Contributing Member JLSleather Posted January 17, 2016 Author Contributing Member Report Posted January 17, 2016 Welcome fellas - and thanks for the 'attaboy' Pattern up for the mag pouch to match the S/W shield. With or without sweat guard. Sold at half price for the weekend because... well... cuz i can https://www.etsy.com/listing/264070359 Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Contributing Member JLSleather Posted January 18, 2016 Author Contributing Member Report Posted January 18, 2016 (edited) Woohoo... 1600 free Glock 19 / 23 holster pattern downloads! Got a picture, or a link to your picture? Let's see the finished goods Edited January 18, 2016 by JLSleather Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members Billy Hell Posted January 24, 2016 Members Report Posted January 24, 2016 Here are my JLS holsters made from his patterns.... Quote
Members bushpilotmexico Posted January 25, 2016 Members Report Posted January 25, 2016 Once again muchas gracias for the patterns....just finished these up. I took the liberty of extending the mag pouch pattern to accommodate a double and added the accent piece with the basket weave. Quote
Members Billy Hell Posted January 25, 2016 Members Report Posted January 25, 2016 Those are awesome! Great stitch work as well! Quote
Contributing Member JLSleather Posted January 25, 2016 Author Contributing Member Report Posted January 25, 2016 Once again muchas gracias for the patterns....just finished these up. I took the liberty of extending the mag pouch pattern to accommodate a double and added the accent piece with the basket weave. Shhoooot.. did I just get embarrassed? That's lookin' purdy good - but does that work okay with the bullets "backwards" ? Personal preference maybe -- Still, these designs are MEANT to be customized to suit you, so have at 'er Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members bushpilotmexico Posted January 28, 2016 Members Report Posted January 28, 2016 Shhoooot.. did I just get embarrassed? That's lookin' purdy good - but does that work okay with the bullets "backwards" ? Personal preference maybe -- Still, these designs are MEANT to be customized to suit you, so have at 'er Thanks for bringing that to my attention guess I fliped the pattern backwards when I drew up the double pouch design. Quote
Contributing Member JLSleather Posted January 29, 2016 Author Contributing Member Report Posted January 29, 2016 So,.. how much interest do we have for "80/20" pancake holsters? By that, I mean most of the pancake styles you see are "flat", or "50/50". "FLAT" .... with the back piece perhaps laid on a table and the "front" or outside piece molded over the weapon. The curve of the body is largely done with the 'wings' ONLY; "50/50"... involves two pieces -- front and back - which are quite similar. The stitch seams are basically a 'meet in the middle' situation. Lately, I get requests for holsters with some curve, but with the seams closer to the body. SOME people (usually with narrow waists) find that the smaller guns can tend to bind at the front site on a '50'50' holster. Just the nature of pancake holsters, which is made worse the closer the slots are to the firearm. So, it becomes a trade-off... trading function with belt real estate (foot print). The answer it would seem is an '80'20' holster. Accomplished by making the same general type construction as the '50/50' but with the front or outside piece made larger to wrap partially around -- past the center line of the weapon. Perhaps the easiest way to describe it is to show it (?). Looking down the back end of the Glock 43 RH. Some 'natural' curve in the rig, NOT 'flexed' around to accomodate a belt or line up the slots (which is done frequently and leads to the issue described). Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Contributing Member JLSleather Posted February 6, 2016 Author Contributing Member Report Posted February 6, 2016 A word about Etsy and how it works over there ... These pattern files are currently available on Etsy due to bookkeeping concerns (I pay a small fee, but I don't calculate international taxes). Some of you are now asking .. SO !@!@$#$%!??! There are files available FREE on my web site, which are also available on etsy for a small fee (like 50¢). This is not a mistake, it's just that they can't be listed over there for free,and I'm not even allowed to tell you that they are available "off - etsy" in the listings. BUT, they are there so those who are downloading other files ANYWAY can just get those there without going to another site. SO THEN... DO check the web site for the FREE ones FIRST ... Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members mrfixit Posted February 7, 2016 Members Report Posted February 7, 2016 So,.. how much interest do we have for "80/20" pancake holsters? By that, I mean most of the pancake styles you see are "flat", or "50/50". "FLAT" .... with the back piece perhaps laid on a table and the "front" or outside piece molded over the weapon. The curve of the body is largely done with the 'wings' ONLY; "50/50"... involves two pieces -- front and back - which are quite similar. The stitch seams are basically a 'meet in the middle' situation. I would be interested to see the 80/20. I've made a few holsters for myself only, all for 1911 or Hi Power for duty wear plain clothes. I use the same pattern for both weapons, molding is the only difference. Quote
Members Tigdim Posted February 7, 2016 Members Report Posted February 7, 2016 So,.. how much interest do we have for "80/20" pancake holsters? I am interested in a 80/20... in fact that is the one of the reasons I am here. I was google searching for patterns, specifically 80/20 patterns. ( although I was not sure the correct terminology until I got to the quoted post) Aaron Quote
Contributing Member JLSleather Posted February 7, 2016 Author Contributing Member Report Posted February 7, 2016 (edited) '80/20' may not be in any textbooks.. just sumthin seemed like it might make sense to folks A few revolver holsters to finish up and a couple of belts to carve, and maybe I can get back to the "drawing board".... Edited February 7, 2016 by JLSleather Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Contributing Member JLSleather Posted February 9, 2016 Author Contributing Member Report Posted February 9, 2016 (edited) Originally planned for some gal's purse, simple enough to make this fit in a front pocket ... Sig_P938_Pok1.pdf OOOPS... that makes this holster, even tho "reinforcement' is spelled no so goody ... Edited February 9, 2016 by JLSleather Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Contributing Member JLSleather Posted February 22, 2016 Author Contributing Member Report Posted February 22, 2016 Sig P938 Avenger download up on the site now. $0.00, + tax if you're in IA Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members Miss Denise Posted February 23, 2016 Members Report Posted February 23, 2016 Thank you so much for the patterns! Still learning but i will keep trying! Quote
Contributing Member JLSleather Posted February 23, 2016 Author Contributing Member Report Posted February 23, 2016 Glock 42 Avenger style holster pattern now available, too (HINT: look under 'glock"). Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members Jarhead44706 Posted February 24, 2016 Members Report Posted February 24, 2016 Thank You Sir.... Class Act Quote
Contributing Member JLSleather Posted February 24, 2016 Author Contributing Member Report Posted February 24, 2016 Welcome -- more coming soon! Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Contributing Member JLSleather Posted February 26, 2016 Author Contributing Member Report Posted February 26, 2016 WOO HOO ... 2000 downloads of the G19 / 23 pancake holster pattern. Still, you boys n girls slipping on the G42...less than 100 downloads! Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Contributing Member JLSleather Posted February 26, 2016 Author Contributing Member Report Posted February 26, 2016 Oh, yeah... and also the very quick and easy POCKET holster for the Glock G42 .. don't forget that one Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Contributing Member JLSleather Posted February 29, 2016 Author Contributing Member Report Posted February 29, 2016 Which ya think is more popular, and you'd prefer to have on ya --- 1911 3", or the Glock 43? I mean, if you had somebody was fixina give ya one, as in free, which way do ya go? Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members Sporty1 Posted February 29, 2016 Members Report Posted February 29, 2016 1911 3" , been looking at these lately! Quote
Members Tigdim Posted February 29, 2016 Members Report Posted February 29, 2016 I would go with the 1911 over the Glock every time... but that is just me. Aaron Quote
Members chasman52 Posted February 29, 2016 Members Report Posted February 29, 2016 1911 cause I already got an M&P shield. I like 1911's Quote
Members rockus Posted February 29, 2016 Members Report Posted February 29, 2016 1911 3" stopping power Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.