Members steelhawk Posted February 15, 2020 Members Report Posted February 15, 2020 My current tool rack is too small. It has about 120 holes and I need about 80 more. I can make a larger one, but I'm wondering if I want a different design. Looking at the tool racks posted here, I've seen some racks with larger holes that hold multiple tools. For those with that type of rack, do you like it? Is it better than your old rack with individual holes? Quote www.bearriverholsters.com
Members HaloJones Posted February 15, 2020 Members Report Posted February 15, 2020 What sort of rack / tools are you referring to? I assume a block to hold stamping tools? Quote
Members steelhawk Posted February 15, 2020 Author Members Report Posted February 15, 2020 Yes, a block to hold stamping tools. Quote www.bearriverholsters.com
Contributing Member fredk Posted February 16, 2020 Contributing Member Report Posted February 16, 2020 I have three of these for my stamping tools. Yes. I like them. I have the tools in rows, alpha-numerically sorted Quote Al speling misteaks aer all mi own werk..
Members steelhawk Posted February 24, 2020 Author Members Report Posted February 24, 2020 This is what I currently use, which is too small. I have a fourth tool rack elsewhere in my shop that I made as a teenager, longer ago than I care to remember that I used forever. There are over 60 tools still in it. I want to get down to one tool rack for my stamps. Next picture. I found this tool rack somewhere on this forum and am considering making something similar, but am not sure I will like using it. My question: If you use something like this, how do you like it? Quote www.bearriverholsters.com
Members Rhale Posted February 24, 2020 Members Report Posted February 24, 2020 Check out Dave Swallow tool racks, a little on the pricey side but very nice ! I have one that holds 296 tools and I love it. I believe you can find them under Swallow leather tools. Rodney Quote
Northmount Posted February 25, 2020 Report Posted February 25, 2020 20 hours ago, steelhawk said: Next picture. I found this tool rack somewhere on this forum and am considering making something similar, but am not sure I will like using it. My question: If you use something like this, how do you like it? I use a couple that sit on my table with the large holes. I group my tools and put like tools together. Tom Quote
Members wheeldawg Posted March 16, 2020 Members Report Posted March 16, 2020 (edited) I made this a little while back to hold my stamps, lace and other things. It rotates around the center on the sprocket and the blocks swivel to stay upright. It holds 47 stamps per block for a total of 188. It was fun to make. I'm not sure I would like more than one per hole, but never tried it. I may make something like you posted above next and see how I like that. Edited March 16, 2020 by wheeldawg Quote
Members dikman Posted March 16, 2020 Members Report Posted March 16, 2020 Now that's what I call funky! Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.