Members dikman Posted March 25, 2019 Members Report Posted March 25, 2019 I've been trying to convince myself to learn 3D modelling so I could make a maker's mark stamp, but without success (every time I try it all gets too hard!). So, having recently bought one of those dinky little laser engravers I thought "I wonder....". A bit of doodling later with photoshop and I got something that sort of works. Not sure how practical it is yet. The round one gives better detail on the cactus but smaller printing, the oval one is probably a better design, with larger lettering, but then I loose detail on the cactus. A work-in-progress, as they say. Oh, and burning into garment leather (chrome tan, I guess) stinks!!!!!!! Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Rockoboy Posted March 27, 2019 Report Posted March 27, 2019 On 3/25/2019 at 11:32 AM, dikman said: burning into garment leather (chrome tan, I guess) stinks I could be wrong, but I believe burning chrome tan leather releases cyanide gas. Quote Kindest regards Brian "Whether you think you can or whether you think you can't, you are right" Henry Ford Machines: Singer 201p, Kennedy, Singer 31K20, Singer 66K16 ("boat anchor" condition), Protex TY8B Cylinder Arm (Consew 227r copy), Unbranded Walking Foot (Sailrite LSV-1 copy)
stelmackr Posted March 27, 2019 Report Posted March 27, 2019 https://www.firerescue1.com/fire-rehab/articles/283219-Cyanide-poisoning-poses-hidden-threat/ Quote Bob Stelmack Desert Leathercraft LLC Former Editor of the, RawHide Gazette, for the Puget Sound Leather Artisans Co-Op, 25 years of doing it was enough...
Contributing Member LatigoAmigo Posted March 27, 2019 Contributing Member Report Posted March 27, 2019 6 hours ago, Rockoboy said: I could be wrong, but I believe burning chrome tan leather releases cyanide gas. That concern points out the importance of proper ventilation. Quote
bermudahwin Posted March 27, 2019 Report Posted March 27, 2019 1 hour ago, LatigoAmigo said: That concern points out the importance of proper ventilation. And relevent masks, if you must laser such materials. I'd avoid them and pvc too. H Quote No longer following it.
Members GrantNOVAROBOTICS Posted March 27, 2019 Members Report Posted March 27, 2019 Word for the WIZE - as some have already mentioned, & as a seasoned 3d Printer user & Lasers too.... MOST of the gasses released by the act of Lazing & 3d Prnting include Formaldehyde, Arsonide, Cyanide + gasses of 100% saturated Sulphuric Acid vapour from Lazing PVC plastics. The Sulphuric vapour from Lazing PVC will take out your eyes & vision in seconds - permanently ! Equally toxic & poisonous is to laser MDF wood, which gives off ALL of the above AND some carcinogenic toxins too, for good measure. Ventilation extraction is a MUST. Stay safe - Stay above ground. Quote
bermudahwin Posted March 27, 2019 Report Posted March 27, 2019 Stay safe. H Quote No longer following it.
Members dikman Posted March 27, 2019 Author Members Report Posted March 27, 2019 Thanks folks. The chrome-tanned that I referred to was a very small piece and I just wanted to see what the engraving looked like on something black. The process was carried out right next to an open door, and I've already made a separate fan to blow towards the door. I'll be mostly working with veg-tan anyway (and definitely no more engraving of chrome-tanned). Grant, thank you for the concise explanation of what is released from those products, that sort of info is usually buried away under too much writing! I'm sure there are others here who will appreciate it too. Besides, I can't afford to lose any more brain cells as I think I lost too many during my younger drinking days!! Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Members Smartee Posted April 12, 2019 Members Report Posted April 12, 2019 Thanks for this! Was looking at some of these and didn't even consider exactly what would be in the fumes - and I'm a former welder. Quote
Members jrjr2u Posted June 5, 2019 Members Report Posted June 5, 2019 (edited) I engrave leather and cut it too but for a makers mark, I would suggest getting some cast acrylic. Engrave your design into it and it will stamp wet leather nicely. Do it all the time and I use a 1/2 ton arbor press for the stamping process. Harbor Freight cheapie works fine. You can make up any stamps you like. Just keep engraving it till the design is 3/16 or so and you will be good. Once you get your settings down it can be done in one pass. I find it best if the acrylic is 1/2" thick for strength but you can glue 2 - 1/4" together to get the thickness and 1/4 is much easier to cut. I have a 50 watt co2. Probably won't work so good on thin chrome tan but works wonders on veg. Brain cells? I knew I had some around here somewhere.... let me check Edited June 5, 2019 by jrjr2u Quote ~My leather machines~ Consew 206RB-4 Chinese shoe patcher 50W laser
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.