Members VMTinajero Posted March 21, 2017 Members Report Posted March 21, 2017 I'm with JLSleather- you'd be amazed at the results plain ol' water will give you... Quote
Members slipangle Posted March 22, 2017 Members Report Posted March 22, 2017 Right-O JLS, I was just curious about the mention of the motor speed. Never seen one that runs at 6000 rpm. Unless Andy is ralking about a Dremel or other hand held device. Maybe Andy was speaking of SFPM. But that still seems awfully fast to me. I run the lignum vitae burnishers I made on my metal lathe..maybe around 1000-1500 rpm or so. Quote
MADMAX22 Posted March 23, 2017 Report Posted March 23, 2017 Ya dont need 6k rpm. Heck you can burnish by hand if necessary. Quote
Members johnv474 Posted March 23, 2017 Members Report Posted March 23, 2017 (edited) What you need is heat, moisture, and, optionally, color. For it to last, you want some protection. A coiled up belt can have the entire edges dampened with a kitchen sponge within seconds. Flip it, repeat. If you use a 1/4" nap trim painting pad or sponge dauber you could also dye the edges quickly, if you cared to. There are many options but dampening the edge makes a big difference for me. Saddle soap helps keep the moisture in place. Moisture allows the fibers to form and compress to the shape I want. Usually I burnish by hand and just use a scrap of cloth or a ceramic electrical insulator from old knob and tube wiring... since it was free. Edited March 23, 2017 by johnv474 wording Quote
Members johnv474 Posted April 6, 2017 Members Report Posted April 6, 2017 If you want fast and effective edge treatments, look at what are done by larger-production manufacturers. Usually burnishing is not involved (in the usual sense we talk of it). It's more common to just use edge dye or similar and be done with it. I am not aware of a fast and also effective and also inexpensive approach. But if the cost isn't what matters then look at leather flap wheels ($90) and motor-mounted horsehair brush wheels ($90) and the various burnishing inks or waxes that are available from Fiebings or others. Last I saw, a machine for this purpose cost a few thousand dollars, used, and included three or four sanding stations. Shoe repair shops have them. That said, even with a machine it takes skill and practice to do it well... even if it could be faster. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.