Members dikman Posted December 20, 2016 Members Report Posted December 20, 2016 I take the back roads, but a lot of them have reduced speed limits now. Still, riding the Bonnie (2005 model, carbies, no computer) takes me back to the 60's/70's. In many ways a much simpler time. And yeah .
Members Darren Brosowski Posted December 21, 2016 Members Report Posted December 21, 2016 On 20/12/2016 at 10:28 PM, dikman said: I take the back roads, but a lot of them have reduced speed limits now. Still, riding the Bonnie (2005 model, carbies, no computer) takes me back to the 60's/70's. In many ways a much simpler time. And yeah . Last time I drove through SA was a back road to Ceduna and sat in the middle of the road at night doing about 180. The guy I was taking down there was shitting himself as he thought we would get booked by the coppers. "No wukkas mate, the road is dead flat and no trees so we can see about 5km ahead of us. Mind you if a Roo or Wombat walks out we are ed"
Moderator Wizcrafts Posted December 21, 2016 Moderator Report Posted December 21, 2016 I think t 4 hours ago, Darren Brosowski said: Last time I drove through SA was a back road to Ceduna and sat in the middle of the road at night doing about 180. The guy I was taking down there was shitting himself as he thought we would get booked by the coppers. "No wukkas mate, the road is dead flat and no trees so we can see about 5km ahead of us. Mind you if a Roo or Wombat walks out we are ed" I think that the Dingo ate your baby!
Members cdthayer Posted December 21, 2016 Members Report Posted December 21, 2016 8 hours ago, Darren Brosowski said: doing about 180 Never have been anywhere close to that fast on a road, but I have done a few "one-eighties" on roads covered with black ice over the years.... CD in Oklahoma
Moderator Wizcrafts Posted December 21, 2016 Moderator Report Posted December 21, 2016 14 minutes ago, cdthayer said: Never have been anywhere close to that fast on a road, but I have done a few "one-eighties" on roads covered with black ice over the years.... CD in Oklahoma 180 kph = ~ 112 mph
Members Singermania Posted December 21, 2016 Members Report Posted December 21, 2016 Darren only in your wildest dreams could you get your car up to 180kph...hhaha
Members dikman Posted December 21, 2016 Members Report Posted December 21, 2016 (edited) Umm, tail wind? As a much younger person I used to work in the country and regularly sat between 90 - 100 mph (nice big Ford V8). Wouldn't dream of it now, too many other idiots (and police cameras) out there now. Came close to 180 kms/hr on a bike once, scared the daylights out of me 'cos our main roads are, basically, crap! I'm a much more sedate driver now. I guess I've been lucky enough to survive my earlier years and would like to keep it that way. Black ice? No thanks, you can keep it. Spectre, you still out there mate? Still waiting to hear from you. You asked a question that, thus far, no one can answer. I guess we still don't understand exactly what the question is? Edited December 21, 2016 by dikman
RockyAussie Posted December 22, 2016 Report Posted December 22, 2016 19 minutes ago, MADMAX22 said: Drop bear got em. SHHHHHHush we been trying to keep quite about them
Members dikman Posted December 22, 2016 Members Report Posted December 22, 2016 Yeah, it's an unspoken agreement amongst the media that they don't publicize "drop bear" incidents, otherwise the tourists would keep away in droves. You'll hear about kidnappings, murders, shark attacks , croc attacks (and stoopid politicians) but you'll never hear about drop bear attacks. They can smell tourists from miles away!
Members TonyRV2 Posted December 22, 2016 Members Report Posted December 22, 2016 Are drop bear hunted similar to the way snipes are hunted?
RockyAussie Posted December 23, 2016 Report Posted December 23, 2016 No you should be safe mate. Can't talk just now the dingo needs another feed..........
Members catskin Posted December 26, 2016 Members Report Posted December 26, 2016 Since you KNOW so much, and can do anything why not just grab you tools and build your own machine. Then it will do everything PERFECTLY EVERY time. You talk about how wrong the machines you've seen pictures of are, if you know how wrong they are you have to know how to make them right.
