Jump to content

Recommended Posts

  • Members
Posted

Hi everyone,

I thought it was about time to post my first topic here :) From knifemaking I got into leatherworking by chance about 1,5 years ago and this is, apart from some smaller decorations, my second carving project.

I started working on this strap in December already, but we all know how 'priority' works. I really enjoyed making it but I had a rough time making proper pictures, it's really hard to catch the colours and I still think it looks better in reality.

Here it is on my strat:

a_zps749e2fa0.jpg
b_zps0c4ac9ad.jpg
c_zps3db95c95.jpg
d_zps650aefb9.jpg
e_zpsa4aebe65.jpg
f_zpsfae7baee.jpg
g_zps27934cbe.jpg

Some pictures with my charming assistant ^^

h_zps2c8a7b7b.jpg
i_zps766e73fc.jpg

I really hope you like it of course, but comments of any kind are most welcome!

DSC_0089297x800_zpsd8b0d0a0.jpg

Frederiek

  • Members
Posted

I think you did a great job!

Did you go off a template or just kind of wing it?

  • Members
Posted

That is absolutely beautiful.

  • Members
Posted

very good carving!

  • Members
Posted

That is absolutely gorgeous! I know pretty much nothing about guitar straps, but that element you have at one end where another strap is woven through a few times? It really helps set off the roses (which are wonderfully done, too!).

  • Members
Posted

Very nice job, Frederiek! Love the 3 tone stain and the green leaf accent. That adjustment strap is nicely done. Great attention to detail. I can appreciate to effort you put in to that. It was well worth it!

Thanks for sharing,

Bill

  • Members
Posted

Very nice!

  • Members
Posted

Beautiful carving. What strikes me as odd, is that you have colored the leaves but not the roses, so the eye tends to gravitate to the leaves and it almost looks unfinished to my eye. I would have at least some color in the roses and used moe of a wash on the leaves.

Cya!

Bob

  • Members
Posted

Very nice Guitar strap,

The ROSES are nicely tooled.

The green and brown colored leaves and stems are a nice touch.

And too, I like the colored edges on the attachment strap.

  • Members
Posted

Great job!

... I especially like the way you colored it.

  • Members
Posted

I really like a tooled guitar strap, nice job.

Allan

  • Members
Posted

Nice strap.

  • Members
Posted

I think it looks great. I like the colors too. It brings out the roses, I think.

Nice.

  • Members
Posted
Thank you all very much for your kind words, it's much appreciated :)


Joe; something in between. I took measurements from my own strap, looked at an old Stohlman design for inspiration and then just went with the flow. I don't like to work completely unplanned but a bit of freedom often works well ;)


Bob; I first thought of dyeing the roses red (to match my guitar), but to me the 'white' stood out so nicely I kept it like this. I guess it's in the eye of the beholder :) But it is certainly something to think about, what to colour/emphasise and what not.
  • Members
Posted

Don't get me wrong, I think the strap is killer but even a slight translucent red in the roses would work better for me. I am a former fine arts professor so I guess I can't help going into critique mode.

Again, fantastic job!

Cya!

Bob

  • Members
Posted (edited)

Your tooling looks great. I have used the two tone strap adjustment deal before, bit yours looks outstandi ng against your main strap. I might steal your color pattern!

Wish I could tool flowers. Im awful at flowers.

Edited by Colt W Knight
  • Members
Posted
Hi Red,
The narrow end of the strap usually has two holes. Thsi one went to someone who's really tall (nearly 2 metres if I'm correct) so I did not bother with that second one since it would make it too short anyways. Then the narrow part has a broader ending with a slot, it sort of makes a loop and then you can weave the rest through the slots in the main part of the strap. If you want to have a longer or shorter strap you simply move it up or down. It looks like this:

DUR-S-K-B1.jpg

I'm 6' myself and I wear this strap at the lower hole and at it's shortest setting (how high or how low you carry it is a matter of preference), so you can safely presume that the standard size will do for your nephew :) If you send me a pm I'll send you a pdf with the basic template.

  • Members
Posted

That's a very nice strap! I love your tooling job, and the green really makes you notice the leaves. I see an argument for red, but I rather like that there's only two colors going on. Makes it less crazy.

  • Members
Posted

Fantastic job! I love the carving and coloring. How do you do the two-tone adjustment strap? I'd think I need to try that on my next one.

  • Members
Posted

Thanks!

I don't have a neat trick for the colouring unfortunately, just brushes and patience ;) To finish it off I used tan antique, just to fill in all the creases I didn't reach with the dye.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...