Rolandranch Report post Posted February 8, 2020 (edited) Hi all! Here's a knife sheath I did a little bit ago. Always think the airbrush is fun to play with. Stitched on my CB4500. I really need to get some large slot punches because punching holes and cutting between ain't my cup of tea. Also, anyone going to the Southwest Leather Workers Trade Show in Prescott this year? I'll be entering saddle #2 in the emerging saddle maker contest. All the best, Ryan Edited February 8, 2020 by Rolandranch Quote Share this post Link to post Share on other sites
fredk Report post Posted February 8, 2020 Thats another nice piece of work. Bestest wishes for the contest Quote Share this post Link to post Share on other sites
akguy59 Report post Posted February 8, 2020 Love that sheath and judging by the things you've posted here you will do great in the competition. Quote Share this post Link to post Share on other sites
Rolandranch Report post Posted February 9, 2020 @fredk @akguy59 Thanks guys! Here's a sneak peek of the swells of the saddle I'm working on. Only 5% of the grade goes toward decoration so I got put my swivel knife down and make sure I'm getting the lines right. Ryan Quote Share this post Link to post Share on other sites
Albob Report post Posted February 9, 2020 That's a great looking sheath. I'll be there, taking a class on the 25th Quote Share this post Link to post Share on other sites
Rossr Report post Posted February 10, 2020 Sheath looks great...and the saddle.wow Quote Share this post Link to post Share on other sites
Outfitr Report post Posted February 10, 2020 I hear ya on the slots. The punches are pretty expensive too. I've been using a sharpened carpenters chisel to cut between the punched holes. Really cleaned up the slots.....until I can buy some punches. Quote Share this post Link to post Share on other sites
rktaylor Report post Posted February 10, 2020 (edited) Nice sheath and saddle. Your tooling is awesome. Good Luck at Prescott. I went last year and it was worth every penny and minute. The 1000 miles one way was a tough drive on an old man. Though it is 50 miles closer than Sheridan. Randy Edited February 10, 2020 by rktaylor updated Quote Share this post Link to post Share on other sites
Vikefan Report post Posted February 18, 2020 (edited) Wow.. That saddle is awesome work..!!! Question... You really should put stitching on each side of the blade on that sheath, so as to not stitch it in can cut your outside stitching, plus it will retain the knife better if done that way.. JMO. Please see the one I did a while ago. See Attachment. Vikefan. Edited February 18, 2020 by Vikefan Quote Share this post Link to post Share on other sites
Rolandranch Report post Posted February 18, 2020 29 minutes ago, Vikefan said: Wow.. That saddle is awesome work..!!! Question... You really should put stitching on each side of the blade on that sheath, so as to not stitch it in can cut your outside stitching, plus it will retain the knife better if done that way.. JMO. Please see the one I did a while ago. See Attachment. Vikefan. Thank you! I see what you're saying. I dont think it will cut through the stitches because I added a welt. It's not necessary for folding knives but I wanted to be sure it fit snug and didn't cut any stitches. Your sheath looks fantastic by the way! Ryan Quote Share this post Link to post Share on other sites
AwlShucks Report post Posted February 21, 2020 Nice work Ryan. Good luck at the show. Quote Share this post Link to post Share on other sites