Members Darren Brosowski Posted December 27, 2016 Members Report Posted December 27, 2016 On 22/12/2016 at 8:24 AM, Singermania said: Darren only in your wildest dreams could you get your car up to 180kph...hhaha It was a hire car - next best thing to a Formula One racer
Members Yetibelle Posted December 27, 2016 Members Report Posted December 27, 2016 Not sure if this already came up...in this heavy existential conversation over flat bed vs. cylinder arm machines; but most cylinder machines have table tops that convert them into a flat-beds. So you then have one machine that can do both. It's like Sewing Machine Magic!
Members gottaknow Posted December 28, 2016 Members Report Posted December 28, 2016 I've read this thread 27 times and still don't understand THE question.
Moderator Wizcrafts Posted December 28, 2016 Moderator Report Posted December 28, 2016 4 minutes ago, gottaknow said: I've read this thread 27 times and still don't understand THE question. This topic is similar to Bill Clinton saying "that depends on what your definition of 'is' is!" To my understanding, the OP wanted to know how to know what he needs to know, in order to determine what sewing machine he should look for, in the event he has a project come up that requires a particular type of machine. This "is" my understanding of what his "is" is.
Members gottaknow Posted December 28, 2016 Members Report Posted December 28, 2016 12 minutes ago, Wizcrafts said: This topic is similar to Bill Clinton saying "that depends on what your definition of 'is' is!" To my understanding, the OP wanted to know how to know what he needs to know, in order to determine what sewing machine he should look for, in the event he has a project come up that requires a particular type of machine. This "is" my understanding of what his "is" is. Got it! In other words, he just needs to be old like us with our combined years of experience. That would be a good starting point. In all seriousness, I think your pinned thread on leather machines is outstanding. Regards, Eric
RockyAussie Posted December 28, 2016 Report Posted December 28, 2016 5 hours ago, gottaknow said: Got it! In other words, he just needs to be old like us with our combined years of experience. That would be a good starting point. In all seriousness, I think your pinned thread on leather machines is outstanding. Regards, Eric Amen
Members Darren Brosowski Posted December 29, 2016 Members Report Posted December 29, 2016 12 hours ago, gottaknow said: Got it! In other words, he just needs to be old like us with our combined years of experience. That would be a good starting point. In all seriousness, I think your pinned thread on leather machines is outstanding. Regards, Eric If he had half a brain and would listen to advice it may also help. The OP is beyond help as he wants a machine to sew everthing from silk to saddles at 30 stitches per minute to 4500 spm. Possibly he also wants it to do off-the-arm chain stitch and edge carpets.
RockyAussie Posted December 29, 2016 Report Posted December 29, 2016 How bout if we cross breed a patcher with a blake and make the horn swivel 60% as well........or would we just end up cross eyeddddd
Members Darren Brosowski Posted December 29, 2016 Members Report Posted December 29, 2016 1 hour ago, RockyAussie said: How bout if we cross breed a patcher with a blake and make the horn swivel 60% as well........or would we just end up cross eyeddddd Stop sharing my secret Research and Development projects you bastard
Members Constabulary Posted December 29, 2016 Members Report Posted December 29, 2016 (edited) This is one of the most useless threads in the whole sewing machine section. I´d suggest deleting it as there is no sense in it tat all. Or at least close it with an Admin´s comment at it´s end. Edited December 29, 2016 by Constabulary
Moderator Wizcrafts Posted December 29, 2016 Moderator Report Posted December 29, 2016 6 hours ago, Constabulary said: This is one of the most useless threads in the whole sewing machine section. I´d suggest deleting it as there is no sense in it tat all. Or at least close it with an Admin´s comment at it´s end. I agree. However, this thread was not totally useless. It demonstrates the futility of trying to answer existential or theoretical questions about industrial sewing machines that are basically chunks of metal built for specific tasks. To make matters worse, the machines we use to sew leather are big, clunky beasts. Nothing beats hands on experience and actual use and experimentation. Seeing as how we have explored every nuance of the whys and wherefores of this strange topic, I am closing it. It was both frustrating and fun at times.
Recommended Posts