Members Red Cent Posted August 7, 2014 Members Report Posted August 7, 2014 They all told me I could buy patterns but I would have to make my own some time. I used a quilting half circle helper : http://1.bp.blogspot.com/_2ssunQr1FDY/S0LB5h22UAI/AAAAAAAADqc/JGKHLn6sJ_s/s1600-h/Cutting+Circle+Templates+from+Freezer+Paper.jpg and drew the lines with a pencil oh so lightly. And no one better say "Yeah, it looks like it". Quote
Members Eaglestroker Posted August 7, 2014 Members Report Posted August 7, 2014 I've yet to master that, yours looks very nice! Quote
Members Red Cent Posted August 7, 2014 Author Members Report Posted August 7, 2014 Thank you. Now the holster. Quote
Members Dwight Posted August 8, 2014 Members Report Posted August 8, 2014 Looks good, . . . but then again, . . . I'm partial, . . . always did like that design. May God bless, Dwight Quote
Members Sorefingers Posted August 8, 2014 Members Report Posted August 8, 2014 Really cool. Look forward to seeing the holster. I have been looking at the paterns created by black river laser for that stitching pattern but have yet to purchase. Anyone on this thread have any experience with those? I have heard good things but still on the fence. Quote
Members Red Cent Posted August 8, 2014 Author Members Report Posted August 8, 2014 It is really not hard to do with the quilting device or something similar. Draw two parallel lines. These lines represent how tall the ellipse and the diamond will be. Divide the two lines in half with another parallel line. This where everything "crosses". At some point on the bottom establish a point/mark. With the guide, all you do is line up two "points" in the groove of the circle chosen.. The point/mark established and the top groove of the circle on the top line. Hint: the biggest circle works best. With your pencil, start at the "point" and follow the groove (left or right) up to the top line and as you come over the top stop at the halfway line. At this point you have drawn one quarter of a diamond and one half of an ellipse. If you use a slender sharp pencil, stacked tolerances will happen. This will make your points come out a little off. Keep your pencil against one side (outer side of the grove or the inside of the groove) of the groove when ever you draw. This will help some. The circle I use is 10" in diameter. Quote
Chief31794 Posted August 9, 2014 Report Posted August 9, 2014 It is really not hard to do with the quilting device or something similar. Draw two parallel lines. These lines represent how tall the ellipse and the diamond will be. Divide the two lines in half with another parallel line. This where everything "crosses". At some point on the bottom establish a point/mark. With the guide, all you do is line up two "points" in the groove of the circle chosen.. The point/mark established and the top groove of the circle on the top line. Hint: the biggest circle works best. With your pencil, start at the "point" and follow the groove (left or right) up to the top line and as you come over the top stop at the halfway line. At this point you have drawn one quarter of a diamond and one half of an ellipse. If you use a slender sharp pencil, stacked tolerances will happen. This will make your points come out a little off. Keep your pencil against one side (outer side of the grove or the inside of the groove) of the groove when ever you draw. This will help some. The circle I use is 10" in diameter. Looks really good, nice work. Chief Quote
Members Steve75 Posted August 9, 2014 Members Report Posted August 9, 2014 Thanks for the explanation. I am looking forward to seeing the complete rig. Quote
Members Red Cent Posted August 9, 2014 Author Members Report Posted August 9, 2014 CFDA legal. No retention. Cylinder spins freely in holster. Quote
Members Steve75 Posted August 10, 2014 Members Report Posted August 10, 2014 Nice rig! Continuing the gunfighter stitching on the holster completes the rig nicely. Quote
Members Sorefingers Posted August 10, 2014 Members Report Posted August 10, 2014 Wow!! That is really awesome!! I love the stitching and the contrast between the outside and the liner. It makes it look really sharp. Quote
Members Red Cent Posted August 10, 2014 Author Members Report Posted August 10, 2014 Thank you. Quote
Members MonicaJacobson Posted August 10, 2014 Members Report Posted August 10, 2014 That is a great looking belt! Quote
Members Dwight Posted August 10, 2014 Members Report Posted August 10, 2014 I searched both pages, the margins, the headers, . . . anybody seen the holster? May God bless, Dwgiht Quote
Members camano ridge Posted August 11, 2014 Members Report Posted August 11, 2014 Dwight, the holster is pictured in post #12 of this thread. Quote
Members Dwight Posted August 11, 2014 Members Report Posted August 11, 2014 Dwight, the holster is pictured in post #12 of this thread. Thanks, Camano, . . . Good job, Red Cent, . . . as before, . . . that is one of my favorite patterns. Been seeing it for over 50 years on belts, purses, and stuff. Can't say as I ever got tired of seeing it. May God bless, Dwight Quote
Members leatherquestions Posted September 1, 2014 Members Report Posted September 1, 2014 Great looking rig! I'm from Rutherforton, N.C. just happen to be living in Kansas. Tip Quote
Members silverbullet Posted September 1, 2014 Members Report Posted September 1, 2014 Is the holster steel lined or rawhide, some quick draw holsters are? Quote
Members Red Cent Posted September 2, 2014 Author Members Report Posted September 2, 2014 This first one is not steel or rawhide lined. It has a full liner of 5/6 ounce. Cowbot Fast Draw does not allow steel lined rigs. It does allow rawhide. There holsters made for World Fast Draw made from fiberglass. The WFDA Assn. Is pretty lenient. They have what is called a fender rig. Not allowed in CFDA. CFDA is trying to stick as much as it can to emulate the "so called fastdraw" of the movies. However, if you watch a video of the CFDA in action, you begin to wonder about some of the rules. The silliest rule is the 20 degree forward cant. See if you can see what I mean in the video. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.