email and looks like they shipp my order and an order to Singapore the same day and gave me the wrong tracking number. I sould see it by Friday. Fingers crossed. Quote Share this post Link to post Share on other sites
LeatherWerks Report post Posted April 29, 2014 Ordered mine on March 30 and got them on April 28. Ed probably was preparing for the Sheridan show, and has more work than a one man show can handle...don't we wish we all had that problem. The product looks and works great. Steve Quote Share this post Link to post Share on other sites
LTC Report post Posted April 29, 2014 Ordered mine on March 30 and got them on April 28. Ed probably was preparing for the Sheridan show, and has more work than a one man show can handle...don't we wish we all had that problem. The product looks and works great. except for the fact that he replied in another thread recently to say he does not make these anymore and doesn't sound like he has anything directly to do with them now, so......it's not him that is lagging... Quote Share this post Link to post Share on other sites
Trox Report post Posted May 4, 2014 I ordered new bit for my burnisher motor from an English tool maker I know. It was a custom job, from my simple sketch and he did a great job. It fits my motor shaft perfectly and runs without any vibrations. He trowed in one of his awls as a gift too. Its a Little beauty. And of course for leather, its cocobolo and brass. This is Christmas all over again. Tor Quote Share this post Link to post Share on other sites
