Members ColoradoGirl Posted February 1, 2018 Members Report Posted February 1, 2018 Hello from Wyoming (name tells you I'm a transpant). Need some guidance to tool this small detail I'm using as an onlay. Horses mane, and all the nooks an crannies, are challenging me. Will be using this logo onlayed/tooled onto smaller items, to include totes, headcovers, wallets, etc. Hand painted, to date. Mostly using canvas and chrome tanned leathers. Size is no more than 4" high, as seen in pic. Need to go down to 3". Recommendations to find smallest tools, and techniques to consider. I appreciate any help. Tammy Quote
Rockoboy Posted February 1, 2018 Report Posted February 1, 2018 Your articles might be canvas and chrome tanned leather, but your onlay will need to be made from vegtan. I am sure somebody with more knowledge than I, will soon tell you this again. The logo you have displayed looks pretty good. The only slight defect (for want of a better term) is the cowboy's waist. It looks way to skinny. The printed logo shows it better, where his waistcoat vest is wider than his waist. Quote
terrymac Posted February 1, 2018 Report Posted February 1, 2018 (edited) Barry King would be my source. He makes his bevelers in some awfully small sizes which is what you need. They are also steeper angled which means you will not be affecting surrounding areas. Look at his round bevelers, I can see several areas, especially in the mane, where they would really work well. I would also look at making it a inverse figure, that is beveling to the inside of the figures. Would make dying a whole lot easier. Hope this helps, Terry Edited February 1, 2018 by terrymac Additional comments Quote
Members cowboycolonel Posted February 1, 2018 Members Report Posted February 1, 2018 If this is to be used as a logo, maybe you'd think of investing in a die with all appropriate cuttings already laid out. That way you could simply bevel where necessary, and could save lots of time and repetition. If it's not, the go back to the original for locations of hair and other details, and get a modeling tool. IMHO. Quote
Jaymack Posted February 1, 2018 Report Posted February 1, 2018 Leatherhead99 can make an logo to emboss for you. Look for some of his posts in the "for sale" section. Quote
Members buzzardbait Posted February 1, 2018 Members Report Posted February 1, 2018 Get the book Figure Carving by Al Stohlman. It shows the tools and techniques for the fine details . Tandy has the book. Quote
Mark842 Posted February 2, 2018 Report Posted February 2, 2018 I agree with Jaymack. Get one of these stamp makers to make you a stamp out of Delrin or similar so you can just stamp the whole thing in one shot and be done. https://www.google.com/search?q=delrin+leather+stamps&client=firefox-b-1&source=lnms&tbm=isch&sa=X&ved=0ahUKEwiK6Pv0_IXZAhVI22MKHR7FBDgQ_AUICygC&biw=1536&bih=733 Quote
alpha2 Posted February 2, 2018 Report Posted February 2, 2018 I don't do much "small" stuff, but the previous poster seem to have steered you in the right direction. Don't worry about being a transplant, if Colorado keeps it up, I'll be joining you up there. Quote
Members Wyowind Posted February 2, 2018 Members Report Posted February 2, 2018 Not to rain on your idea but you mention putting the logo on many different small items. If you are planning on selling them, be careful because the "Steamboat" logo (the bucking horse and cowboy) are registered trademarks to the State of Wyoming and the University of Wyoming. The logo can be used but I believe you have to go through steps to legally do it. Here is a link to a site that discusses using the trademarked logo. http://www.uwyo.edu/uwlicensing/licensing-applications/index.html Good luck with it, Steamboat is a awesome logo! Quote
Members ColoradoGirl Posted February 2, 2018 Author Members Report Posted February 2, 2018 To Wyowind, got it done, hence, exactly why I'm learning to do it right. . Thank you all. I have thought about a die, and will check all the leads. Inversion idea sure could make it better. So glad this is such a great forum for resources and coaching. Tammy Quote
Members Wyowind Posted February 2, 2018 Members Report Posted February 2, 2018 25 minutes ago, ColoradoGirl said: To Wyowind, got it done, hence, exactly why I'm learning to do it right. . Thank you all. I have thought about a die, and will check all the leads. Inversion idea sure could make it better. So glad this is such a great forum for resources and coaching. Tammy Alright! Way to go. I know they are pretty protective of it and didn't want to see you get into any potential legal spats... Quote
Members ColoradoGirl Posted February 2, 2018 Author Members Report Posted February 2, 2018 Wyowind - they are indeed. Had to provide an actual tooled piece before final approval. Whew, I passed. Protective heads up ALWAYS welcome. T Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.